HART Communication Board HiATB01-HART-4X8-Y1

4 x 8-channel
24 V DC supply
Suitable for HART communication
Dual RS 485 connections
Used with HiC Termination Boards
LED indicator for supply status

Technical Data
Product Documentation
Design / Simulation
Approvals
Tilhørende produkter

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Hent hele databladet som PDF:

Uddrag af datablad: Tekniske data for HiATB01-HART-4X8-Y1

Produkt beskrivelse
HART Communication Board

Supply
Connection		X20: terminals 1, 3(+); 2, 4(-)
Nominal voltage		24 V DC SELV/PELV
Voltage drop		0.9 V , voltage drop across the series diode on the termination board must be considered
Ripple		≤ 10 %
Fusing		0.5 A
Power dissipation		≤ 500 mW , without modules
Reverse polarity protection		yes
Interface
Type/number		2 x RS-485
Redundancy
Supply		Redundancy available. The supply is decoupled, monitored and fused.
Indicators/settings
Display elements		LED PWR1 (termination board power supply), green LED LED PWR2 (termination board power supply), green LED
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Conformity
Electromagnetic compatibility		NE 21:2012 For further information see system description.
Degree of protection		IEC 60529:2001
Ambient conditions
Ambient temperature		-20 ... 60 °C (-4 ... 140 °F)
Storage temperature		-40 ... 70 °C (-40 ... 158 °F)
Mechanical specifications
Degree of protection		IP20
Connection
	Control side	RS-485 : 1 x screw terminal , black HART : 4 x IDC plug, 34-pin
	Supply	pluggable screw terminals , black
Core cross section		screw terminals: 0.25 ... 1.5 mm² (24 ... 12 AWG)
Material		housing: polycarbonate, 10 % glass fiber reinforced
Mass		approx. 210 g
Dimensions		50 x 200 x 163 mm (1.97 x 7.9 x 6.42 inch) (W x H x D) , depth including module assembly
	Height	200 mm
	Width	50 mm
	Depth	163 mm
Mounting		on 35 mm DIN mounting rail acc. to EN 60715:2001
General information
Supplementary information		Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

Classifications

System	Classcode
ECLASS 13.0	27210190
ECLASS 12.0	27210190
ECLASS 11.0	27210190
ECLASS 10.0.1	27210190
ECLASS 9.0	27210190
ECLASS 8.0	27210190
ECLASS 5.1	27242690
ETIM 9.0	EC001485
ETIM 8.0	EC001485
ETIM 7.0	EC001485
ETIM 6.0	EC001485
ETIM 5.0	EC001485
UNSPSC 12.1	39121008

Details: HiATB01-HART-4X8-Y1

Product Documentation: HiATB01-HART-4X8-Y1

System Descriptions	Sprog	Fil type	Fil størrelse
Brief Instructions - HART Interface Solutions H-System	ENG	PDF	452 KB
Manuals
Manual DTM description HiDMux2700	ENG	PDF	2278 KB
Manual HiDMux2700	ENG	PDF	8581 KB
System Manual	ENG	PDF	5438 KB

Design / Simulation: HiATB01-HART-4X8-Y1

CAD	Sprog	Fil type	Fil størrelse
CAD 2-D / CAD 2-D	ALL	ZIP	16364 KB

Approvals: HiATB01-HART-4X8-Y1

Declaration of Conformity	Certifikat nr.	Sprog	Fil type	Fil størrelse
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	DOC-0675C	ALL	PDF	71 KB

Tilhørende produkter: HiATB01-HART-4X8-Y1

Accessory of

	HiCTB08-SCT-44C-SC-RA Termination Board
	For 8 modules, 24 V DC supply, Supported signal types: DI/DO/AI/TI/AO/UIO, Hazardous area: screw terminals, blue, Non-hazardous area: screw terminals, black, Number of modules: 8, Number of channels per module: 1 , 2, Signal type: Universal, Manufacturer: Generic, Control system type: Universalpa

	HiCTB16-SCT-44C-SC-RA Termination Board
	For 16 modules, 24 V DC supply, Supported signal types: DI/DO/AI/TI/AO/UIO, Hazardous area: screw terminals, blue, Non-hazardous area: screw terminals, black, Number of modules: 16, Number of channels per module: 1 , 2, Signal type: Universal, Manufacturer: Generic, Control system type: Universalpa

	HiCTB08-SDC-44C-SC-RA Termination Board
	For 8 modules, 24 V DC supply, Supported signal types: DI/DO/AI/TI/AO/UIO, Hazardous area: screw terminals, blue, Non-hazardous area: Sub-D connector (male), 37-pin, Number of modules: 8, Number of channels per module: 1 , 2, Signal type: Universal, Manufacturer: Generic, Control system type: Universalpa

	HiCTB08-SPT-44C-SP-RS-Y1 Termination Board
	For 8 modules, 24 V DC supply, Supported signal types: DI/DO/AI/TI/AO/UIO, Hazardous area: spring terminals, blue, Non-hazardous area: spring terminals, black, Number of modules: 8, Number of channels per module: 1 , 2, Signal type: Universal, Manufacturer: Generic, Control system type: Universalpa

	HiCTB16-SDC-44C-SC-RA Termination Board
	For 16 modules, 24 V DC supply, Supported signal types: DI/DO/AI/TI/AO/UIO, Hazardous area: screw terminals, blue, Non-hazardous area: Sub-D connector (male), 37-pin, Number of modules: 16, Number of channels per module: 1 , 2, Signal type: Universal, Manufacturer: Generic, Control system type: Universalpa

	HiCTB08-FBM-RSC-SP-IO08-Y1 Termination Board
	System board for Schneider, Foxboro FBM series, For 8 modules, For 8-channel cards FBM201/214(b)/216(b) (AI), FBM215/218/237 (AO), FBM204/205 (AO/AI), FBM244 (AI/AO), FBM247/248 (UIO), 24 V DC supply, Recommended modules: HiC2025(A) (AI), HiC2031 (AO), HiC2081 (TI), HiC2831R5 (DI), HiC2883 (DO), HiC2441 (UIO), Hazardous area: spring terminals, blue, Non-hazardous area: Sub-D connector (male), 25-pin, Number of modules: 8, Signal type: Universal, Manufacturer: Foxboro, Control system type: FBMpa

Matching System Components

	HiDMux2700 HART Multiplexer Master
	32-channel, 24 V DC supply, HART field device input (revision 5 to 7), RS-485 interface, Up to SIL 3 acc. to IEC/EN 61508pa

	PACTware 5.0 FDT Framework
	Universal DTM host platform, For all DTMs of Pepperl+Fuchs, Approved FDT/DTM technology, Free of charge, Download from Pepperl+Fuchs websitepa

	DTM Generic HART Universal DTM
	Device DTM, For HART multiplexers, Communication DTMpa

	DTM HART Comm Commmunication drivers
	Communication DTM, Frame application, like e. g. PACTware, must be installed separatelypa

Accessories

	HiACA-UNI-FLK34-FLK34-0M5 HART Connection Cable
	H-System accessory, Connection cable between HART Communication Board and Termination Board, 34-pin cablepa

	HIACA-UNI-FLK34-FLK34-1M0 HART Connection Cable
	H-System accessory, Connection cable between HART Communication Board and Termination Board, 34-pin cablepa

	HiACA-UNI-FLK34-FLK34-2M0 HART Connection Cable
	H-System accessory, Connection cable between HART Communication Board and Termination Board, 34-pin cablepa

	HiACA-UNI-FLK34-FLK34-3M0 HART Connection Cable
	H-System accessory, Connection cable between HART Communication Board and Termination Board, 34-pin cablepa

	HiACA-UNI-FLK34-FLK34-6M0 HART Connection Cable
	H-System accessory, Connection cable between HART Communication Board and Termination Board, 34-pin cablepa

Generelle bemærkninger vedr. produktoplysninger fra Pepperl+Fuchs

Hurtige links

Pepperl+Fuchs A/S
Kirkebjerg Allé 90
DK-2605 Brøndby
Denmark
info@dk.pepperl-fuchs.com
phone +45 7010 4210

Pepperl+Fuchs er markedsledende indenfor udvikling og fabrikation af elektroniske sensorer og komponenter til det globale automatiseringsmarked. Kontinuerlig innovation, kombineret med høj kvalitet og stabil vækst har sikret uafbrudt succes gennem mere end 70 år. Pepperl+Fuchs har 6.300 ansatte på verdensplan og har produktionsfaciliteter i Tyskland, USA, Singapore, Ungarn, Indonesien og Vietnam; de fleste ISO 9001 certificerede.