General specifications |
Signal type | Digital Input |
Functional safety related parameters |
Safety Integrity Level (SIL) | SIL 3 |
Performance level (PL) | PL d |
Supply |
Connection | Power Rail or terminals 22+, 23+, 24- |
Rated voltage | 20 ... 35 V DC |
Ripple | ≤ 10 % |
Rated current | ≤ 130 mA |
Power dissipation | 2.1 W |
Power consumption | max. 2.3 W |
Input |
Connection side | field side |
Connection | terminals 10+, 12- |
Open circuit voltage/short-circuit current | approx. 8.4 V DC / approx. 11.7 mA |
Lead resistance | ≤ 50 Ω, in hazardous area cable capacitances and inductivities are to be taken into account |
Switching point | |
| Relay de-energized | I < 2.1 mA and I > 5.9 mA |
| Relay energized | 2.8 mA < I < 5.3 mA |
Response delay | ≤ 1 ms |
Output |
Connection side | control side |
Connection | output I: terminals 13, 14 ; output II: terminals 15, 21 ; output III: terminals 16+, 17- |
Output I | relay , signal |
| Contact loading | 50 V AC/1 A/cos φ > 0.7; 24 V DC/1 A resistive load |
| Mechanical life | 50 x 106 switching cycles |
Output II | relay , signal |
| Contact loading | 50 V AC/1 A/cos φ > 0.7; 24 V DC/1 A resistive load |
| Mechanical life | 50 x 106 switching cycles |
Output III | electronic output, passive , fault signal |
| Rated voltage | 10 ... 30 V DC |
| Signal level | 1-signal: (L+) -2.5 V (7 mA, short-circuit proof) / 0-signal: blocked output (Leakage current ≤ 10 µA) |
Transfer characteristics |
Switching frequency | 5 Hz |
Galvanic isolation |
Output/power supply | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff |
Mutual output I, II, III | basic insulation according to IEC/EN 61010-1, rated insulation voltage 50 Veff |
Indicators/settings |
Display elements | LEDs |
Labeling | space for labeling at the front |
Directive conformity |
Electromagnetic compatibility | |
| Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) |
Machinery Directive | |
| Directive 2006/42/EC | EN/ISO 13849-1:2015 |
Conformity |
Electromagnetic compatibility | NE 21:2017 , EN 61326-3-1:2017 |
Degree of protection | IEC 60529:2001 |
Safety | IEC/EN 61508:2010 |
Ambient conditions |
Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) |
Mechanical specifications |
Degree of protection | IP20 |
Connection | screw terminals |
Mass | approx. 280 g |
Dimensions | 40 x 107 x 115 mm (1.6 x 4.2 x 4.5 inch) (W x H x D) , housing type C1 |
| Height | 107 mm |
| Width | 40 mm |
| Depth | 115 mm |
Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
Data for application in connection with hazardous areas |
EU-type examination certificate | PTB 00 ATEX 2042 |
| Marking | II (1)G [Ex ia Ga] IIC II (1)D [Ex ia Da] IIIC I (M1) [Ex ia Ma] I |
| Input | Ex ia |
| Voltage | 9.56 V |
| Current | 16.8 mA |
| Power | 41 mW (linear characteristic) |
Supply | |
| Maximum safe voltage | 40 V AC/DC (Attention! The rated voltage can be lower.) |
Output | |
| Maximum safe voltage | output I/output II: 253 V AC/DC (Attention! Um is no rated voltage.) output III: 60 V AC/DC (Attention! Um is no rated voltage.) |
Certificate | TÜV 99 ATEX 1493 X |
| Marking | II 3G Ex ec nC IIC T4 Gc |
Galvanic isolation | |
| Input/Output | safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V |
| Input/power supply | safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V |
Directive conformity | |
| Directive 2014/34/EU | EN IEC 60079-0:2018+AC:2020 , EN 60079-7:2015+A1:2018 , EN 60079-11:2012 , EN IEC 60079-15:2019 |
International approvals |
FM approval | |
| Control drawing | 116-0158 |
IECEx approval | |
| IECEx certificate | IECEx TUN 19.0013X |
| IECEx marking | Ex ec nC IIC T4 Gc |
General information |
Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |