Support Industrielle sensorer
Support Explosion Protection

Thru-beam sensor ML29-P/59/103/143

ML29-P/59/103/143
  • Single-beam monitoring with extremely narrow sensor
  • Integrated circuit
  • Test
  • Simple installation - Plug & Play
  • Ideal for installation in door profiles or frames
  • Dark on version

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Hent hele databladet som PDF:


Uddrag af datablad: Tekniske data for   ML29-P/59/103/143

Produkt beskrivelse
Single-beam miniature sensor, ideal for installing in frames or door profiles
System components
EmitterML29-T/143
ReceiverML29-R/59/103/143
General specifications
Effective detection range0 ... 6 m
Threshold detection range8.5 m
Light sourceIRED
Light typemodulated infrared light
Opening angle+/- 8 °
Optical facelateral
Ambient light limit40000 Lux
Functional safety related parameters
MTTFd880 a
Mission Time (TM)20 a
Diagnostic Coverage (DC)0 %
Indicators/operating means
Function indicatorLED red in receiver : lights up when receiving the light beam
Electrical specifications
Operating voltage11 ... 30 V DC
No-load supply currentEmitter: ≤ 25 mA
Receiver: ≤ 10 mA
Input
Test inputTest: Transmitter switches off at +UB ≤ 5 V DC
Output
Switching typedark-on
Signal output1 PNP output, short-circuit protected, reverse polarity protected, open collector
Switching voltagemax. 30 V DC
Switching currentmax. 0.1 A
Switching frequency100 Hz
Response time5 ms
Conformity
Product standardEN 60947-5-2
Compliance with standards and directives
Standard conformity
StandardsEN 61000-6-2, EN 61000-6-3
Approvals and certificates
CCC approvalCCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature-20 ... 60 °C (-4 ... 140 °F)
Storage temperature-20 ... 75 °C (-4 ... 167 °F)
Relative humidity90 % , noncondensing
Mechanical specifications
Degree of protectionIP65
Connection4-pin plastic connector, 6.5 mm diameter
Material
HousingPMMA , black
Optical facePlastic pane
Massper device 120 g
Dimensions
Height85.2 mm
Width11.6 mm
Depth9.2 mm

Classifications

SystemClasscode
ECLASS 13.027270901
ECLASS 12.027270901
ECLASS 11.027270901
ECLASS 10.0.127270901
ECLASS 9.027270901
ECLASS 8.027270901
ECLASS 5.127270901
ETIM 9.0EC002716
ETIM 8.0EC002716
ETIM 7.0EC002716
ETIM 6.0EC002716
ETIM 5.0EC002716
UNSPSC 12.139121528

Details: ML29-P/59/103/143

Informative Literature: ML29-P/59/103/143

Language Selection:
We are sorry, there are no documents for your language selection. Please select another language.

Product Documentation: ML29-P/59/103/143

Language Selection:
Brief InstructionsSprogFil typeFil størrelse
Instruction leaflet / BeipackzettelALLPDF166 KB

Design / Simulation: ML29-P/59/103/143

Language Selection:
CADSprogFil typeFil størrelse
3-D model emitter / 3-D-Modell SenderALLSTP73 KB
CAD 3-D additional / CAD 3-D additionalALLSTP73 KB
CAD Portal / CAD PortalALLLINK---

Approvals: ML29-P/59/103/143

Language Selection:
Declaration of ConformityCertifikat nr.SprogFil typeFil størrelse
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)DOC-2230DALLPDF229 KB
UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F)DOC-6934ALLPDF225 KB

Tilhørende produkter: ML29-P/59/103/143

Accessories
Female cordset with 6 m cable for ML29 series sensorsfa
Front plate for thru-beam sensors in series ML29 fa
Female cordset with 3 m cable for ML29 series sensorsfa