OBD1400-R201-2EP-IO-0,3M-V1 Diffuse mode sensor

Key Benefits at a Glance

Medium design with versatile mounting options
Extended temperature range
-40 °C ... 60 °C
High degree of protection IP69K
IO-Link interface for service and process data

Please contact us for exact delivery estimation.125,94 EUR

Product photo: Diffuse mode sensor OBD1400-R201-2EP-IO-0,3M-V1

Dimensions: Diffuse mode sensor OBD1400-R201-2EP-IO-0,3M-V1

Connection Assignment: Diffuse mode sensor OBD1400-R201-2EP-IO-0,3M-V1

Note

All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

DE
EN
ES
FR

Datasheet Classification Design / Simulation Approvals Software Related Products

Technical data of OBD1400-R201-2EP-IO-0,3M-V1

Diffuse mode sensor

Detection range		2 ... 1400 mm
Detection range min.		100 ... 200 mm
Detection range max.		2 ... 1400 mm
Adjustment range		200 ... 1400 mm
Reference target		standard white, 100 mm x 100 mm
Light source		LED
Light type		modulated visible red light
LED risk group labelling		exempt group
Diameter of the light spot		approx. 50 mm at a distance of 1400 mm
Opening angle		2 °
Ambient light limit		EN 60947-5-2 : 60000 Lux

MTTF_d		724 a
Mission Time (T_M)		20 a
Diagnostic Coverage (DC)		0 %

Operation indicator		LED green: constantly on - power on flashing (4Hz) - short circuit flashing with short break (1 Hz) - IO-Link mode
Function indicator		LED yellow: constantly on - object detected constantly off - object not detected
Control elements		Light-on/dark-on changeover switch
Control elements		Sensing range adjuster

Operating voltage	U_B	10 ... 30 V DC
Ripple		max. 10 %
No-load supply current	I₀	< 18 mA at 24 V Operating voltage
Protection class		III

Interface type		IO-Link ( via C/Q = pin 4 )
IO-Link revision		1.1
Device profile		Identification and diagnosis Smart Sensor type 2.4
Device ID		0x111111 (1118481)
Transfer rate		COM2 (38.4 kBit/s)
Min. cycle time		2.3 ms
Process data width		Process data input 1 Bit Process data output 2 Bit
SIO mode support		yes
Compatible master port type		A

Switching type		The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally open / light-on, PNP normally closed / dark-on, IO-Link /Q - Pin2: NPN normally closed / dark-on, PNP normally open / light-on
Signal output		2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
Switching voltage		max. 30 V DC
Switching current		max. 100 mA , resistive load
Usage category		DC-12 and DC-13
Voltage drop	U_d	≤ 1.5 V DC
Switching frequency	f	1000 Hz
Response time		0.5 ms

Communication interface		IEC 61131-9
Product standard		EN 60947-5-2

UL approval		E87056 , cULus Listed , class 2 power supply , type rating 1
CCC approval		CCC approval / marking not required for products rated ≤36 V

Ambient temperature		-40 ... 60 °C (-40 ... 140 °F) , cable, fixed installation -20 ... 60 °C (-4 ... 140 °F) , movable cable not appropriate for conveyor chains
Storage temperature		-40 ... 70 °C (-40 ... 158 °F)

Degree of protection

IP67 / IP69 / IP69K

Connection

300 mm fixed cable with M12 x 1, 4-pin connector

Material

Housing		PC (Polycarbonate)
Optical face		PMMA

Mass

approx. 55 g

Dimensions

Height		61.7 mm
Width		15 mm
Depth		41.7 mm

Cable length

0.3 m

General Notes