Sélectionnez votre pays
HR-6*5*** Multiple Rod Electrode
Principaux avantages en un coup d'œil
- Sensor for conductive limit value detection
- 1 to 5 electrode rods
- Electrodes Ø4 mm (0.16 inch) or Ø6 mm (0.24 inch)
- Different rod and thread materials






Remarque
Tous les documents relatifs aux produits, tels que les certificats, les déclarations de conformité, etc., qui ont été émis avant la conversion sous le nom de Pepperl+Fuchs GmbH ou Pepperl+Fuchs AG, s'appliquent également à Pepperl+Fuchs SE.
EN
- EN
- DE
- PT
Données techniques relatives à HR-6*5***
| Type | sensor for conductive limit value detection | |
| Equipment architecture | A measuring system consists of a rod electrode HR-6*5*** with electrode relay KFA6-ER 1.6, KFD2-ER 1.6, KFD2-ER-Ex1.W.LB or KFA6-ER-Ex1.W.LB. | |
| Series | HR-6*5*** |
| Measured variable | measuring voltage directly from the electrode relay |
| Output signal | electrode relay creates switch signal corresponding to the selected responsiveness. |
| Electromagnetic compatibility | |||||
| |||||
| Degree of protection | IEC 60529:2001 |
| Process conditions | ||||||||
| ||||||||
| Degree of protection | IP65 with terminal box | |
| Connection | terminals in the terminal box: connection, max. 2.5 mm2 | |
| Material | housing: stainless steel 1.4571/316Ti, PP or PTFE process connection: stainless steel 1.4571/316Ti, PP or PTFE electrode rod: stainless steel 1.4571/316Ti, Hastelloy C, titanium or tantalum | |
| Dimensions | housing: max. Ø65 mm (2.6 inch), height max. 75 mm (3 inch) rods: length L1 ... L5 max. 3000 mm (10 foot) | |
| Process connection | thread G1-1/4A to DIN/ISO 228/1 |
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
| Designation | - spacer, PTFE for Ø4 mm (0.16 inch) rods - spacer with clamp screw, PTFE, for Ø4 mm (0.16 inch) rods - spacer with clamp screw, PTFE, for Ø6 mm (0.24 inch) rods - counter nut G1-1/4A made of PVC - counter nut G1-1/4A made of stainless steel - LZ-1201, mounting angle of stainless steel 1.4571/316Ti with drilling for G1/2A - LZ-1203, mounting angle of stainless steel 1.4571/316Ti with drilling for G1-1/4A |
Pages associées
Vous cherchez plus d'informations ? N'hésitez pas à consulter nos pages associées pour en savoir plus.
