General specifications |
Signal type | Analog input |
Supply |
Connection | terminals 14+, 15- or Power Rail |
Rated voltage | 20 ... 30 V DC |
Rated current | ≤ 80 mA DC |
Power consumption | ≤ 1.6 W |
Input |
Connection side | field side |
Connection | terminals 1+, 3- : mV, V ; terminals 2+, 3- : mA |
Input resistance | voltage: 1 MΩ , current: max. 100 Ω |
Limit | 30 V |
Current | 0 ... 20 mA |
Voltage | 0 ... 10 V / 0 ... 60 mV |
Resolution | 15 Bit |
Output |
Connection side | control side |
Connection | output I: terminals 10, 11, 12 output II: terminals 7-, 8+, 9- |
Output I | signal, relay |
| Contact loading | 250 V AC/2 A/cos φ 0.7; 40 V DC/2 A |
| Mechanical life | 2 x 107 switching cycles |
| Energized/De-energized delay | approx. 10 ms / approx. 10 ms |
Output II | analog |
| Load | current: max. 550 Ω , voltage: min. 1 kΩ |
| Analog voltage output | 0/1 ... 5 V , 0/2 ... 10 V |
| Analog current output | 0/4 ... 20 mA |
Transfer characteristics |
Deviation | 0.1 % of full-scale value |
| Resolution/accuracy | current: 1 µA/20 µA voltage: 0.5 mV/10 mV mV: 3 µV/60 µV |
| Influence of ambient temperature | 0.003 %/K (30 ppm) |
Reaction time | ≥ 150 ms/≤ 300 ms |
Galvanic isolation |
Input/Output | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff |
Input/power supply | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff |
Output/power supply | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff |
Indicators/settings |
Display elements | display |
Control elements | Control panel |
Configuration | via operating buttons |
Labeling | space for labeling at the front |
Directive conformity |
Electromagnetic compatibility | |
| Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) |
Low voltage | |
| Directive 2014/35/EU | EN 61010-1:2010 |
Conformity |
Electromagnetic compatibility | NE 21 |
Degree of protection | IEC 60529 |
Ambient conditions |
Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) |
Mechanical specifications |
Degree of protection | IP20 |
Connection | screw terminals |
Mass | 150 g |
Dimensions | 20 x 119 x 115 mm (0.8 x 4.7 x 4.5 inch) (W x H x D) , housing type B2 |
| Height | 119 mm |
| Width | 20 mm |
| Depth | 115 mm |
Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
General information |
Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |