FieldBarrier® for Cabinet Installation R4D0-FB-IA*

8 ... 12 outputs Ex ia IIC, FISCO and Entity
Advanced fault isolation and diagnostics at the spur
FieldBarrier in Zone 1/Div. 2
Instruments in Zone 0...1/Div. 1
For FOUNDATION Fieldbus H1 and PROFIBUS PA
Supports plug-in surge protectors
Very compact, small footprint
Designed for high reliability

Technical Data
Documents
CAD+CAE
Approvals+Certificates
Productos asociados

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Extracto de la hoja de datos: Información técnica del R4D0-FB-IA*

Descripción del producto
FieldConnex® FieldBarrier®

General specifications
Design / Mounting		Cabinet installation
Fieldbus connection
Power dissipation		see table 1
Main cable (Trunk)
	Rated voltage	16 ... 32 V DC , min. 15 V in case of brown out
	Rated current	trunk IN to trunk OUT max. 2 A see table 1
	Cable shield grounding option	Capacitive via 5.7 nF Direct
	Voltage drop	trunk IN to trunk OUT 100 mV max.
	Number of couplers	max. 3 per segment
	Reverse polarity protection	Built-In
Outputs
	Number of outputs	8, 10 or 12
	Number of devices per output	1
	Cable length	120 m
	Rated voltage	10 ... 14 V
	Rated current	max. 43 mA at one spur , max. 320 mA total current at all spurs
	Short-circuit current	53 mA , 1 mA in fallback state
	Cable shield grounding option	Capacitive via 4.4 nF
Surge protection		Trunk overvoltage protection if voltage exceeds typ. 39 V, max. 41 V
Diagnostic and Protection Features
Fault Isolation		Short Circuit Current Limitation at spurs Bounce Protection at spurs Signal inhibit at spurs
Physical Layer Diagnostic		Signal level at spurs Signal jitter at spurs Noise level at spurs
Indicators/operating means
Switch		S1 ON: diagnostic alarms activated S2 ON: diagnostic warnings activated S3-S8: not used
LED PWR		green: Fieldbus voltage > 16 V
LED COM/ERR		yellow flashing: fieldbus communication and physical layer status , red: Hardware error
LED SPURS		red: 2 Hz flashing in short-circuit condition
Galvanic isolation
Main wire/outputs		isolation is not affected by interference according to EN 60079-11, voltage peak value 375 V
Output/Output		No Isolation
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013
Standard conformity
Electromagnetic compatibility		NE 21:2011
Degree of protection		IEC/EN 60529
Fieldbus standard		IEC 61158-2
Climatic conditions		IEC 60721
Shock resistance		EN 60068-2-27
Vibration resistance		EN 60068-2-6
Ambient conditions
Ambient temperature		-40 ... 70 °C (-40 ... 158 °F)
Storage temperature		-40 ... 85 °C (-40 ... 185 °F)
Relative humidity		< 95 % non-condensing
Shock resistance		15 g 11 ms
Vibration resistance		1 g , 10 ... 150 Hz
Corrosion resistance		acc. to ISA-S71.04-1985, severity level G3
Mechanical specifications
Connection type		pluggable , screw terminal or spring terminal
Core cross section		see table 2
Housing material		Polycarbonate
Degree of protection		IP20 , IP30 for Ex-e terminal cover
Mass		2100 g
Dimensions		see dimensions
Mounting		DIN rail mounting and wall mounting
Data for application in connection with hazardous areas
EU-type examination certificate		BVS 13 ATEX E 121 X
	Marking	II 2(1)G Ex eb ib mb [ia Ga] IIC T4 Gb II (1)D [Ex ia Da] IIIC I (M1) [Ex ia Ma] I
Main cable (Trunk)
	Maximum safe voltage U_m	253 V AC
Outputs		in accordance to FISCO and Entity
	Power	1.063 W
	Voltage	17.1 V
	Current	248.55 mA
	Inductance	gas group IIC 470 µH , gas group IIB 2 mH
	Capacitance	gas group IIC 367 nF , gas group IIB 2.15 µF
Directive conformity
	Directive 2014/34/EU	EN IEC 60079-0:2018+AC:2020 , EN 60079-7:2015+A1:2018 , EN 60079-11:2012 , EN 60079-18:2015
International approvals
CSA approval		CSA 14.70004139
	Control drawing	116-0400
	Approved for	Class I, Division 2, Groups A, B, C, D T4 Class I, Zone 1, AEx/Ex e ib mb [ia Ga] IIC T4 Gb Class I, Zone 1, AEx/Ex e ib mb [ia IIC Da] IIC T4 Gb Associated equipment for Class I, Division 1 Groups A, B, C, D Associated equipment for Class II, Division 1 Groups E, F, G Associated equipment for Class III, Division 1
IECEx approval		IECEx BVS 13.0119X
	Approved for	Ex eb ib mb [ia Ga] IIC T4 Gb [Ex ia Da] IIIC [Ex ia Ma] I
Certificates and approvals
FOUNDATION Fieldbus		FF-846
General information
Supplementary information		EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com.

