Solenoid Driver HiC2873

1-channel isolated barrier
24 V DC supply (bus or loop powered)
Output 40 mA at 12 V DC, 55 mA current limit
Contact or logic control input
Entity parameter I_o/I_sc = 110 mA
Line fault detection (LFD)
Test pulse immunity
Up to SIL 2 acc. to IEC/EN 61508 (bus powered)
Up to SIL 3 acc. to IEC/EN 61508 (loop powered)

Technical Data
Product Documentation
Design / Simulation
Approvals
配套产品
咨询专家

请注意：所有以Pepperl + Fuchs GmbH或Pepperl + Fuchs AG名义发行的产品相关文件，例如证书，合格声明等，同样适用于Pepperl + Fuchs SE。

下载PDF版完整参数表:

技术参数节选 HiC2873

General specifications
Signal type		Digital Output
Functional safety related parameters
Safety Integrity Level (SIL)		SIL 3
Supply
Connection		SL1: 1a, 1b(-); 2a, 2b(+)
Rated voltage		20.4 ... 30 V DC loop powered 20.4 ... 30 V DC bus powered via Termination Board
Input current		62 mA at 24 V, 300 Ω load
Power dissipation		1 W at 24 V, 300 Ω load
Input
Connection side		control side
Connection		SL1: 8a(+), 7a(-) loop powered SL1: 10a(+), 9a(-) bus powered
Control input		external switch (dry contact or open collector) non isolated or logic signal input fully floating
Signal level		1-signal: 15...30 V DC (current limited to 3 mA) or contact close (internal 10 kΩ pull-up) 0-signal: 0...5 V DC or contact open
Power dissipation		1 W at 24 V, 300 Ω load for loop powered
Inrush current		0.2 A , 15 ms loop powered
Output
Connection side		field side
Connection		SL2: 5a(+), 5b(-)
Internal resistor		approx. 240 Ω
Current		≤ 40 mA
Voltage		≥ 12 V
Current limit		55 mA
Open loop voltage		approx. 22.5 V
Load		nominal 0.1 ... 5 kΩ
Switching frequency		- bus powered: filter OFF: max. 150 Hz, filter ON: max. 15 Hz - loop powered: max. 10 Hz
Energized/De-energized delay		- bus powered: filter OFF: 1 ms, filter ON: 10 ms - loop powered: switch-on 50 ms, switch-off 6 ms (300 Ω load)
Line fault detection
	Short-circuit	< 25 Ω
	Open-circuit	> 100 kΩ
	Test current	< 4 mA
Fault indication output
Connection		SL1: 6b
Output type		open collector transistor (internal fault bus)
Fault current		4 mA pulsing (20 ms ON, 200 ms OFF)
Fault level		lead short-circuit detection at < 25 Ω lead breakage detection at > 100 kΩ typical
Galvanic isolation
Output/power supply, inputs, and collective error		safe electrical isolation acc. to EN 60079-11: 2007, voltage peak value 375 V
Indicators/settings
Display elements		LEDs
Control elements		DIP switch
Factory setting		bus powered, logic level control, line fault detection enabled
Configuration		via DIP switches
Labeling		space for labeling at the front
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Conformity
Electromagnetic compatibility		NE 21:2006 For further information see system description.
Degree of protection		IEC 60529:2001
Ambient conditions
Ambient temperature		-20 ... 60 °C (-4 ... 140 °F)
Mechanical specifications
Degree of protection		IP20
Mass		approx. 100 g
Dimensions		12.5 x 106 x 128 mm (0.5 x 4.2 x 5.1 inch) (W x H x D)
	Height	106 mm
	Width	12.5 mm
	Depth	128 mm
Mounting		on termination board
Coding		pin 1 and 4 trimmed For further information see system description.
Data for application in connection with hazardous areas
EU-type examination certificate		CESI 10 ATEX 046
	Marking	II (1)G [Ex ia Ga] IIC II (1)D [Ex ia Da] IIIC I (M1) [Ex ia Ma] I
	Output	Ex ia Ga, Ex ia Da, Ex ia Ma
	Voltage	25.2 V
	Current	110 mA
	Power	693 mW
Supply
	Maximum safe voltage	253 V AC (Attention! U_m is no rated voltage.)
Certificate		KIWA 15 ATEX 0036 X
	Marking	II 3G Ex ec IIC T4 Gc
Directive conformity
	Directive 2014/34/EU	EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-7:2015+A1:2018
International approvals
FM approval
	Control drawing	116-0431 (cFMus)
UL approval
	Control drawing	116-0383 (cULus)
IECEx approval
	IECEx certificate	IECEx CES 10.0017 IECEx KIWA 15.0018X
	IECEx marking	[Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I Ex ec IIC T4 Gc
General information
Supplementary information		Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

