Serviceline
Support Industrielle sensorer
Support Explosion Protection

Ikke tilgængelig for indkøb

This product has been replaced.Go to replacement product UGB-18GM50-255-2E3
Ikke tilgængelig for indkøb

Splice sensor UGB-18GM-200-2E3

UGB-18GM-200-2E3
  • Ultrasonic system for splice detection
  • Short version
  • Insensitive to printing, colors, and shining surfaces
  • Very high processing speeds are possible.

Hent hele databladet som PDF:


Uddrag af datablad: Tekniske data for  UGB-18GM-200-2E3

General specifications
Sensing range20 ... 60 mm , optimal distance: 45 mm
Transducer frequency205 kHz
Indicators/operating means
LED greenDisplay: readiness
LED yellowDisplay: splice detected
LED redIndication: No sheet detected (Air)
Electrical specifications
Operating voltage18 ... 30 V DC , ripple 10 %SS
No-load supply current< 60 mA
Input
Input typeTeach-In input
0-level: -UB ... -UB + 1V
1-level: +UB - 1 V ... +UB
Pulse length≥ 500 ms
Impedance≥ 10 kΩ
Output
Output type2 switch outputs PNP, NC
Rated operating current2 x 100 mA , short-circuit/overload protected
Voltage drop≤ 2 V
Switch-on delay≤ 600 µs
Switch-off delay≤ 600 µs
Pulse extension≥ 120 ms programmable
Standard conformity
StandardsIEC / EN 60947-5-2:2004 C-UL listed: 57M3, IND CONT. EQ., "Powered by Class 2 Power Source"
Ambient conditions
Ambient temperature0 ... 60 °C (32 ... 140 °F)
Storage temperature-40 ... 70 °C (-40 ... 158 °F)
Mechanical specifications
Degree of protectionIP67
Connection2 m PVC cable 0.14 mm2
Material
Housingnickel plated brass; plastic components: PBT
Transducerepoxy resin/hollow glass sphere mixture; polyurethane foam
Mass150 g

Documents: UGB-18GM-200-2E3

Instruction leafletsSprogFil typeFil størrelse
Instruction leaflet / Beipackzettel ALLPDF127 KB

Tilhørende produkter: UGB-18GM-200-2E3

Accessories
Mounting bracket for double sheet monitorfa