Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Download the complete datasheet as a PDF:
Product Description |
---|
Laser light sensor for profile matching; Resolution: 752 x 480 Pixel; Measuring range: X = 40 ... 160 mm, Z = 60 ... 350 mm; Scan rate: 10 s-1; 2 digital outputs, RS-485 interface |
General specifications | ||
---|---|---|
Measuring range | X = 40 ... 160 mm ; Z = 60 ... 350 mm | |
Light source | laser diode | |
Light type | red laser + Integrated LED lightning red 650 nm | |
Laser nominal ratings | ||
Note | VISIBLE LASER RADIATION , DO NOT STARE INTO BEAM DO NOT VIEW DIRECTLY WITH OPTICAL INSTRUMENTS |
|
Laser class | 1 | |
Wave length | Measuring laser: 660 nm | |
Pulse length | Measuring laser: 0.5 ms | |
Maximum optical power output | Measuring laser: 15 mW | |
Laser monitoring | The safety system switches off the laser when the laser current is too high | |
Scan rate | 10 s-1 | |
Resolution | X>0.44 mm; Z>0.4 mm at 60 mm distanc X>1.1 mm; Z>1.1 mm at 200 mm distanc X>1.9 mm; Z>2.5 mm at 350 mm distanc |
|
Functional safety related parameters | ||
MTTFd | 20 a | |
Mission Time (TM) | 10 a | |
Diagnostic Coverage (DC) | 0 % | |
Indicators/operating means | ||
Operation indicator | LED green | |
Diagnostics indicator | LED yellow / red | |
Function indicator | Trigger: LED yellow ; object detected : LED red / green | |
Control elements | 2 push-buttons | |
Electrical specifications | ||
Operating voltage | 24 V ± 20 % , PELV | |
No-load supply current | max. 250 mA | |
Power consumption | max. 6 W , Outputs without load | |
Interface | ||
Interface type | RS 485 interface | |
Physical | Switchable terminal resistor | |
Protocol | binary code | |
Transfer rate | 38400 ... 230400 Bit/s | |
Input | ||
Input voltage | 24 V | |
Number/Type | External triggering + 1 Input | |
Switching threshold | low: < 2.5 V, high: > 8 V | |
Output | ||
Number/Type | 2 digital outputs | |
Switching type | PNP | |
Switching voltage | 24 V | |
Switching current | 150 mA each output | |
Compliance with standards and directives | ||
Standard conformity | ||
Noise immunity | EN 61000-6-2:2005 | |
Emitted interference | EN 61000-6-4:2007/A1:2011 | |
Degree of protection | EN 60529 | |
Shock and impact resistance | EN 60068-2-27:2009 | |
Laser class | IEC 60825-1:2007 | |
Approvals and certificates | ||
UL approval | cULus Listed, Type 1 enclosure | |
CCC approval | CCC approval / marking not required for products rated ≤36 V | |
Approvals | CE | |
Ambient conditions | ||
Operating temperature | -20 ... 45 °C (-4 ... 113 °F) , (noncondensing; prevent icing on the lens!) | |
Storage temperature | -20 ... 70 °C (-4 ... 158 °F) | |
Mechanical specifications | ||
Degree of protection | IP67 | |
Connection | 8-pin, M12 x 1 connector ( supply + RS485 + Inputs/Outputs ) ; can be rotated 90° ; Grounding : Grounding clip for PCV system | |
Material | ||
Housing | PC/ABS | |
Optical face | Plastic pane | |
Mass | approx. 125 g | |
Tightening torque, fastening screws | max. 2 Nm | |
Dimensions | ||
Height | 85 mm | |
Width | 38 mm | |
Depth | 55 mm | |
General information | ||
Note | Security Instructions: |
System | Classcode |
---|---|
ECLASS 13.0 | 27270916 |
ECLASS 12.0 | 27270916 |
ECLASS 11.0 | 27270801 |
ECLASS 10.0.1 | 27270801 |
ECLASS 9.0 | 27270801 |
ECLASS 8.0 | 27270801 |
ECLASS 5.1 | 27270801 |
ETIM 9.0 | EC001825 |
ETIM 8.0 | EC001825 |
ETIM 7.0 | EC001825 |
ETIM 6.0 | EC001825 |
ETIM 5.0 | EC001825 |
UNSPSC 12.1 | 41111613 |
The SmartRunner Matcher compares current height profiles with a previously taught-in height profile. The Matcher is based on innovative SmartRunner technology and combines the light section method for detecting height profiles with a 2-D vision sensor. The light section method involves projecting a laser line onto an object. This is then detected by a camera at a specific angle. A height profile is then created using the triangulation principle. This innovative laser technology provides reliable measurements on different surfaces.
Literature | Language | File Type | File Size |
---|---|---|---|
Application Report - Automatic Component Inspection in Car Body Manufacturing | ENG | 269 KB | |
Application Report - Automatic Detection of Vibration Dampers | ENG | 352 KB | |
Application Report - Ensuring Reliability in Ready-Meal Production | ENG | 208 KB | |
Application Report - Reliable Detection of Fasteners in Automotive Manufacturing | ENG | 298 KB | |
Application Report - Reliable Profile Camparison on Skids | ENG | 365 KB | |
Application Report - Uninterrupted Material Feed in Production Plants | ENG | 213 KB |
Brief Instructions | Language | File Type | File Size |
---|---|---|---|
Instruction leaflet / Beipackzettel | ALL | 838 KB | |
Manuals | |||
Manual | ENG | 9223 KB |
CAD | Language | File Type | File Size |
---|---|---|---|
CAD 3-D / CAD 3-D | ALL | STP | 8066 KB |
CAD Portal / CAD Portal | ALL | LINK | --- |
CAE | |||
CAE EPLAN Data Portal / CAE EPLAN Data Portal | ALL | LINK | --- |
CAE EPLAN macro EDZ / CAE EPLAN Makro EDZ | ALL | EDZ | 59 KB |
Declaration of Conformity | Certificate No. | Language | File Type | File Size |
---|---|---|---|---|
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-3518F | ALL | 39 KB | |
UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F) | DOC-6621 | ALL | 224 KB |
Software Tools | Release Info | File Type | File Size |
---|---|---|---|
Software Vision Configurator / Software Vision Configurator | V6.7.0 | ZIP | 65423 KB |
Accessories | ||||||
---|---|---|---|---|---|---|
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|