Línea de servicio de Sensores Industriales
Atención al cliente para protección contra explosiones
Switch Amplifier ED2-ST-Ex8
- 8-channel isolated barrier
- 24 V DC supply
- Dry contact or NAMUR inputs
- Active transistor output
- Fault indication output
- Line fault detection (LFD)
- Reversible mode of operation
- Configurable via PC
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Descargue la hoja de datos completa en PDF:
Extracto de la hoja de datos: Información técnica del ED2-ST-Ex8
| General specifications | ||
|---|---|---|
| Signal type | Digital Output | |
| Supply | ||
| Connection | d14+, z14- | |
| Rated voltage | 20 ... 30 V DC | |
| Ripple | ≤ 10 % | |
| Power consumption | approx. 1.2 W | |
| Input | ||
| Connection | channel 1: d2-, b2+ channel 2: d4-, b2+ channel 3: d6-, b4+ channel 4: d8-, b4+ channel 5: z2-, b6+ channel 6: z4-, b6+ channel 7: z6-, b8+ channel 8: z8-, b8+ |
|
| Rated values | acc. to EN 60947-5-6 (NAMUR), see manual for electrical data | |
| Open circuit voltage/short-circuit current | approx. 7.5 V DC / approx. 7.5 mA | |
| Switching point/switching hysteresis | 1.2 ... 2.1 mA / approx. 0.2 mA | |
| Line fault detection | breakage I ≤ 0.15 mA , short-circuit I > 6 mA | |
| Pulse length/pulse interval | ≥ 1 ms / ≥ 1 ms | |
| Output | ||
| Connection | channel 1: d24 channel 2: d28 channel 3: d32 channel 4: b24 channel 5: b28 channel 6: b32 channel 7: z24 channel 8: z28 |
|
| Switching current | max. 100 mA , short-circuit protected | |
| Output | signal ; electronic output, active | |
| Off-state current | ≤ 10 µA at blocked output | |
| Voltage drop | max. -3.5 V at 100 mA | |
| Fault indication output | ||
| Connection | z32 | |
| Output | fault signal ; electronic output, active | |
| Switching current | max. 100 mA , short-circuit protected | |
| Off-state current | ≤ 10 mA at blocked output | |
| Voltage drop | max. -3.5 V at 100 mA | |
| Transfer characteristics | ||
| Switching frequency | < 500 Hz | |
| Galvanic isolation | ||
| Output/power supply | basic insulation acc. to DIN EN 50178, rated insulation voltage of 50 Veff | |
| Directive conformity | ||
| Electromagnetic compatibility | ||
| Directive 2004/108/EC | The device has been used for the same applications for several years. It therefore features an appropriate electromagnetic field immunity. The device must not be used in new plants. | |
| Low voltage | ||
| Directive 2006/95/EC | EN 50178:1997 | |
| Conformity | ||
| Insulation coordination | EN 50178 | |
| Degree of protection | IEC 60529 | |
| Ambient conditions | ||
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) | |
| Mechanical specifications | ||
| Degree of protection | IP20 | |
| Connection | 48-pin plug connector acc. to DIN 41612 , series 2 , type F , z, b and d provided | |
| Mass | approx. 175 g | |
| Dimensions | 20 x 128 x 193 mm (0.8 x 5 x 7.6 inch) | |
| Height | 128 mm | |
| Width | 20 mm | |
| Length | 193 mm | |
| Construction type | Eurocard 100 x 160 mm (3.9 x 6.3 inch) acc. to DIN 41494, front panel 4TE, mountable in 19 inch rack | |
| Coding | a1/a7 | |
| Data for application in connection with hazardous areas | ||
| EU-type examination certificate | PTB 00 ATEX 2207 , for additional certificates see www.pepperl-fuchs.com | |
| Marking |  II (1)GD [EEx ia] IIC |
|
| Input | EEx ia IIC | |
| Voltage | 11.8 V | |
| Current | 14.6 mA | |
| Power | 43 mW (linear characteristic) | |
| Supply | ||
| Maximum safe voltage | 40 V (Attention! The rated voltage can be lower.) | |
| Output | ||
| Maximum safe voltage | 40 V (Attention! The rated voltage can be lower.) | |
| Interface | ||
| Maximum safe voltage | 60 V (Attention! The rated voltage can be lower.) | |
| Galvanic isolation | ||
| Input/Output | safe galvanic isolation acc. to EN 50020, voltage peak value 375 V | |
| Input/power supply | safe galvanic isolation acc. to EN 50020, voltage peak value 375 V | |
| Directive conformity | ||
| Directive 94/9/EC | EN 50014:1997, EN 50020:1994 | |
| General information | ||
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Accessories | ||
| Designation | - adapter with RS 232 interface - SOSA configuration software |
|
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27210121 |
| ECLASS 12.0 | 27210121 |
| ECLASS 11.0 | 27210121 |
| ECLASS 10.0.1 | 27210121 |
| ECLASS 9.0 | 27210121 |
| ECLASS 8.0 | 27210121 |
| ECLASS 5.1 | 27210121 |
| ETIM 9.0 | EC001485 |
| ETIM 8.0 | EC001485 |
| ETIM 7.0 | EC001485 |
| ETIM 6.0 | EC001485 |
| ETIM 5.0 | EC001485 |
| UNSPSC 12.1 | 32101514 |
Details: ED2-ST-Ex8
Product Documentation: ED2-ST-Ex8
| Manuals | Idioma | Tipo de archivo | Tamaño |
|---|---|---|---|
| Brief Instructions - E-system | ENG | 320 KB |
Software: ED2-ST-Ex8
| Software Tools | Liberar Info | Tipo de archivo | Tamaño |
|---|---|---|---|
| Adjustment aid for 8 channel isolated switch amplifier ED2-SR-EX8, ED2-ST-EX8 / Einstellhilfe für 8-Kanal-Trennschaltverstärker ED2-SR-EX8, ED2-ST-EX8 | 04/2002 | ZIP | 2927 KB |
Pepperl+Fuchs SE
Lilienthalstraße 200
68307 Mannheim
Germany
info@de.pepperl-fuchs.com
+49 621 776-0
© 2024 Todos los derechos reservados
Pepperl + Fuchs es líder en el desarrollo y la fabricación de sensores electrónicos y componentes para el mercado de la automatización global. Su incesante innovación, calidad duradera y crecimiento constante garantizan el éxito continuado, desde hace más de 70 años. Pepperl + Fuchs emplea a 6.300 personas en todo el mundo y cuenta con fábricas en Alemania, EE.UU., Singapur, Hungría, Indonesia y Vietnam, la mayoría de ellas con certificado ISO 9001.