Support Industrielle sensorer
Support Explosion Protection

Thru-beam sensor (pair) OBE35M-R202-SK2

OBE35M-R202-SK2
  • Version for universal voltages
  • Medium design with versatile mounting options
  • Degree of protection IP67
  • Mounting on full metal sockets
  • Very bright, highly visible light spot
  • Highly visible LEDs for Power ON and switching state
  • Easy to use
  • Image is generic for this device type and may deviate from the specific variant

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Hent hele databladet som PDF:


Uddrag af datablad: Tekniske data for   OBE35M-R202-SK2

System components
EmitterOBE35M-R202-SK
ReceiverOBE35M-R202-K2
General specifications
Effective detection range0 ... 35 m
Threshold detection range47 m
Light sourceLED
Light typemodulated visible red light
LED risk group labellingexempt group
Transmitter frequencyF1 = 8.2 kHz
Diameter of the light spotapprox. 1200 mm at a distance of 35 m
Opening angle2 °
Ambient light limitEN 60947-5-2 : 40000 Lux
Functional safety related parameters
MTTFd422 a
Mission Time (TM)20 a
Diagnostic Coverage (DC)0 %
Indicators/operating means
Operation indicatorLED green: power on
Function indicatorYellow LED:
Permanently lit - light path clear
Permanently off - object detected
Flashing (4 Hz) - insufficient operating reserve
Flashing (8 Hz) - fault detected, the outputs maintain the status
Control elementsReceiver: light/dark switch
Control elementsReceiver: sensitivity adjustment
Electrical specifications
Operating voltage24 ... 240 V DC (-30 °C ≤ Tamb ≤ 60 °C)
24 ... 240 V AC (10 °C ≤ Tamb ≤ 60 °C)
30 ... 240 V AC (-30 °C ≤ Tamb ≤ 60 °C)
No-load supply currentEmitter: ≤ 15 mA
Receiver: ≤ 30 mA at 24 V Operating voltage
Protection classII
Rated insulation voltage250 V
Rated impulse withstand voltage2500 V
Power consumptionEmitter: ≤ 0.35 VA
Receiver: ≤ 0.75 VA
FuseSafety fuse ≤ 2 A (slow-blow) according to IEC 60127-2 Sheet 1
Recommendation: after a short circuit, check that the device is functioning correctly.
Output
Switching typeThe switching type of the sensor is adjustable. The default setting is:
Q - BK: normally-open / dark-on
/Q - GY: normally-closed / light-on
C - WH: Common
Signal outputRelay, 1 alternator
Switching voltagemax. 240 V AC/DC
Switching currentmax. 2.5 A , see section characteristic curve
Switching powerDC: max. 95 W AC: max. 600 VA
Usage categoryDC-12 , DC-13 , AC-12 u. AC-140
Switching frequency25 Hz
Response time≤ 20 ms
Conformity
Product standardEN 60947-5-2 , EN 60947-1
Approvals and certificates
UL approvalE87056 , cULus Listed
Ambient conditions
Ambient temperature-30 ... 60 °C (-22 ... 140 °F) , fixed cable
-20 ... 60 °C (-4 ... 140 °F) , movable cable not appropriate for conveyor chains
Storage temperature-40 ... 70 °C (-40 ... 158 °F)
Pollution degree3
Mechanical specifications
Degree of protectionIP67
Connection2 m fixed cable
Material
HousingPC (Polycarbonate)
Optical facePMMA
MassEmitter: approx. 90 g
receiver: approx. 120 g
Dimensions
Height62 mm
Width20 mm
Depth42 mm
Cable length2 m

Classifications

SystemClasscode
ECLASS 13.027270901
ECLASS 12.027270901
ECLASS 11.027270901
ECLASS 10.0.127270901
ECLASS 9.027270901
ECLASS 8.027270901
ECLASS 5.127270901
ETIM 9.0EC002716
ETIM 8.0EC002716
ETIM 7.0EC002716
ETIM 6.0EC002716
ETIM 5.0EC002716
UNSPSC 12.139121528

Details: OBE35M-R202-SK2

Informative Literature: OBE35M-R202-SK2

Language Selection:
LiteratureSprogFil typeFil størrelse
Application Report - Reliable Detecting Foil Tears in Battery Cell ManufacturingENGPDF163 KB

Design / Simulation: OBE35M-R202-SK2

Language Selection:
CADSprogFil typeFil størrelse
CAD 3-D / CAD 3-DALLSTP767 KB
CAD 3-D additional / CAD 3-D additionalALLSTP1013 KB

Approvals: OBE35M-R202-SK2

Language Selection:
CertificatesCertifikat nr.SprogFil typeFil størrelse
/cert/cert7189.pdfE87056, Vol. 1, Sec. 62ALLPDF531 KB
Declaration of Conformity
EU Declaration of Conformity (P+F)TDOC-7384_DANDANPDF220 KB
UK Declaration of Conformity (P+F)TDOC-7385_ENGENGPDF196 KB

Tilhørende produkter: OBE35M-R202-SK2

Accessories
Mounting bracket narrowfa
Mounting aid for round steel ø 12 mm or sheet 1.5 mm ... 3 mmfa
Mounting aid for round steel ø 12 mm or sheet 1.5 mm ... 3 mmfa
R10x and R20x series photoelectric sensors

For the first time, a consistent solution range of photoelectric functional principles and innovative technologies is available in identical housings. Users benefit from a uniform operating concept across the entire portfolio. Discover the R100, R101, R103, R200 and R201 series ...

ML100 Photoelectric Sensor

Whether glass, solar wafers or printed circuit boards: The photoelectric sensors of the ML100 series are precisely tailored to meet the requirements of various complex detection tasks. Learn more about the portfolio and find the ideal sensor for your application ...