| 1-8/8每页显示: | |
|
|
|
暂不可售: Single-beam miniature photoelectric sensor, ideal for installing in frames or contours, Integrated circuit, Plug-in style housing for 13 mm hole, Dark on version, Construction type(S2): Cylindrical type, flat, Light source: IRED, Light type: modulated infrared light , 880 nm, Operating voltage: 10 ... 30 V DC, Switching type: light-on, Signal output: 1 NPN output, short-circuit protected, reverse polarity protected, open collectorfa |
|
|
|
|
暂不可售: Single-beam miniature photoelectric sensor, ideal for installing in frames or contours, Integrated circuit, Plug-in style housing for 13 mm hole, Dark on version, Construction type(S2): Cylindrical type, flat, Light source: IRED, Light type: modulated infrared light , 880 nm, Operating voltage: 10 ... 30 V DC, Switching type: light-on, Signal output: 1 PNP output, short-circuit protected, reverse polarity protected, open collectorfa |
|
|
|
|
暂不可售: Single-beam miniature photoelectric sensor, ideal for installing in frames or contours, Integrated circuit, Plug-in style housing for 13 mm hole, Dark on version, Construction type(S2): Cylindrical type, flat, Light source: IRED, Light type: modulated infrared light , 880 nm, Operating voltage: 10 ... 30 V DC, Switching type: dark-on, Signal output: 1 NPN output, short-circuit protected, reverse polarity protected, open collectorfa |
|
|
|
|
暂不可售: Single-beam miniature photoelectric sensor, ideal for installing in frames or contours, Integrated circuit, Plug-in style housing for 13 mm hole, Dark on version, Construction type(S2): Cylindrical type, flat, Light source: IRED, Light type: modulated infrared light , 880 nm, Operating voltage: 10 ... 30 V DC, Switching type: dark-on, Signal output: 1 PNP output, short-circuit protected, reverse polarity protected, open collectorfa |
|
|
|
|
暂不可售: 单光束微型光电传感器,非常适合安装在框架或轮廓内, 集成电路, 适用于 13 mm 孔的插入式外壳, 打开角度小,适合成对安装, 亮通型, 结构类型 (S2): 圆柱型,扁平, 测试输入, 光源: 红外发光二极管, 光源类型: 调制红外光 , 880 nm, 工作电压: 10 ... 30 V DC, 测试输入: 在 0 V 时停用发射器, 开关类型: 亮时接通, 信号输出: 1 路 NPN 输出,短路保护,反极性保护,集电极开路, CCC 认证: 额定电压 ≤ 36 V 时,产品不需要 CCC 认证/标记, 环境温度: -40 ... 60 °C (-40 ... 140 °F) ,固定 -20 ... 60 °C (-4 ... 140 °F) ,可移动, 防护等级: IP67, 连接: 0.15 m 电缆 带 3 针 JST 连接器 接收器: 灰色 ; 发射器: 黑色, 外壳: PC ,黑色fa |
|
|
|
|
暂不可售: 单光束微型光电传感器,非常适合安装在框架或轮廓内, 集成电路, 适用于 13 mm 孔的插入式外壳, 打开角度小,适合成对安装, 亮通型, 结构类型 (S2): 圆柱型,扁平, 测试输入, 光源: 红外发光二极管, 光源类型: 调制红外光 , 880 nm, 工作电压: 10 ... 30 V DC, 测试输入: 在 0 V 时停用发射器, 开关类型: 亮时接通, 信号输出: 1 路 PNP 输出,短路保护,反极性保护,集电极开路, CCC 认证: 额定电压 ≤ 36 V 时,产品不需要 CCC 认证/标记, 环境温度: -40 ... 60 °C (-40 ... 140 °F) ,固定 -20 ... 60 °C (-4 ... 140 °F) ,可移动, 防护等级: IP67, 连接: 0.15 m 电缆 带 3 针 JST 连接器 接收器: 灰色 ; 发射器: 黑色, 外壳: PC ,黑色fa |
|
|
|
|
暂不可售: 单光束微型光电传感器,非常适合安装在框架或轮廓内, 集成电路, 适用于 13 mm 孔的插入式外壳, 打开角度小,适合成对安装, 暗通型, 结构类型 (S2): 圆柱型,扁平, 测试输入, 光源: 红外发光二极管, 光源类型: 调制红外光 , 880 nm, 工作电压: 10 ... 30 V DC, 测试输入: 在 0 V 时停用发射器, 开关类型: 暗时接通, 信号输出: 1 路 NPN 输出,短路保护,反极性保护,集电极开路, CCC 认证: 额定电压 ≤ 36 V 时,产品不需要 CCC 认证/标记, 环境温度: -40 ... 60 °C (-40 ... 140 °F) ,固定 -20 ... 60 °C (-4 ... 140 °F) ,可移动, 防护等级: IP67, 连接: 0.15 m 电缆 带 3 针 JST 连接器 接收器: 灰色 ; 发射器: 黑色, 外壳: PC ,黑色fa |
|
|
|
|
暂不可售: 单光束微型光电传感器,非常适合安装在框架或轮廓内, 集成电路, 适用于 13 mm 孔的插入式外壳, 打开角度小,适合成对安装, 亮通型, 结构类型 (S2): 圆柱型,扁平, 测试输入, 光源: 红外发光二极管, 光源类型: 调制红外光 , 880 nm, 工作电压: 10 ... 30 V DC, 测试输入: 在 0 V 时停用发射器, 开关类型: 暗时接通, 信号输出: 1 路 PNP 输出,短路保护,反极性保护,集电极开路, CCC 认证: 额定电压 ≤ 36 V 时,产品不需要 CCC 认证/标记, 环境温度: -40 ... 60 °C (-40 ... 140 °F) ,固定 -20 ... 60 °C (-4 ... 140 °F) ,可移动, 防护等级: IP67, 连接: 0.15 m 电缆 带 3 针 JST 连接器 接收器: 灰色 ; 发射器: 黑色, 外壳: PC ,黑色fa |
|
| 1-8/8每页显示: | |