Classifications

System	Classcode
ECLASS 13.0	27242610
ECLASS 12.0	27242610
ECLASS 11.0	27242610
ECLASS 10.0.1	27242610
ECLASS 9.0	27242610
ECLASS 8.0	27242610
ECLASS 5.1	27242610
ETIM 9.0	EC001601
ETIM 8.0	EC001601
ETIM 7.0	EC001601
ETIM 6.0	EC001601
ETIM 5.0	EC001604
UNSPSC 12.1	39121008

Details: R4D0-FB-IA*

Datasheet: R4D0-FB-IA*

Datasheet	Tipo de archivo	Tamaño
Datasheet R4D0-FB-IA*	PDF	2027 KB
Datenblatt R4D0-FB-IA*	PDF	2028 KB

Documents: R4D0-FB-IA*

Manuals	Tipo de archivo	Tamaño
Manual	PDF	2866 KB
Handbuch	PDF	3532 KB
Instruction manuals
Инструкции	PDF	235 KB
Instruction manual / Betriebsanleitung	PDF	340 KB
Návod k poużití	PDF	230 KB
Instruktions manual	PDF	229 KB
Instruction manual	PDF	235 KB
Kasutusjuhend	PDF	225 KB
Käyttöohje	PDF	225 KB
Manuel d'instructions	PDF	232 KB
Betriebsanleitung	PDF	235 KB
Οδηγίες χρήσης	PDF	240 KB
Handleiding	PDF	229 KB
Instruction manual / Betriebsanleitung	PDF	228 KB
Használati útmutató	PDF	230 KB
Manuale di istruzioni	PDF	229 KB
Lietošanas pamācība	PDF	228 KB
Instrukciju vadovas	PDF	230 KB
Instrukcja obsługi	PDF	231 KB
Manual de instruções	PDF	231 KB
Manual de utilizare	PDF	229 KB
Návod na poużitie	PDF	229 KB
Navodila za uporabo	PDF	227 KB
Manual de instrucciones	PDF	230 KB
Manual	PDF	227 KB
Application reports
Application Report - Controlling and Monitoring liquid Helium at the Deutsches Elektronen-Synchrotron	PDF	361 KB
Application Report - Digital Communication in Steel-Plate Manufacturing	PDF	470 KB
Applikationsbericht - Digitale Kommunikation in der Produktion von Grobblechen	PDF	473 KB
Applikationsbericht - Steuerung und Überwachung der Kälteanlagen im Deutschen Elektronen-Synchrotron	PDF	643 KB

