Línea de servicio de Sensores Industriales
Atención al cliente para protección contra explosiones
6100 series vent EPV-6100-MP-*
- Maximum flow rate of 14,000 l/min
- Intrinsically safe when connected to 6100 control unit
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Descargue la hoja de datos completa en PDF:
Extracto de la hoja de datos: Información técnica del EPV-6100-MP-*
| Descripción del producto |
|---|
| 6100 series purge and pressurization enclosure protection vent |
| General specifications | ||
|---|---|---|
| Series | 6100 Series | |
| Hazardous environment | gas | |
| Electrical specifications | ||
| Connection | ||
| Power | Intrinsically safe connection to the 6100 control unit | |
| Signal | 2-wire intrinsically safe pressure switch | |
| Connection | 2-wire | |
| Pneumatic parameters | ||
| Protective gas supply | Clean air or inert gas | |
| Safe pressure | 0.625 mbar [0.25 in wc / 6.4 mm wc) | |
| Enclosure pressure | 0 ... 50 mbar (0 ... 20.1 in wc / 0 ... 510.5 mm wc) | |
| Purge flow and enclosure pressure rate | EPV-6100-MP-020: 2000 l/min at approximately 11.5 mbar (70.6 cfm at approximately 4.6 in wc) EPV-6100-MP-050: 5000 l/min at approximately 32.5 mbar (176.5 cfm at approximately 13.1 in wc) EPV-6100-MP-080: 8000 l/min at approximately 30.5 mbar (282.4 cfm at approximately 12.3 in wc) EPV-6100-MP-110: 11000 l/min at approximately 26.5 mbar (388.3 cfm at approximately 10.6 in wc) EPV-6100-MP-140: 14000 l/min at approximately 25.5 mbar (494.2 cfm at approximately 10.2 in wc) |
|
| Flow rate for leakage compensation | depends on enclosure seal based on completely sealed enclosure |
|
| Breaking pressure | Approx. 10 mbar (4.0 in wc) Approx. 25 mbar (10.0 in wc) Approx. 30 mbar (12.1 in wc) Approx. 40 mbar (16.1 in wc) Approx. 50 mbar (20.1 in wc) |
|
| Directive conformity | ||
| Electromagnetic compatibility | ||
| Directive 2014/30/EU | EN 61326-1:2013 | |
| RoHS | ||
| Directive 2011/65/EU (RoHS) | EN 50581:2012 | |
| Ambient conditions | ||
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) | |
| Storage temperature | -20 ... 80 °C (-4 ... 176 °F) | |
| Relative humidity | 5 ... 95 %, noncondensing | |
| Vibration resistance | EN 60068-2-6 | |
| Impact resistance | EN 60068-2-27 | |
| Mechanical specifications | ||
| Material | 316L stainless steel (housing) | |
| Installation | -gravity dependent -air outlet, screen side must be facing down |
|
| Mass | 17 kg (37 lb) | |
| Data for application in connection with hazardous areas | ||
| Certificate | CML 19 ATEX 1425X | |
| Marking |  II2G Ex db eb ib [ib Gb][pxb Gb] IIC T4 Gb |
|
| Directive conformity | ||
| Directive 2014/34/EU | EN IEC 60079-0:2018 EN 60079-1:2014 EN 60079-2:2014 EN 60079-7:2015 EN 60079-11:2012 |
|
| International approvals | ||
| IECEx approval | IECEx CML 19.0156X Ex db eb ib [ib Gb][pxb Gb] IIC T4 Gb |
|
| General information | ||
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. Supplemental Standards : EN 61010-1:2010 |
|
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27180591 |
| ECLASS 12.0 | 27180591 |
| ECLASS 11.0 | 27180591 |
| ECLASS 10.0.1 | 27291390 |
| ECLASS 9.0 | 27291390 |
| ECLASS 8.0 | 27291390 |
| ECLASS 5.1 | 40050501 |
| ETIM 9.0 | EC000243 |
| ETIM 8.0 | EC000243 |
| ETIM 7.0 | EC000243 |
| ETIM 6.0 | EC000243 |
| ETIM 5.0 | EC000243 |
| UNSPSC 12.1 | 39121303 |
Details: EPV-6100-MP-*
Product Documentation: EPV-6100-MP-*
| Safety and Security Documentation | Idioma | Tipo de archivo | Tamaño |
|---|---|---|---|
| Manual | ENG | 6146 KB | |
| Manual de instrucciones | SPA | 167 KB | |
| Manuals | |||
| Product information R10x and R20x Series Standard Housings - All Sensing Modes / Produktinformation Serien R10x und R20x Alle Funktionsprinzipien - In Standardgehäusen | ALL | 459 KB | |
Approvals: EPV-6100-MP-*
| Certificates | Número de Certificado | Idioma | Tipo de archivo | Tamaño |
|---|---|---|---|---|
| Europe CML ATEX Certificate II 2 G | CML 19ATEX1425X | ALL | 118 KB | |
| IECEx Certificate of Conformity | IECEx CML 19.0156X | ALL | LINK | --- |
| UK-Type Examination Certificate | CML 21UKEX1380X | ALL | 127 KB | |
| Declaration of Conformity | ||||
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-B0D7B | ALL | 163 KB | |
| UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F) | DOC-B0F6 | ALL | 160 KB | |
Productos asociados: EPV-6100-MP-*
| Accessory of | ||||||
|---|---|---|---|---|---|---|
|
||||||
Pepperl+Fuchs SE
Lilienthalstraße 200
68307 Mannheim
Germany
info@de.pepperl-fuchs.com
+49 621 776-0
© 2024 Todos los derechos reservados
Pepperl + Fuchs es líder en el desarrollo y la fabricación de sensores electrónicos y componentes para el mercado de la automatización global. Su incesante innovación, calidad duradera y crecimiento constante garantizan el éxito continuado, desde hace más de 70 años. Pepperl + Fuchs emplea a 6.300 personas en todo el mundo y cuenta con fábricas en Alemania, EE.UU., Singapur, Hungría, Indonesia y Vietnam, la mayoría de ellas con certificado ISO 9001.