Select Your Country
PS1000-A6-24.10 Power Supply
Key Benefits at a Glance
- 100 V AC to 240 V AC wide-range input
- 1-phase
- Output 24 V DC, 10 A, 240 W
- Housing width 39 mm
- Efficiency up to 95.2 %
- Minimal inrush current surge
- DC OK relay contact
- Suitable for Zone 2/Div. 2 mounting
Show more



Note
All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
EN
- EN
- DE
- ES
- FR
- PL
Technical data of PS1000-A6-24.10
| Efficiency | 93.6 % at 120 V AC 95.2 % at 230 V AC | |
| Power dissipation | 16.4 W at 120 V AC 12.1 W at 230 V AC |
| Voltage range | 100 ... 240 V AC (-15 %/+10 %), 50 ... 60 Hz (±6 %) 110 ... 150 V DC (±20 %) | |
| Current | 2.15 A at 120 V AC 1.13 A at 230 V AC 2.35 A at 110 V DC for lower output currents see technical information | |
| Inrush current | 6 A peak at 120 V AC and ambient temperature 40 °C (104 °F) 9 A peak at 230 V AC and ambient temperature 40 °C (104 °F) | |
| Capacity factor | 0.99 at 120 V AC 0.97 at 230 V AC |
| Rated voltage | Ur | 24 V DC |
| Voltage range | 24 ... 28 V DC factory setting: 24.1 V | |
| Rated current | Ir | 10 A |
| Current | 12 ... 10.3 A at ambient temperature < 45 °C (113 °F) 10 ... 8.6 A at ambient temperature 60 °C (140 °F) 7.5 ... 6.5 A at ambient temperature 70 °C (158 °F) linear power derating see technical information | |
| Power | 240 W | |
| Ripple | max. 50 mV pp | |
| Hold-up time | 37 ms at 120 V AC 37 ms at 230 V AC | |
| Overload behavior | continuous current at output voltage > 13 V DC Hiccup behaviour at output voltage < 13 V DC | |
| Short-circuit current | typ. 30.5 A for up to 12 ms, load impedance < 45 mΩ max. 5 Arms average continuous current, load impedance 50 mΩ | |
| Voltage limitation | typ. 30.5 V DC max. 32 V DC |
| Connection | terminals 13, 14 | |
| Output type | relay contact DC OK - contact is closed if the output voltage is > 90 % of the adjusted output voltage | |
| Contact loading | max. 60 V DC/0.3 A ; 30 V DC/1 A ; 30 V AC/0.5 A resistive load min. 1 mA at 5 V DC |
| Input/Output | SELV/PELV |
| Display elements | LED green: status DC OK - LED lights up if the output voltage is > 90 % of the adjusted output voltage | |
| Control elements | potentiometer | |
| Configuration | setting of the output voltage via potentiometer |
| Electromagnetic compatibility | |||||
| |||||
| Low voltage | |||||
| |||||
| RoHS | |||||
| |||||
| Degree of protection | EN 60529 | |
| Shock resistance | EN 60068-2-27 | |
| Vibration resistance | EN 60068-2-6 |
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) , see technical information | |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Relative humidity | 5 ... 95 %, non-condensing | |
| Shock resistance | 20 g , 11 ms or 30 g , 6 ms | |
| Vibration resistance | 2 ... 17.8 Hz : ± 1.6 mm , 17.8 ... 500 Hz : 2 g |
| Housing material | aluminum alloy , galvanized steel | |||||||
| Degree of protection | IP20 | |||||||
| Connection | ||||||||
| ||||||||
| Mass | approx. 600 g | |||||||
| Dimensions | 39 x 124 x 117 mm (W x H x D) , without DIN mounting rail | |||||||
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 | |||||||
| ATEX approval | ||||||||
| ||||||||
| Directive conformity | ||||||||
| ||||||||
| UL approval | E350173 , E223176 | ||||||||||
| IECEx approval | |||||||||||
| |||||||||||
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
Related Pages
Are you looking for more information? Feel free to learn more on our related pages.
