Splice sensor UGB-18GM50-255-2E3
- Ultrasonic system for splice detection
- Short version
- Insensitive to printing, colors, and shining surfaces
- Very high processing speeds are possible.
Hent hele databladet som PDF:
Uddrag af datablad: Tekniske data for UGB-18GM50-255-2E3
| General specifications | ||
|---|---|---|
| Sensing range | 20 ... 60 mm , optimal distance: 45 mm | |
| Transducer frequency | 255 kHz | |
| Indicators/operating means | ||
| LED green | Display: readiness | |
| LED yellow | Display: splice detected | |
| LED red | Indication: No sheet detected (Air) | |
| Electrical specifications | ||
| Operating voltage | 18 ... 30 V DC , ripple 10 %SS | |
| No-load supply current | < 60 mA | |
| Input | ||
| Input type | Teach-In input 0-level: -UB ... -UB + 1V 1-level: +UB - 1 V ... +UB |
|
| Pulse length | ≥ 500 ms | |
| Impedance | ≥ 10 kΩ | |
| Output | ||
| Output type | 2 switch outputs PNP, NC | |
| Rated operating current | 2 x 100 mA , short-circuit/overload protected | |
| Voltage drop | ≤ 3 V | |
| Switch-on delay | ≤ 600 µs | |
| Switch-off delay | ≤ 600 µs | |
| Pulse extension | ≥ 120 ms programmable | |
| Approvals and certificates | ||
| UL approval | cULus Listed, General Purpose | |
| CSA approval | cCSAus Listed, General Purpose | |
| CCC approval | CCC approval / marking not required for products rated ≤36 V | |
| Ambient conditions | ||
| Ambient temperature | 0 ... 60 °C (32 ... 140 °F) | |
| Storage temperature | -40 ... 70 °C (-40 ... 158 °F) | |
| Mechanical specifications | ||
| Connection type | cable PVC , 2 m | |
| Core cross-section | 0.14 mm2 | |
| Degree of protection | IP67 | |
| Material | ||
| Housing | nickel plated brass; plastic components: PBT | |
| Transducer | epoxy resin/hollow glass sphere mixture; polyurethane foam | |
| Mass | 150 g | |
Documents: UGB-18GM50-255-2E3
| Brochures | Sprog | Fil type | Fil størrelse |
|---|---|---|---|
| Application report - Reliable Detection for an Uninterrupted Packaging Process | ENG | 155 KB | |
| Applikationsbericht - Zuverlässige Detektion für kontinuierlichen Verpackungsprozess | GER | 158 KB | |
| Instruction leaflets | |||
| Instruction leaflet / Beipackzettel | ALL | 191 KB | |
CAD+CAE: UGB-18GM50-255-2E3
| CAD | Fil type | Fil størrelse | |
|---|---|---|---|
| 3-D model in IGS format / 3-D-Modell im IGS-Format | IGS | 152 KB | |
| 3-D model in IGS format / 3-D-Modell im IGS-Format | IGS | 76 KB | |
| 3-D model in STP format / 3-D-Modell im STP-Format | STP | 38 KB | |
| 3-D model in STP format / 3-D-Modell im STP-Format | STP | 20 KB | |
| CAD Portal / CAD Portal | LINK | --- |
Approvals+Certificates: UGB-18GM50-255-2E3
| Statements of compliance | Certifikat nr. | Fil type | Fil størrelse |
|---|---|---|---|
| EU-Declaration of conformity / EU-Konformitätserklärung | DOC-2950A | 238 KB | |
| Certificates | |||
| Canada USA CSA Ordinary Location | 1007121 | 99 KB | |
| US CA UL General Purpose | E87056 | LINK | --- |
Tilhørende produkter: UGB-18GM50-255-2E3
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
Pepperl+Fuchs A/S
Kirkebjerg Allé 90
DK-2605 Brøndby
Denmark
info@dk.pepperl-fuchs.com
+45 7010 4210
© 2019 Alle rettigheder forbeholdt.
Pepperl+Fuchs er markedsledende indenfor udvikling og fabrikation af elektroniske sensorer og komponenter til det globale automatiseringsmarked. Kontinuerlig innovation, kombineret med høj kvalitet og stabil vækst har sikret uafbrudt succes gennem mere end 70 år. Pepperl+Fuchs har 6.200 ansatte på verdensplan og har produktionsfaciliteter i Tyskland, USA, Singapore, Ungarn, Indonesien og Vietnam; de fleste ISO 9001 certificerede.