Classifications

System	Classcode
ECLASS 13.0	27210101
ECLASS 12.0	27210190
ECLASS 11.0	27210190
ECLASS 10.0.1	27210190
ECLASS 9.0	27210190
ECLASS 8.0	27210190
ECLASS 5.1	27210121
ETIM 9.0	EC001485
ETIM 8.0	EC001485
ETIM 7.0	EC001485
ETIM 6.0	EC001485
ETIM 5.0	EC001485
UNSPSC 12.1	39121008
Product category / 产品类的	隔离式安全栅

Details: HiC2873

Product Documentation: HiC2873

Product information	语言	文件类型	文件大小
Application Guideline Solenoid Drivers	ENG	PDF	734 KB
Safety and Security Documentation
Instruction manual / Betriebsanleitung	CHS	PDF	320 KB
Functional Safety Manual	ENG	PDF	1399 KB
Manuals
System Manual	ENG	PDF	5438 KB

Design / Simulation: HiC2873

CAD	语言	文件类型	文件大小
CAD 3-D / CAD 3-D	ALL	STP	2770 KB
CAD Portal / CAD Portal	ALL	LINK	---
CAE
EPLAN macros H-System devices (EMA) / EPLAN-Makros Geräte H-System (EMA)	ALL	ZIP	3536 KB

Approvals: HiC2873

Certificates	证书号码	语言	文件类型	文件大小
Brasil TUV Rheinland Brazil	TÜV 18.3033	ALL	PDF	301 KB
Canada FM	FM 17 CA 0057X	ALL	PDF	328 KB
Europe CESI ATEX Category (1) D ATEX Category (M1) ATEX Category (1) G	CESI 10 ATEX 046	ALL	PDF	907 KB
Europe KIWA ATEX Category 3 G	KIWA 15 ATEX 0036X	ALL	PDF	97 KB
KIWA Ex ec IECEx Certificate of Conformity Zone 2	IECEx KIWA 15.0018X	ALL	LINK	---
Korea KOSHA	15-AV4BO-0597	ALL	PDF	630 KB
USA Canada UL Hazardous Location Certificate of Compliance cULus UL E106378	CoC 20181016 - E106378 RepRef 20140228	ALL	PDF	260 KB
USA FM	FM 17 US 0111X	ALL	PDF	330 KB
United Arab Emirates SGS Gulf Limited ECASEx	23-12-96808/E23-12-099954/NB0002	ALL	PDF	603 KB
United Arab Emirates SGS Gulf Limited ECASEx	23-12-96809/E23-12-099955/NB0002	ALL	PDF	602 KB
Worldwide CESI IECEx Certificate of Conformity	IECEx CES 10.0017	ALL	LINK	---
exida Functional Safety Assessment	P+F 11/07-044 R034 V1R2	ALL	PDF	577 KB
Control Drawings
Control drawing UL / Control drawing UL		ALL	PDF	88 KB
Control drawing FM / Control drawing FM		ALL	PDF	89 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	DOC-0930C	ALL	PDF	49 KB

配套产品: HiC2873

Accessory of

	HiCTB16-YRS-RRB-AK-CC-DO16 Termination Board
	System board for Yokogawa ProSafe-RS, For 16-channel DO card SDV541, For 16 modules, Recommended modules: HiC2871 (DO), HiC2873 (DO), HiC2877 (DO), 24 V DC supply, Hazardous area: spring terminals, blue, Non-hazardous area: Yokogawa system connector, 50-pin, Number of modules: 16, Signal type: Digital Output, Manufacturer: Yokogawa, Control system type: ProSafe-RSpa

	HiCTB16-TRI-DOISS-EL-PL-Y1 Termination Board
	System board for Schneider Electric, Tricon series by Triconex, TAN48 approval, For 16-channel DO cards 3604E and 3624, For 16 modules, Recommended modules: HiC2873 (DO), HiC2877 (DO), 24 V DC supply, Hazardous area: pluggable screw terminals, blue, Non-hazardous area: ELCO socket, 56-pin, Number of modules: 16, Signal type: Digital Output, Manufacturer: Triconex, Control system type: Triconpa

	HiCTB32-TRI-DOISS-EL-PL-Y1 Termination Board
	System board for Schneider Electric, Tricon series by Triconex, TAN48 approval, For 32-channel (16+16) DO cards 3625 and 3664, For 32 modules, Recommended modules: HiC2873 (DO), HiC2877 (DO), 24 V DC supply, Hazardous area: pluggable screw terminals, blue, Non-hazardous area: ELCO socket, 56-pin, Number of modules: 32, Signal type: Digital Output, Manufacturer: Triconex, Control system type: Triconpa

	HiCTB16-TRX-RAC-PL-IO16 Termination Board
	System board for Schneider Electric, Tricon CX series by Triconex, TAN48 approval, For 16-channel universal I/O card 3902(A)X and AO card 3809(A)X, For 16 modules, Supported signal types: DI/DO/AI/TI/AO/UIO, 24 V DC supply, Hazardous area: pluggable screw terminals, blue, Non-hazardous area: Sub-D connector (male), 50-pin, Up to SIL 3 acc. to IEC/EN 61508, Number of modules: 16, Signal type: Analog output Universal, Manufacturer: Triconex, Control system type: Tricon CXpa

	HiCTB16-TRX-RAC-PL-DO16 Termination Board
	System board for Schneider Electric, Tricon CX series by Triconex, TAN48 approval, For 32-channel (16+16) DO card 3626X, For 16 modules, Recommended modules: HiC2871A (DO), HiC2873 (DO), HiC2883 (DO), HiC5861 (DO), HiC5863 (DO), 24 V DC supply, Hazardous area: pluggable screw terminals, blue, Non-hazardous area: ELCO socket, 56-pin, Number of modules: 16, Signal type: Digital Output, Manufacturer: Triconex, Control system type: Tricon CXpa

General Notes Relating to Pepperl+Fuchs Product Information

快速链接

安全产品选型

通过各种选项进行选择，如安全完整性水平SIL，性能等级，功能及信号类型，并找到您正在寻找的经过 SIL/PL 评估的设备。

倍加福（北京）过程自动化控制设备有限公司
北京市经济技术开发区
科创十四街99号7号楼3101室
101111 Beijing
中国
pa-info@cn.pepperl-fuchs.com
phone +86 10 5901 7000

上海倍加福工业自动化贸易有限公司
上海市静安区市北工业园区江场三路
219号4楼
200436 上海
中国
fa-info@cn.pepperl-fuchs.com
phone +86 21 6630 3939

德国倍加福公司（P+F）是全球自动化行业中久负盛名的专业传感器公司。倍加福作为全球自动化领域的电子传感与零部件的生产主导者，凭借不断的创新，恒久的质量保证，稳健的发展，保证了迄今六十余年的辉煌成就。倍加福在全球范围内拥有6300名员工，位于德国，美国，新加坡，匈牙利，印度尼西亚和越南的生产基地几乎全部通过了ISO9001的质量认证。