General specifications |
Type | DC version, positive polarity |
Electrical specifications |
Nominal resistance | terminals 1, 8: 240 Ω; terminals 4, 5: 50 Ω |
Series resistance | terminals 1, 8: max. 250 Ω; terminals 4, 5: max. 64 Ω |
Fuse rating | 80 mA |
Hazardous area connection |
Connection | terminals 1, 2; 3, 4 |
Measuring resistor | terminals 2, 3 to 4: internal resistor 250 Ω for 5 V signal on terminals 6, 7 to 5 |
Safe area connection |
Connection | terminals 5, 6; 7, 8 |
Rated voltage | terminals 7, 8: 28 V; terminals 5, 6: 10 V |
Supply voltage | terminals 7, 8: max. 28 V; terminals 5, 6: max. 9.1 V |
Working voltage | terminals 7, 8: 26.5 V at 10 µA; terminals 5, 6: 6.5 V at 10 µA |
Conformity |
Degree of protection | IEC 60529 |
Ambient conditions |
Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) |
Storage temperature | -25 ... 70 °C (-13 ... 158 °F) |
Relative humidity | max. 75 % , without condensation |
Mechanical specifications |
Degree of protection | IP20 |
Connection | self-opening connection terminals, max. core cross section 2 x 2.5 mm2 |
Mass | approx. 150 g |
Dimensions | 12.5 x 115 x 110 mm (0.5 x 4.5 x 4.3 inch) |
| Height | 115 mm |
| Width | 12.5 mm |
| Length | 110 mm |
Construction type | modular terminal housing , see system description |
Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
Data for application in connection with hazardous areas |
EU-type examination certificate | BAS 01 ATEX 7005 , for additional certificates see www.pepperl-fuchs.com |
| Marking | II (1)GD [EEx ia] IIC (-20 °C ≤ Tamb ≤ 60 °C) |
| Voltage | terminals 1, 2: 28 V; terminals 3, 4: 9.56 V |
| Current | terminals 1, 2: 119 mA; terminals 3, 4: 195 mA |
| Power | terminals 1, 2: 830 mW; terminals 3, 4: 470 mW |
Supply | |
| Maximum safe voltage | 250 V |
Series resistance | terminals 1, 2: min. 235 Ω; terminals 3, 4: min. 49 Ω |
Certificate | TÜV 99 ATEX 1484 X , observe statement of conformity |
| Marking | II 3G EEx nA II T4 X |
Directive conformity | |
| Directive 94/9/EC | EN 50014, EN 50020, EN 50021 |
General information |
Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. |