Serviceline Industrial Sensors
Serviceline Explosion Protection

应用于过程自动化应用的无线HART网络

无线通讯很快在自动化应用中获得了认可。对过程自动化而言,构成挑战的不是数据的数量,而是架接距离。每当工厂架构不允许传统的接线时,测量值只能通过频繁访问现场的方式才能获取。

为此,无线HART提供了一个高性价比的解决方案,使得测量值在常规基础上可被利用,这就提高了工厂的生产质量,也使得工厂的运营更加经济

无线HART构建的网络中,每个设备可以同时作为信号源中继器。通过贯穿整个网络的单个信号的路径,一个广阔的网络结构能够被建成。


About WirelessHART Adapter

Pepperl+Fuchs offers an adapater to connect sensors to a control system or asset management system with a wireless network. This WirelessHART product supports the installation of field devices from different manufacturers without the need for additional wiring effort and costs.

The WirelessHART adapter can be connected to every conventional HART or 4 mA … 20 mA field device directly or with a short cable. It reads the data of the field device via HART or translate the 4 mA … 20 mA signal to a digital value and transmits the data to the WirelessHART network. This highly flexible solution turns every field device into a WirelessHART field device.


WirelessHART Adapter BULLET

The BULLET is the only WirelessHART adapter on the market in an Ex d housing. Simply connect the BULLET to your field device and enable efficient, wireless signal transmission.