選擇您所在的國家/地區
M-LB-4.275TT.D Surge Protection Barrier
主要优势一览
- Surge protection for 4 supply lines
- Type 2 acc. to EN 61643-11
- For TT and TN-S systems (230 V AC/400 V AC)
- Pre-wired unit
- Operating state and fault indication of every protected line
- Fault indication output
- DIN rail mountable
显示详情









注意
在轉換前以Pepperl+Fuchs GmbH或Pepperl+Fuchs AG名義發布的所有產品相關文件(如證書、符合性聲明等)也適用於Pepperl+Fuchs SE。
EN
- EN
- DE
- ES
- FR
- PL
M-LB-4.275TT.D 技術數據
| Device type | Type 2 acc. to EN 61643-11 Class II acc. to IEC 61643-11 | |
| Number of protected supply lines | 4 | |
| Suitable components | protection module M-LB-1.275.M protection module M-LB-1.NPE.M |
| Nominal voltage | UN | 230 V AC, 50 ... 60 Hz 400 V AC, 50 ... 60 Hz |
| Maximum continuous operating voltage | Uc | 275 V AC, 50 ... 60 Hz (L-N) 255 V AC, 50 ... 60 Hz (N-PE) |
| Temporary over-voltage | Ut | 335 V/5 s (TOV withstand) (L-N) 1200 V/200 ms (TOV withstand) (N-PE) |
| Nominal discharge current (8/20 µs) | In | 20 kA |
| Max. surge current (8/20 µs) | Imax | 40 kA |
| Total discharge current (8/20 µs) | Itotal | 12 kA (N-PE) |
| Voltage protection level | Up | max. 1.25 kV (L-N) max. 1 kV at 5 kA (L-N) ≤ 1.5 kV (N-PE) |
| Reaction time | tA | max. 25 ns (L-N) max. 100 ns (N-PE) |
| Follow current extinguishing capability | Ifi | 100 A eff (N-PE) |
| Short-circuit-proof | 50 kA eff | |
| Overcurrent protection | max. 125 A gG , mains-side |
| Connection | terminals 11, 12, 14 | |
| Output | volt-free change-over contact | |
| Switch power | AC: 250 V / 0.5 A DC: 250 V/0.1 A; 125 V/0.2 A; 75 V/0.5 A; 24 V/0.5 A |
| Display elements | status display operating state (green) fault indication (red) |
| Low voltage | |||||
| |||||
| Degree of protection | IEC 60529 | |
| Shock resistance | EN 60068-2 | |
| Vibration resistance | EN 60068-2 |
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) | |
| Relative humidity | 5 ... 95 % |
| Degree of protection | IP20 | ||||
| Core cross section | - min. 1.5 mm2 solid/flexible - max. 35 mm2 stranded/25 mm2 flexible - max. 1.5 mm2 solid/flexible (for remote signalling contact) | ||||
| Material | |||||
| |||||
| Mass | approx. 480 g | ||||
| Dimensions | 72 x 90 x 72 mm (2.8 x 3.6 x 2.8 inch) (W x H x D) , 4 TE acc. to DIN 43880 | ||||
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 | ||||
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
相關頁面
您是否想查看更多資訊?請隨時通過相關頁面了解更多內容。

