Serviceline Industrial Sensors
Serviceline Explosion Protection

电感式传感器 NJ2-N-H42

NJ2-N-H42
  • 舒适系列
  • 2 mm 齐平
  • 耐压力高达 350 bar,感应面上为动态压力


NAMUR sensors must be operated with approved switch amplifiers. Please find suitable devices below:

请注意:所有以Pepperl + Fuchs GmbH或Pepperl + Fuchs AG名义发行的产品相关文件,例如证书,合格声明等,同样适用于Pepperl + Fuchs SE。

下载PDF版完整参数表:


技术参数节选  NJ2-N-H42

通用规格
开关功能常闭 (NC)
输出类型NAMUR
额定工作距离1,5 mm
安装齐平
确保操作距离0 ... 1,22 mm
衰减系数 rAl 0
衰减系数 rCu 0
衰减系数 r304 0,55
输出类型2 线
额定值
额定电压8 V
开关频率0 ... 400 Hz
迟滞类型 5 %
电流消耗
未检测到测量板min. 3 mA
检测到测量板≤ 1 mA
遵守标准和指令
符合标准
NAMUREN 60947-5-6:2000
IEC 60947-5-6:1999
标准EN 60947-5-2:2007
EN 60947-5-2/A1:2012
IEC 60947-5-2:2007
IEC 60947-5-2 AMD 1:2012
认证和证书
UL 认证cULus 认证,一般用途
CSA 认证通过 cCSAus 认证,一般用途
CCC 认证额定电压 ≤ 36 V 时,产品不需要 CCC 认证/标记
环境条件
环境温度-25 ... 100 °C (-13 ... 212 °F)
机械规格
连接类型连接器,ZH 630 603 00
插座,ZH 632 603 00
外壳材料不锈钢 1.4305 / AISI 303
感应面陶瓷
防护等级IP50
质量167 g
尺寸
长度50 mm
直径18 mm

Classifications

SystemClasscode
ECLASS 11.027270101
ECLASS 10.0.127270101
ECLASS 9.027270101
ECLASS 8.027270101
ECLASS 5.127270101
ETIM 7.0EC002714
ETIM 6.0EC002714
ETIM 5.0EC002714
UNSPSC 12.139121550
Product category / 产品类的电感式接近开关

Details: NJ2-N-H42

认证: NJ2-N-H42

选择语言:
认证证书号码语言文件类型文件大小
Canada USA UL Ordinary LocationUL-US-L87056-11-41301991-3 / UL-CA-L87056-31-41301991-3ALLPDF1806 KB
China Information on CCCCCC-Exempt Declaration (Pepperl+Fuchs)ALLPDF457 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)DOC-3687AALLPDF1230 KB
UK Declaration of Conformity (P+F)TDOC-6202_ENGENGPDF1284 KB

Our amplify article gives interesting insights about the development of the new, modern portfolio of inductive proximity sensors from Pepperl+Fuchs. Get the whole story here! 

 

 

Knowledge Base for Inductive Sensors

The knowledge base for inductive sensors contains extensive expertise and supports you in the highly precise and smooth operation of the sensors in your machinery and plants.

VariKont with Active Shielding Technology

采用主动屏蔽技术的 VariKont 电感式传感器,无论安装条件和周围材料如何,都可确保较大的开关距离,从而简化设备设计,经济高效!

Inductive Safety Sensors SIL 2 PL d

符合 SIL 2/PL d 标准的电感式安全传感器进行检测时没有盲区,因此数据传输可以在传感器与目标之间没有最小距离的情况下进行。了解更多针对严苛环境的优化产品组合。