| General specifications |
| Design / Mounting | Cabinet installation |
| Fieldbus connection |
| Fieldbus type | PROFIBUS PA |
| FDE (Fault Disconnect Equipment) | 6.7 mA |
| Polarity | not polarity sensitive |
| Rated voltage | 9 ... 32 V |
| Rated current | max. 23 mA |
| Indicators/operating means |
| LED PWR | green: on, bus voltage existent |
| LED COM ERR | red, continuous lightning: hardware error; red, flashing: no bus activities or bus fault; off: no error |
| LED CHANNEL ERROR | red, flashing: lead breakage/short circuit; off: no error |
| DIP switch | Address setting , write protection , simulation |
| Analog input |
| Number of inputs | 1 |
| Input type | Frequency input / Counter Input , channel 1 |
| Accuracy | 0.5 % of the measured value |
| Switching frequency | min. 0.1 Hz max. 5 kHz |
| Pulse duration | min. 80 µs |
| Supply voltage | 5 V |
| Supply current | 5 mA |
| Line fault detection | lead breakage , short circuit (not in counter mode) |
| Digital input |
| Number of inputs | 12 |
| Input type | Sensor input , channels 1, 4, 7, 10 multiplexed , cycle adjustable |
| Supply voltage | 6.6 V |
| Supply current | 5 mA |
| Line fault detection | lead breakage , short circuit |
| Input type | Sensor input , channels 2, 3, 5, 6, 8, 9, 11, 12 multiplexed , cycle fixed |
| Supply voltage | 5 V |
| Supply current | 5 mA |
| Time delay before availability | 2 ms |
| Line fault detection | lead breakage , short circuit |
| Digital output |
| Number of outputs | 4 |
| Output type | Low power valve , channels 1, 4, 7, 10 |
| Supply voltage | 6.6 V |
| Supply current | 1.5 mA |
| Line fault detection | lead breakage , short circuit |
| Galvanic isolation |
| Foundation Fieldbus/Field circuit | safe galvanic isolation acc. to EN 60079-11, voltage peak value 375 V |
| Directive conformity |
| Electromagnetic compatibility | |
| Directive 2014/30/EU | EN 61326-1:2013 |
| Low voltage | |
| Directive 2014/35/EU | EN 61010-1:2010 |
| Standard conformity |
| Galvanic isolation | EN 60079-11 |
| Electromagnetic compatibility | NE 21:2011 |
| Degree of protection | IEC/EN 60529 |
| Fieldbus standard | IEC 61158-2 |
| Shock resistance | EN 60068-2-27 |
| Vibration resistance | EN 60068-2-6 |
| Ambient conditions |
| Ambient temperature | -50 ... 75 °C (-58 ... 167 °F) hazardous area
-50 ... 85 °C (-58 ... 185 °F) safe area |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
| Relative humidity | ≤ 95 % non-condensing |
| Shock resistance | 15 g , 11 ms |
| Vibration resistance | 5 g , 10 ... 150 Hz |
| Pollution degree | 2 |
| Corrosion resistance | acc. to ISA-S71.04-1985, severity level G3 |
| Mechanical specifications |
| Connection type | plug-in terminals , spring terminal |
| Core cross section | |
| Bus | up to 2.5 mm2 |
| Inputs | up to 2.5 mm2 |
| Housing material | Polycarbonate |
| Degree of protection | IP20 |
| Mass | approx. 290 g |
| Mounting | mounting on DIN rail in cabinet |
| Data for application in connection with hazardous areas |
| EU-type examination certificate | BVS 16 ATEX E 075 X |
| Marking |  II 2 (1) G Ex ib [ia Ga] IIC T4 Gb , II 3 (1) G Ex ic [ia Ga] IIC T4 Gc , II 3 (1) G Ex ec [ia Ga] IIC T4 Gc , I (M1) [Ex ia Ma] I , II (1) D [Ex ia Da] IIIC |
| PROFIBUS PA | |
| Maximum safe voltage Um | 253 V |
| Voltage Ui | 24 V |
| Current Ii | 380 mA |
| Power Pi | 5.32 W |
| Field-side | |
| Voltage Uo | 9 V |
| Current Io | 43 mA |
| Power Po | 96 mW |
| Directive conformity | |
| Directive 2014/34/EU | EN 60079-0:2012 , EN 60079-11:2012 , EN 60079-7:2015 |
| International approvals |
| FM approval | pending |
| IECEx approval | IECEx BVS 16.0051X |
| Approved for | Ex ib [ia Ga] IIC T4 Gb ,
Ex ic [ia Ga] IIC T4 Gc ,
Ex ec [ia Ga] IIC T4 Gc ,
[Ex ia Da] IIIC , [Ex ia Ma] I |
| Certificates and approvals |
| Marine approval | pending |
| General information |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. |
+86 10 5901 7000