Protection Module for Surge Protection Barrier M-LB-4212.M

Protection module for 2 signal lines
Nominal voltage 5 V
Protection module for non-grounded signal lines
Max. surge current (8/20 µs) 20 kA
Uninterruptable operation (auto reset)
Status indication
Mounting on base module, pluggable
Up to SIL 3 acc. to IEC/EN 61508

Technical Data
Documents
CAD+CAE
Approvals+Certificates
配套产品
咨询专家

请注意：所有以Pepperl + Fuchs GmbH或Pepperl + Fuchs AG名义发行的产品相关文件，例如证书，合格声明等，同样适用于Pepperl + Fuchs SE。

技术参数节选 M-LB-4212.M

General specifications
Number of protected signal lines		2
Topology		non-grounded
Functional safety related parameters
Safety Integrity Level (SIL)		SIL 3
Electrical specifications
Connection		via base module
Leakage current		< 10 µA bei U_c , line-line < 10 nA bei U_c , line-earth
Nominal voltage		5 V
Maximum continuous operating voltage		6 V AC and 8.5 V DC
Nominal load current		0.75 A at 70 °C (158 °F)
Series resistance		1 Ω per line
Impulse discharge current (10/350 µs)		1.5 kA per line
Nominal discharge current (8/20 µs)		5 kA per line
Max. surge current (8/20 µs)		20 kA
Total discharge current (8/20 µs)		10 kA
Voltage protection level		max. 42 V line-line for nominal discharge current I_n max. 600 V line-earth for nominal discharge current I_n
Impulse reset time		< 30 ms
Cut-off frequency		100 MHz , line-line
Indicators/settings
Display elements		status display operating state (green) fault indication (red)
Conformity
Degree of protection		IEC 60529:2013
Functional safety		IEC/EN 61508:2010
Surge protective devices for low voltage		EN 61643-21:2001+A1:2009+A2:2013 IEC 61643-21:2001+A1:2008+A2:2012
Ambient conditions
Ambient temperature		-40 ... 80 °C (-40 ... 176 °F)
Storage temperature		-40 ... 80 °C (-40 ... 176 °F)
Relative humidity		max. 95 % , without condensation
Corrosion resistance		acc. to ISA-S71.04, severity level G3
Mechanical specifications
Degree of protection		IP20
Connection		via base module
Material
	Housing	Polyamide PA 6.6
Mass		approx. 14 g
Dimensions		6 x 45 x 54 mm (0.24 x 1.77 x 2.15 inch) (W x H x D)
	Height	45 mm
	Width	6 mm
	Depth	54 mm
Mounting		pluggable in base module for mounting on 35 mm DIN mounting rail
Data for application in connection with hazardous areas
Certificate		TÜV 22 ATEX 8881 X
	Marking	II 3G Ex ec IIC T4 Gc
	Temperature class	T4 for ambient temperature ≤ 80 °C
Directive conformity
	Directive 2014/34/EU	EN 60079-0:2018 , EN IEC 60079-7:2015+A1:2018
International approvals
UL approval		E501704
IECEx approval
	IECEx certificate	IECEx TUR 22.0051X
	IECEx marking	Ex ec IIC T4 Gc
General information
Supplementary information		Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

Classifications

System	Classcode
ECLASS 13.0	27171202
ECLASS 12.0	27171202
ECLASS 11.0	27130805
ECLASS 10.0.1	27130805
ECLASS 9.0	27130805
ECLASS 8.0	27130805
ECLASS 5.1	27130801
ETIM 9.0	EC000941
ETIM 8.0	EC000941
ETIM 7.0	EC000941
ETIM 6.0	EC000941
ETIM 5.0	EC000941
UNSPSC 12.1	39121610
Product category / 产品类的

Details: M-LB-4212.M

Datasheet: M-LB-4212.M

Datasheet	文件类型	文件大小
Datasheet M-LB-4212.M	PDF	649 KB
Fiche de données M-LB-4212.M	PDF	650 KB
Datenblatt M-LB-4212.M	PDF	650 KB
Datasheet M-LB-4212.M	PDF	653 KB
Hoja de datos M-LB-4212.M	PDF	649 KB

