選擇您所在的國家/地區
M-LB-Ex-4242 Surge Protection Barrier
主要优势一览
- Surge protection for 2 signal lines
- Nominal voltage 24 V
- Surge protection barrier for non-grounded signal lines
- Max. surge current (8/20 µs) 20 kA
- Uninterruptable operation (auto reset)
- Status indication
- Modular design, pluggable
- Up to SIL 3 acc. to IEC/EN 61508
显示详情






注意
在轉換前以Pepperl+Fuchs GmbH或Pepperl+Fuchs AG名義發布的所有產品相關文件(如證書、符合性聲明等)也適用於Pepperl+Fuchs SE。
EN
- EN
- DE
- ES
- FR
- PL
M-LB-Ex-4242 技術數據
| Device type | Type 1/P2 acc. to EN 61643-11 | |
| Number of protected signal lines | 2 | |
| Topology | non-grounded |
| Safety Integrity Level (SIL) | SIL 3 |
| Connection | protected area: terminals 1', 2' unprotected area: terminals 1, 2 | |
| Leakage current | < 30 µA bei Uc , line-line < 10 nA bei Uc , line-earth | |
| Nominal voltage | UN | 24 V |
| Maximum continuous operating voltage | Uc | 25.4 V AC and 36 V DC |
| Nominal load current | IL | 0.5 A at 80 °C (176 °F) |
| Series resistance | 1 Ω per line | |
| Impulse discharge current (10/350 µs) | Iimp | 1.5 kA per line |
| Nominal discharge current (8/20 µs) | In | 5 kA per line |
| Max. surge current (8/20 µs) | Imax | 20 kA |
| Total discharge current (8/20 µs) | Itotal | 10 kA |
| Voltage protection level | Up | max. 65 V line-line for nominal discharge current In max. 1100 V line-earth for nominal discharge current In |
| Impulse reset time | < 30 ms | |
| Cut-off frequency | fG | 3.5 MHz , line-line |
| Display elements | status display operating state (green) fault indication (red) |
| Degree of protection | IEC 60529:2013 | |
| Functional safety | IEC/EN 61508:2010 | |
| Surge protective devices for low voltage | EN 61643-21:2001+A1:2009+A2:2013 IEC 61643-21:2001+A1:2008+A2:2012 |
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) For usage in hazardous area observe the EU-type examination certificate. | |
| Storage temperature | -40 ... 80 °C (-40 ... 176 °F) | |
| Relative humidity | max. 95 % , without condensation | |
| Corrosion resistance | acc. to ISA-71.04, severity level G3 |
| Degree of protection | IP20 | ||||
| Connection | spring terminals with push-in connection technology | ||||
| Core cross section | 0.2 ... 2.5 mm2 one wire 0.2 ... 2.5 mm2 fine-strand | ||||
| Material | |||||
| |||||
| Mass | approx. 35 g | ||||
| Dimensions | 6 x 90 x 69 mm (0.24 x 3.5 x 2.7 inch) (W x H x D) | ||||
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 | ||||
| EU-type examination certificate | TÜV 22 ATEX 8880 X | ||||||||||||||||||||||
| |||||||||||||||||||||||
| Directive conformity | |||||||||||||||||||||||
| |||||||||||||||||||||||
| IECEx approval | ||||||||
| ||||||||
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |

