Forældede produkter: 1-channel isolated barrier, 230 V AC supply, Dry contact or NAMUR inputs, Relay contact output, Line fault detection (LFD), Reversible mode of operation, Up to SIL 2 acc. to IEC/EN 61508 / IEC/EN 61511, Housing width: 20 mm, Number of channels: 1-channel, Safety Integrity Level (SIL): SIL 2, Rated voltage: 207 ... 253 V AC, 45 ... 65 Hz, Field device: NAMUR sensor, Field device [2]: volt-free contact, Line fault detection, Type: 1 x relay (change-over contact), Reversible mode of operationpa
Forældede produkter: 1-channel isolated barrier, 24 V DC supply (Power Rail), Thermocouple, RTD, potentiometer or voltage input, Voltage output 0/1 V ... 5 V, Configurable by PACTware, Line fault (LFD) and sensor burnout detection, Up to SIL 2 acc. to IEC/EN 61508 / IEC/EN 61511, Housing width: 20 mm, Number of channels: 1-channel, Safety Integrity Level (SIL): SIL 2, Rated voltage: 20 ... 30 V DC, Type: 2-wire connection, Type [2]: 3-wire connection, Type [3]: 4-wire connection, Field device: resistance thermometerpa
Forældede produkter: 1-channel isolated barrier, 115 V AC supply, Dry contact or NAMUR inputs, Relay contact output, Line fault detection (LFD), Reversible mode of operation, Up to SIL 2 acc. to IEC/EN 61508 / IEC/EN 61511, Housing width: 20 mm, Number of channels: 1-channel, Safety Integrity Level (SIL): SIL 2, Rated voltage: 103.5 ... 126 V AC , 45 ... 65 Hz, Field device: NAMUR sensor, Field device [2]: volt-free contact, Line fault detection, Type: 1 x relay (change-over contact), Reversible mode of operationpa
Forældede produkter: 1-channel isolated barrier, 115 V AC supply, Dry contact or NAMUR inputs, Relay contact output, Fault relay contact output, Line fault detection (LFD), Reversible mode of operation, Up to SIL 2 acc. to IEC/EN 61508 / IEC/EN 61511, Housing width: 20 mm, Number of channels: 1-channel, Safety Integrity Level (SIL): SIL 2, Rated voltage: 103.5 ... 126 V AC , 45 ... 65 Hz, Field device: NAMUR sensor, Field device [2]: volt-free contact, Line fault detection, Type: 2 x relay (change-over contact)pa
Forældede produkter: 1-channel signal conditioner, Universal usage at different power supplies, Input 2-wire and 3-wire transmitters, current and voltage sources, Current and voltage output, Housing width: 20 mm, Number of channels: 1-channel, Rated voltage: 19 ... 90 V DC / 48 ... 253 V AC, Field device: 2-wire transmitter, Field device [2]: 3-wire transmitter, Field device [3]: current source, Signal: 0/4 ... 20 mA, Signal [2]: 0/2 ... 10 V, Signal: 1 x 0/4 ... 20 mA (current source), Signal [2]: 1 x 0/2 ... 10 Vpa
Forældede produkter: 1-channel isolated barrier, 230 V AC supply, Dry contact or NAMUR inputs, Relay contact output, Fault relay contact output, Line fault detection (LFD), Reversible mode of operation, Up to SIL 2 acc. to IEC/EN 61508 / IEC/EN 61511, Housing width: 20 mm, Number of channels: 1-channel, Safety Integrity Level (SIL): SIL 2, Rated voltage: 207 ... 253 V AC, 45 ... 65 Hz, Field device: NAMUR sensor, Field device [2]: volt-free contact, Line fault detection, Type: 2 x relay (change-over contact)pa
Forældede produkter: 2-channel isolated barrier, 230 V AC supply, Dry contact or NAMUR inputs, Relay contact output, Line fault detection (LFD), Reversible mode of operation, Up to SIL 2 acc. to IEC/EN 61508 / IEC/EN 61511, Housing width: 20 mm, Number of channels: 2-channel, Safety Integrity Level (SIL): SIL 2, Rated voltage: 207 ... 253 V AC, 45 ... 65 Hz, Field device: NAMUR sensor, Field device [2]: volt-free contact, Line fault detection, Type: 2 x relay (change-over contact), Reversible mode of operationpa
Forældede produkter: Diffuse sensor with measurement core technology, large housing design, background suppression and 3 more adjustable operating modes, IO-Link interface, 800 mm adjustable detection range, red light, 2 push-pull outputs, fixed cable, Cost-optimized series for standard tasks, Sensing-by-ranging functionality, IO-Link interface for service and process data, PowerBeam transmitter LED, Large adjustment range can be precisely definedfa
100% product traceability in the production process is a requirement Marking small products can be difficult Data Matrix Barcodes are an ideal solution Using the Data Matrix ECC 200 codes ensures reliable product tracing and quality assurance ... using the Data Matrix ECC 200 . This 2D-code is used to encode characters in a very small space. The limits are only set by the respective printing technology employed. The label is a tried and trusted means of identification. Modern methods facilitate ...
Se oversigt: The HART-Multiplexer-System from Pepperl+Fuchs enables communication between a PC and "smart" field devices supporting the HART protocol Existing plants can be modernized and extended easily by using the advantages of HART ... Se oversigt: The HART-Multiplexer-System from Pepperl+Fuchs enables communication between a PC and "smart" field devices supporting the HART protocol. Existing plants can be modernized and extended ea ...
The R10x and R20x series photoelectric sensors offer a consistent range of photoelectric functional principles and innovative technologies in each identical housing Get to know the new sensor generat ... , the multipixel array. Depending on the position of the light spot on the receiver, the distance of the object to the sensor is calculated by geometric triangulation. This is done using intelligent software algorithms. This enables measuring and ...
The Tab-Ex 04 Pro from Pepperl+Fuchs is the world's first 5G Android™ tablet with a 10-inch display Learn more about the next-generation mobility device for use in Zone 2/22 and Division 2 hazardous ... be expanded from 512 GB to 1 TB using an external microSD card. The device has been enhanced with 5G and Wi-Fi® 6E connectivity , providing the latest in data speeds and functionality. The US market version also offers connectivity for LTE Band 48 to ...
The WILSEN platform offers three LoRa-based, battery-powered sensor solutions for a wide range of M+O applications ... API Key. Alternatively, the devices can be parameterized directly on site via Bluetooth® LE using a mobile device app for Android or iOS . As another helpful component for optimizing battery performance, Pepperl+Fuchs also offers a free, web-based ...
Get an overview of Pepperl+Fuchs' broad portfolio of HMI systems for process industries ... hazardous areas. VisuNet RM Shell 6 VisuNet RM Shell 6 is the latest generation firmware for VisuNet Remote Monitors and Box Thin Clients from Pepperl+Fuchs. Using standard Ethernet technology , the software communicates with the process control system or ...
Besides tried-and-tested functions, the Tab-Ex® tablets come with innovative features like the integration of augmented reality applications that make Industry 40/IIoT applications easy to implement ... advantage of both designs! More about the DeX app Samsung KNOX High Security Standard for Your Mobile Devices The KNOX mobile security solution is integrated into Samsung mobile devices to protect confidential data and processes. Using the KNOX platform, IT ...
Pepperl+Fuchs’ LoRaWAN based ultrasonic sensor WILSEN is a sturdy solution for fill level monitoring and distance measurement ... the silo using the supplied mounting plate , from where it continuously transmits level data via radio. In the unlikely event that dust deposits occur on the sensor's low-adhesion transducer , these usually have no effect on the reliability of the ...
Se oversigt: The WCS position encoding system from Pepperl+Fuchs includes mechanical components for mounting the code rail ... flexibility, the WCS code rails can also be mounted in horizontal and vertical curves using our code rail holders. Aluminum profiles in combination with the WCS guiding trolley guarantee optimum positioning of read heads and also protect them from vibrations ...
48V motor control modules have several advantages, as they enable the construction of flexible and cost-efficient conveyor lines Learn more about Pepperl+Fuchs' G20 48V modules for complex conveyor t ... technology in the future based on a modular system. Highlights of the G20 48 V Motor Control Module G20 48 V modules for controlling DC motorized rollers with twice the power using the same power consumption Increased cost efficiency: Savings on power supply ...
11-20/229Punkter pr side:
Gav din søgning ingen resultater?
Tip: Sæt * før ordet, ændre søgeordet, kontroller for stavefejl eller kontakt os .