请注意：所有以Pepperl + Fuchs GmbH或Pepperl + Fuchs AG名义发行的产品相关文件，例如证书，合格声明等，同样适用于Pepperl + Fuchs SE。
技术参数节选 ODT-MAC400-ND-RD-MC
| 产品阐述 |
|---|
| Stationary multicode read device for all common 1-D, 2-D and Pharmacodes at speeds of 6 m/s, angled line-of-sight, VGA resolution, Ethernet, RS 232 |
| General specifications | ||
|---|---|---|
| Light type | Integrated LED lightning (red) | |
| Laser nominal ratings | ||
| Note | LASER LIGHT , DO NOT STARE INTO BEAM | |
| Laser class | 2 | |
| Wave length | 650 nm | |
| Beam divergence | < 1.5 mrad | |
| Maximum optical power output | 0.5 mW | |
| Symbologies | Maxi Code, PDF 417, Data Matrix, QR Code, MicroPDF 417, GoCode, UCC Composite, Aztec Code, Code 39, Code 128, UPC, EAN, JAN, Int 2 of 5, Codabar, Code 93, UCC RSS, POSTNET, PLANET, Japanese Post, Australia Post, Royal Mail, RM4SCC, KIX Code, Codablock, Pharmacode | |
| Read distance | 60 mm | |
| Depth of focus | ± 5 mm | |
| Reading field | 30 mm x 20 mm | |
| Evaluation frequency | max. 30 Hz | |
| Target velocity | triggered max. 10 m/s | |
| Nominal ratings | ||
| Camera | ||
| Type | CMOS , Global shutter | |
| Number of pixels | 752 x 480 pixels | |
| Gray scale | 256 | |
| Image recording | real-time , Program-controlled or triggered externally | |
| Indicators/operating means | ||
| LED indication | for good/poor reading | |
| Electrical specifications | ||
| Operating voltage | 24 V DC ± 15% , PELV | |
| No-load supply current | max. 250 mA | |
| Power consumption | 6 W | |
| Interface | ||
| Physical | RS 232 | |
| Protocol | ASCII | |
| Transfer rate | 9600 ... 115200 Bit/s | |
| Cable length | max. 30 m | |
| Interface 1 | ||
| Interface type | Ethernet | |
| Protocol | TCP/IP | |
| Transfer rate | 100 MBit/s | |
| Cable length | max. 30 m | |
| Input | ||
| Input voltage | to be applied externally 24 V ± 15% PELV | |
| Number/Type | 1 trigger input optional up to 4 inputs |
|
| Input current | approx. 5 mA at 24 V DC | |
| Cable length | max. 30 m | |
| Output | ||
| Number/Type | 2 electronic outputs, PNP , optically decoupled | |
| Switching voltage | to be applied externally 24 V ± 15 % PELV | |
| Switching current | 100 mA each output | |
| Cable length | max. 30 m | |
| Output 1 | ||
| Output type | Video output, RGB (75 Ohm), 1 Vpp | |
| Resolution | VGA, 800 x 600 pixels | |
| Compliance with standards and directives | ||
| Directive conformity | ||
| EMC Directive 2004/108/EC | EN 61326-1 , EN 61000-6-4 | |
| Standard conformity | ||
| Noise immunity | EN 61326-1 | |
| Emitted interference | EN 61000-6-4 | |
| Degree of protection | EN 60529 | |
| Laser class | IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007 | |
| Ambient conditions | ||
| Ambient temperature | 0 ... 45 °C (32 ... 113 °F) | |
| Storage temperature | -20 ... 60 °C (-4 ... 140 °F) | |
| Mechanical specifications | ||
| Degree of protection | IP20 | |
| Connection | Video: 7-pin socket Power supply/interfaces/inputs and outputs: Sub-D 15-pin UNC LAN : RJ-45 socket, 8-pin |
|
| Material | ||
| Housing | powder coated diecast zinc | |
| Mass | approx. 760 g | |
| Dimensions | ||
| Height | 60 mm | |
| Width | 60 mm | |
| Depth | 120 mm | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27280103 |
| ECLASS 12.0 | 27280103 |
| ECLASS 11.0 | 27280103 |
| ECLASS 10.0.1 | 27280103 |
| ECLASS 9.0 | 27280103 |
| ECLASS 8.0 | 27280103 |
| ECLASS 5.1 | 27280103 |
| ETIM 9.0 | EC002999 |
| ETIM 8.0 | EC002999 |
| ETIM 7.0 | EC002999 |
| ETIM 6.0 | EC002999 |
| ETIM 5.0 | EC002999 |
| UNSPSC 12.1 | 43211701 |
| Product category / 产品类的 |
Details: ODT-MAC400-ND-RD-MC
Datasheet: ODT-MAC400-ND-RD-MC
| Datasheet | 文件类型 | 文件大小 |
|---|---|---|
| Datasheet ODT-MAC400-ND-RD-MC | 369 KB | |
| Fiche de données ODT-MAC400-ND-RD-MC | 337 KB | |
| Datenblatt ODT-MAC400-ND-RD-MC | 323 KB | |
| Hoja de datos ODT-MAC400-ND-RD-MC | 324 KB |
Documents: ODT-MAC400-ND-RD-MC
| Manuals | 文件类型 | 文件大小 |
|---|---|---|
| Manual ODT-MAC400-*-MC/MAC401-*-MC/MAC403-*-MC | 6115 KB | |
| Handbuch ODT-MAC400-*-MC/MAC401-*-MC/MAC403-*-MC | 6074 KB | |
| Short instructions, safety information | ||
| Brief Instructions - ODT-MAC40*-*-*-MC | 2581 KB | |
| Kurzanleitung - ODT-MAC40*-*-*-MC | 2609 KB |
CAD+CAE: ODT-MAC400-ND-RD-MC
| CAD | 文件类型 | 文件大小 |
|---|---|---|
| CAD 3-D / CAD 3-D | STP | 1821 KB |
配套产品: ODT-MAC400-ND-RD-MC
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
倍加福（北京）过程自动化控制设备有限公司
北京市经济技术开发区
科创十四街99号7号楼3101室
101111 Beijing
中国
pa-info@cn.pepperl-fuchs.com
+86 10 5901 7000
上海倍加福工业自动化贸易有限公司
上海市静安区市北工业园区江场三路
219号4楼
200436 上海
中国
fa-info@cn.pepperl-fuchs.com
+86 21 6630 3939
沪ICP备20009978号 | © 2024 版权所有。
德国倍加福公司（P+F）是全球自动化行业中久负盛名的专业传感器公司。倍加福作为全球自动化领域的电子传感与零部件的生产主导者，凭借不断的创新，恒久的质量保证，稳健的发展，保证了迄今六十余年的辉煌成就。倍加福在全球范围内拥有6300名员工，位于德国，美国，新加坡，匈牙利，印度尼西亚和越南的生产基地几乎全部通过了ISO9001的质量认证。