Distance measurement device VDM100-150-IBS
- Measuring method PRT (Pulse Ranging Technology)
- Non-contact precision measurement
- Ultra-fast data acquisition
- Active dynamic control
- Modern lightweight design, extremely robust
- Simple programming with 4 keys and luminous display
请注意：所有以Pepperl + Fuchs GmbH或Pepperl + Fuchs AG名义发行的产品相关文件，例如证书，合格声明等，同样适用于Pepperl + Fuchs SE。
下载PDF版完整参数表:
技术参数节选 VDM100-150-IBS
| 产品阐述 |
|---|
| Distance sensor for positioning tasks accurate to the millimeter, PRT, measuring range up to 150 m, INTERBUS, M12 plug |
| General specifications | ||
|---|---|---|
| Measurement range | 0.3 ... 150 m | |
| Reference target | Foil reflector 500 mm x 500 mm | |
| Light source | laser diode | |
| Laser nominal ratings | ||
| Note | VISIBLE AND INVISIBLE LASER RADIATION , DO NOT STARE INTO BEAM | |
| Laser class | Measuring laser: 1 Alignment laser: 2 |
|
| Wave length | Measuring laser: 905 nm Alignment laser: 660 nm |
|
| Beam divergence | Measuring laser: 2 mrad Alignment laser: 1 mrad |
|
| Pulse length | Measuring laser: 4 ns | |
| Repetition rate | Measuring laser: 20 kHz | |
| Maximum optical power output | Alignment laser: 0.6 mW |
|
| max. pulse energy | Measuring laser: 12 nJ | |
| Measuring method | Pulse Ranging Technology (PRT) | |
| Max. Motion velocity | 15 m/s | |
| Alignment aid | Laser pointer Laser class 2 | |
| Life span | > 100000 h | |
| Diameter of the light spot | < 35 cm at 150 m | |
| Ambient light limit | > 100000 Lux | |
| Resolution | 0.1 mm , adjustable | |
| Temperature influence | 0.03 mm/K | |
| Functional safety related parameters | ||
| MTTFd | 74 a | |
| Mission Time (TM) | 20 a | |
| Diagnostic Coverage (DC) | 0 % | |
| Indicators/operating means | ||
| Function indicator | 4 LEDs | |
| Control elements | Control panel (4 membrane keys) for setting parameters | |
| Parameterization indicator | Illuminated display for displaying measured values and parameterization | |
| Electrical specifications | ||
| Operating voltage | 18 ... 30 V DC | |
| No-load supply current | 250 mA (18 V) ... 150 mA (30 V) | |
| Protection class | III (operating voltage 50 V) | |
| Time delay before availability | < 10 s | |
| Interface | ||
| Interface type | INTERBUS | |
| Transfer rate | 500 kBit/s | |
| Input/Output | ||
| Input/output type | 2 PNP inputs/outputs, independent configuration, short-circuit protected, reverse polarity protected | |
| Input | ||
| Switching threshold | low: Ue < 6 V, high: Ue > 16 V |
|
| Output | ||
| Switching threshold | low: Ua < 1 V, high: Ua > Ub - 1 V |
|
| Switching current | 200 mA per output | |
| Compliance with standards and directives | ||
| Directive conformity | EMC Directive 2004/108/EC | |
| Standard conformity | ||
| Laser class | IEC 60825-1:2007 | |
| Measurement accuracy | ||
| Measured value output | 1 ms | |
| Average data age | 3 ms , 6 ms , 12 ms , 25 ms , 50 ms , adjustable | |
| Offset | max. 2 mm (between two devices) | |
| Absolute accuracy | ± 2.5 mm (> 3 m); ± 3.5 mm (0.3 m to 3 m) | |
| Repeat accuracy | < 0.5 mm | |
| Approvals and certificates | ||
| UL approval | cULus Listed | |
| Ambient conditions | ||
| Ambient temperature | -10 ... 50 °C (14 ... 122 °F) | |
| Storage temperature | -20 ... 70 °C (-4 ... 158 °F) | |
| Relative humidity | 95 % , no moisture condensation | |
| Mechanical specifications | ||
| Degree of protection | IP65 | |
| Connection | 4-pin, M12x1 connector, standard (supply) , 5-pin, M12x1 connector, B-coded (Bus In) , 5-pin, M12x1 socket, B-coded (Bus Out) , 8-pin, M12x1 connector, service |
|
| Material | ||
| Housing | ABS / PC | |
| Optical face | PMMA , hard coated | |
| Mass | approx. 700 g | |
| Dimensions | ||
| Height | 100 mm | |
| Width | 140 mm | |
| Length | 170 mm | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27270916 |
| ECLASS 12.0 | 27270916 |
| ECLASS 11.0 | 27270801 |
| ECLASS 10.0.1 | 27270801 |
| ECLASS 9.0 | 27270801 |
| ECLASS 8.0 | 27270801 |
| ECLASS 5.1 | 27270801 |
| ETIM 9.0 | EC001825 |
| ETIM 8.0 | EC001825 |
| ETIM 7.0 | EC001825 |
| ETIM 6.0 | EC001825 |
| ETIM 5.0 | EC001825 |
| UNSPSC 12.1 | 41111613 |
| Product category / 产品类的 | 光学测距仪 |
Details: VDM100-150-IBS
Product Documentation: VDM100-150-IBS
| Manuals | 语言 | 文件类型 | 文件大小 |
|---|---|---|---|
| Manual VDM100 | ENG | 1635 KB |
Design / Simulation: VDM100-150-IBS
| CAD | 语言 | 文件类型 | 文件大小 |
|---|---|---|---|
| CAD 3-D / CAD 3-D | ALL | STP | 4070 KB |
Approvals: VDM100-150-IBS
| Certificates | 证书号码 | 语言 | 文件类型 | 文件大小 |
|---|---|---|---|---|
| Canada USA UL Ordinary Location | E87056 | ALL | LINK | --- |
| EU Pepperl+Fuchs | PF08CERT1244 | ALL | 503 KB | |
| Declaration of Conformity | ||||
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-0473E | ALL | 228 KB | |
| UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F) | DOC-6920 | ALL | 225 KB | |
配套产品: VDM100-150-IBS
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
R2300 系列将四个扫描平面集成到一个 LiDAR 传感器中。与单层设备相比，它可以进行 3D 扫描，从而提供更可靠的测量结果。了解有关其优势、用例和技术的更多信息 ……
倍加福（北京）过程自动化控制设备有限公司
北京市经济技术开发区
科创十四街99号7号楼3101室
101111 Beijing
中国
pa-info@cn.pepperl-fuchs.com
+86 10 5901 7000
上海倍加福工业自动化贸易有限公司
上海市静安区市北工业园区江场三路
219号4楼
200436 上海
中国
fa-info@cn.pepperl-fuchs.com
+86 21 6630 3939
沪ICP备20009978号 | © 2024 版权所有。
德国倍加福公司（P+F）是全球自动化行业中久负盛名的专业传感器公司。倍加福作为全球自动化领域的电子传感与零部件的生产主导者，凭借不断的创新，恒久的质量保证，稳健的发展，保证了迄今六十余年的辉煌成就。倍加福在全球范围内拥有6300名员工，位于德国，美国，新加坡，匈牙利，印度尼西亚和越南的生产基地几乎全部通过了ISO9001的质量认证。