Documents: M-LB-4212.M

Instruction leaflets	文件类型	文件大小
Instruction leaflet / Beipackzettel	PDF	5479 KB
Documents
Functional Safety Manual	PDF	1990 KB
Handbuch funktionale Sicherheit	PDF	2004 KB

CAD+CAE: M-LB-4212.M

CAD	文件类型	文件大小
CAD 3-D / CAD 3-D	STP	1283 KB
EPLAN
CAE EPLAN macro EDZ / CAE EPLAN Makro EDZ	EDZ	698 KB

Approvals+Certificates: M-LB-4212.M

Certificates	文件类型	文件大小
China CNEX CCC Ex Certificate	PDF	931 KB
EU ATEX Category 3 G	PDF	187 KB
TUV Rheinland	LINK	---
USA UL	PDF	533 KB
Declaration of Conformity
EU Declaration of Conformity (P+F)	PDF	190 KB
EU Declaration of Conformity (P+F)	PDF	187 KB
EU Declaration of Conformity (P+F)	PDF	184 KB
EU Declaration of Conformity (P+F)	PDF	186 KB
EU Declaration of Conformity (P+F)	PDF	183 KB
EU Declaration of Conformity (P+F)	PDF	183 KB
EU Declaration of Conformity (P+F)	PDF	184 KB
EU-Konformitäterklärung (P+F)	PDF	186 KB
EU Declaration of Conformity (P+F)	PDF	190 KB
EU Declaration of Conformity (P+F)	PDF	183 KB
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	PDF	184 KB
EU Declaration of Conformity (P+F)	PDF	187 KB
EU Declaration of Conformity (P+F)	PDF	183 KB
EU Declaration of Conformity (P+F)	PDF	185 KB
EU Declaration of Conformity (P+F)	PDF	186 KB
EU Declaration of Conformity (P+F)	PDF	187 KB
EU Declaration of Conformity (P+F)	PDF	185 KB
EU Declaration of Conformity (P+F)	PDF	185 KB
EU Declaration of Conformity (P+F)	PDF	186 KB
EU Declaration of Conformity (P+F)	PDF	184 KB
EU Declaration of Conformity (P+F)	PDF	184 KB
EU Declaration of Conformity (P+F)	PDF	184 KB
EU Declaration of Conformity (P+F)	PDF	186 KB

配套产品: M-LB-4212.M

Accessory of

	M-LB-4212 Surge Protection Barrier
	Surge protection for 2 signal lines, Nominal voltage 5 V, Surge protection barrier for non-grounded signal lines, Max. surge current (8/20 µs) 20 kA, Uninterruptable operation (auto reset), Status indication, Modular design, pluggable, Up to SIL 3 acc. to IEC/EN 61508, Modularity: two-piece, Number of protected signal lines: 2, Topology: non-grounded, Safety Integrity Level (SIL): SIL 3, Nominal discharge current (8/20 µs): 5 kA per linepa

General Notes Relating to Pepperl+Fuchs Product Information

快速链接

安全产品选型

通过各种选项进行选择，如安全完整性水平SIL，性能等级，功能及信号类型，并找到您正在寻找的经过 SIL/PL 评估的设备。

访问功能安全模块

提供数百种产品以及产品的 SIL/PL 评定、免费工具和手册：“功能安全模块”是您实施安全功能的起点。

倍加福（北京）过程自动化控制设备有限公司
北京市经济技术开发区
科创十四街99号7号楼3101室
101111 Beijing
中国
pa-info@cn.pepperl-fuchs.com
phone +86 10 5901 7000

上海倍加福工业自动化贸易有限公司
上海市静安区市北工业园区江场三路
219号4楼
200436 上海
中国
fa-info@cn.pepperl-fuchs.com
phone +86 21 6630 3939

德国倍加福公司（P+F）是全球自动化行业中久负盛名的专业传感器公司。倍加福作为全球自动化领域的电子传感与零部件的生产主导者，凭借不断的创新，恒久的质量保证，稳健的发展，保证了迄今六十余年的辉煌成就。倍加福在全球范围内拥有6300名员工，位于德国，美国，新加坡，匈牙利，印度尼西亚和越南的生产基地几乎全部通过了ISO9001的质量认证。