選擇您所在的國家/地區
KFD2-RCI-1 Solenoid Driver
主要优势一览
- 1-channel signal conditioner
- 24 V DC supply (Power Rail)
- Output 20.4 mA at 13.5 V DC
- 19 V DC ... 30 V DC input
- Test pulse immunity
- Line fault detection (LFD)
- Up to SIL 3 acc. to IEC/EN 61508
显示详情






注意
在轉換前以Pepperl+Fuchs GmbH或Pepperl+Fuchs AG名義發布的所有產品相關文件(如證書、符合性聲明等)也適用於Pepperl+Fuchs SE。
EN
- EN
- DE
- ES
- FR
KFD2-RCI-1 技術數據
| Signal type | Digital Output |
| Safety Integrity Level (SIL) | SIL 3 |
| Connection | Power Rail or terminals 14+, 15- | |
| Rated voltage | Ur | 19 ... 30 V DC |
| Rated current | Ir | < 35 mA |
| Power consumption | < 0.8 W |
| Connection side | control side | |
| Connection | terminals 10+, 11- | |
| Test pulse length | max. 2 ms from DO card | |
| Input current | 40 mA at 19 ... 30 V DC | |
| Signal level | 1-signal: 19 ... 30 V DC 0-signal: 0 ... 5 V DC | |
| Power consumption | < 1.2 W | |
| Operating mode | loop powered |
| Connection side | field side/control side | ||||||||||||||||
| Connection | terminals 1+, 3- (terminals 1+, 2 for test loop) | ||||||||||||||||
| Internal resistor | Ri | approx. 275 Ω | |||||||||||||||
| Current | Ie | ≤ 20.4 mA | |||||||||||||||
| Voltage | Ue | ≥ 13.5 V | |||||||||||||||
| Open loop voltage | Us | > 16 V | |||||||||||||||
| Voltage | 1-signal: > 13.5 V | ||||||||||||||||
| Current | 1-signal: 20.4 A 0-signal: 4.2 mA | ||||||||||||||||
| Load | max. 650 Ω | ||||||||||||||||
| Response time | < 40 ms input to output | ||||||||||||||||
| Line fault detection | short circuit voltage < 1 V , open circuit voltage > 16 V | ||||||||||||||||
| Output II | |||||||||||||||||
| |||||||||||||||||
| Field circuit/control circuit | basic insulation according to IEC 61010-1, rated insulation voltage 300 Veff | |
| Input/power supply | functional insulation, rated insulation voltage 50 Veff | |
| Output II/power supply | functional insulation, rated insulation voltage 50 Veff |
| Display elements | LEDs | |
| Control elements | DIP switch | |
| Configuration | via DIP switches | |
| Labeling | space for labeling at the front |
| Electromagnetic compatibility | |||||
| |||||
| Electromagnetic compatibility | NE 21:2012 | |
| Degree of protection | IEC 60529:2001 |
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) |
| Degree of protection | IP20 | ||||||||||
| Connection | screw terminals | ||||||||||
| Mass | approx. 150 g | ||||||||||
| Dimensions | 20 x 119 x 115 mm (0.8 x 4.7 x 4.5 inch) (W x H x D) , housing type B2 | ||||||||||
| |||||||||||
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 | ||||||||||
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |

