Support Industrielle sensorer
Support Explosion Protection

Female cordset ML29 Kupplungsdose 6m 4polig

ML29 Kupplungsdose 6m 4polig
  • Special snap-in connector for ML29 series

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Hent hele databladet som PDF:


Uddrag af datablad: Tekniske data for   ML29 Kupplungsdose 6m 4polig

Produkt beskrivelse
Female cordset with 6 m cable for ML29 series sensors
General specifications
Number of pins4
Connection 1socket
Construction type 1straight
Threading 1M8
Connection 2cable end
Electrical specifications
Operating voltagemax. ... 30 V
Operating currentmax. 4 A
Ambient conditions
Ambient temperature-30 ... 90 °C (-22 ... 194 °F)
Pollution degree3
Mechanical specifications
Degree of protectionIP67 according to EN 60529 (when properly seated)
Material
BodyTPU, blue
CablePVC
Cable
Sheath diameter∅ 3.5 mm
Colorgrey
Cores4 x 0.14 mm2
Length6 m

Classifications

SystemClasscode
ECLASS 13.027060311
ECLASS 12.027060311
ECLASS 11.027060311
ECLASS 10.0.127060311
ECLASS 9.027060311
ECLASS 8.027279218
ECLASS 5.127279201
ETIM 9.0EC001855
ETIM 8.0EC001855
ETIM 7.0EC001855
ETIM 6.0EC001855
ETIM 5.0EC002585
UNSPSC 12.131251501

Details: ML29 Kupplungsdose 6m 4polig

Informative Literature: ML29 Kupplungsdose 6m 4polig

Language Selection:
We are sorry, there are no documents for your language selection. Please select another language.

Tilhørende produkter: ML29 Kupplungsdose 6m 4polig

Accessory of

Single-beam monitoring with extremely narrow sensor, Integrated circuit, Test, Simple installation - Plug & Play, Ideal for installation in door profiles or frames, Construction type(S2): Rectangular type, Test input, Light source: IRED, Light type: modulated infrared light, Operating voltage: 11 ... 30 V DC, Test input: Test: emitter deactivation at 0 V, Switching type: light-on, Signal output: 1 PNP output, short-circuit protected, reverse polarity protected, open collectorfa
Single-beam monitoring with extremely narrow sensor, Integrated circuit, Test, Simple installation - Plug & Play, Ideal for installation in door profiles or frames, Construction type(S2): Rectangular type, Test input, Light source: IRED, Light type: modulated infrared light, Operating voltage: 11 ... 30 V DC, Test input: Test: Transmitter switches off at +UB ≤ 5 V DC, Switching type: light-on, Signal output: 1 NPN output, short-circuit protected, reverse polarity protected, open collectorfa
Single-beam monitoring with extremely narrow sensor, Integrated circuit, Test, Simple installation - Plug & Play, Ideal for installation in door profiles or frames, Construction type(S2): Rectangular type, Test input, Light source: IRED, Light type: modulated infrared light, Operating voltage: 11 ... 30 V DC, Test input: Test: Transmitter switches off at +UB ≤ 5 V DC, Switching type: dark-on, Signal output: 1 NPN output, short-circuit protected, reverse polarity protected, open collectorfa
Single-beam monitoring with extremely narrow sensor, Integrated circuit, Test, Simple installation - Plug & Play, Ideal for installation in door profiles or frames, Construction type(S2): Rectangular type, Test input, Light source: IRED, Light type: modulated infrared light, Operating voltage: 11 ... 30 V DC, Test input: Test: Transmitter switches off at +UB ≤ 5 V DC, Switching type: dark-on, Signal output: 1 PNP output, short-circuit protected, reverse polarity protected, open collectorfa
Single-beam monitoring with extremely narrow sensor, Integrated circuit, Test, Simple installation - Plug & Play, Ideal for installation in door profiles or frames, Construction type(S2): Rectangular type, Test input, Light source: IRED, Light type: modulated infrared light, Operating voltage: 11 ... 30 V DC, Test input: Test: Transmitter switches off at +UB ≤ 5 V DC, Switching type: light-on, Signal output: 1 PNP output, short-circuit protected, reverse polarity protected, open collectorfa