CAD+CAE: R4D0-FB-IA*

CAD	Tipo de archivo	Tamaño
CAD 2-D / CAD 2-D	ZIP	1304 KB

Approvals+Certificates: R4D0-FB-IA*

Certificates	Tipo de archivo	Tamaño
BVS IECEx Certificate of Conformity	LINK	---
Brasil TUV Rheinland Brazil	PDF	1182 KB
Canada, USA CSA Certificate of Compliance	PDF	323 KB
China NEPSI	PDF	1853 KB
China SITIIAS CCC Ex Certificate	PDF	1013 KB
DNV Marine	PDF	100 KB
Europe BVS ATEX Category 2 (1)	PDF	1469 KB
South Africa MASC	PDF	630 KB
United Kingdom CML UK-Type Examination Certificate UKEX Category (1) D UKEX Category (1) G UKEX Category (M1)	PDF	181 KB
Worldwide Fieldbus Foundation	PDF	55 KB
Control Drawings
Control drawing CSA / Control drawing CSA	PDF	343 KB
Declaration of Conformity
EU Declaration of Conformity (P+F)	PDF	1147 KB
EU Declaration of Conformity (P+F)	PDF	1141 KB
EU Declaration of Conformity (P+F)	PDF	1139 KB
EU Declaration of Conformity (P+F)	PDF	1142 KB
EU Declaration of Conformity (P+F)	PDF	1138 KB
EU Declaration of Conformity (P+F)	PDF	1139 KB
EU Declaration of Conformity (P+F)	PDF	1140 KB
EU-Konformitäterklärung (P+F)	PDF	1142 KB
EU Declaration of Conformity (P+F)	PDF	1147 KB
EU Declaration of Conformity (P+F)	PDF	1139 KB
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	PDF	1139 KB
EU Declaration of Conformity (P+F)	PDF	1141 KB
EU Declaration of Conformity (P+F)	PDF	1139 KB
EU Declaration of Conformity (P+F)	PDF	1139 KB
EU Declaration of Conformity (P+F)	PDF	1141 KB
EU Declaration of Conformity (P+F)	PDF	1142 KB
EU Declaration of Conformity (P+F)	PDF	1141 KB
EU Declaration of Conformity (P+F)	PDF	1140 KB
EU Declaration of Conformity (P+F)	PDF	1142 KB
EU Declaration of Conformity (P+F)	PDF	1138 KB
EU Declaration of Conformity (P+F)	PDF	1139 KB
EU Declaration of Conformity (P+F)	PDF	1139 KB
EU Declaration of Conformity (P+F)	PDF	1140 KB

Productos asociados: R4D0-FB-IA*

Matching System Components

	F.FB1.T14.**.1..*..*** FieldBarrier Junction Box
	FieldBarrier Junction Box, Brushed Stainless Steel, 8, 10, 12 outputs Ex ia, Brushed enclosure, IP66, Configurable cable entries for trunk and spurs, Packaged certified solution, For FOUNDATION Fieldbus H1 and PROFIBUS PA, Device coupler location: Zone 2 - high-power trunk Zone 1 - high-power trunk, Device coupler location [2]: Zone 1 - high-power trunk, Instrument location / spur protection: Zone 0 ... 1 - intrinsic safety, Function: Device coupler, Design / Mounting: Outside installationpa

	F.FB1.P14.A*.1..*..*** FieldBarrier Junction Box, Polyester (GRP)
	8, 10, 12 outputs Ex ia, Impact resistance enclosure, IP66, Configurable cable entries for trunk and spurs, Packaged certified solution, For FOUNDATION Fieldbus H1 and PROFIBUS PA, Device coupler location: Zone 2 - high-power trunk Zone 1 - high-power trunk, Device coupler location [2]: Zone 1 - high-power trunk, Instrument location / spur protection: Zone 0 ... 1 - intrinsic safety, Function: Device coupler, Design / Mounting: Outside installationpa

Accessories

	MFT-BASE.4P Multifunction Terminal
	pa

	F*-LBF-D1.32 Fieldbus Surge Protector, Field Mounting (Ex d)
	Surge Protector in stainless steel housing, Flameproof enclosure (Ex d) protection, Surge protection for '+' and '-' fieldbus lead, Choice of threads 20 mm or 1/2" NPT, For FOUNDATION Fieldbus H1 and PROFIBUS PA, IECEx approval, Europe, Device coupler location: non-explosion hazardous area Zone 2 - high-power trunk Zone 1 - high-power trunk, Device coupler location [2]: Zone 2 - high-power trunk, Device coupler location [3]: Zone 1 - high-power trunkpa

	SCP-LBF-IA1.36.IE* Fieldbus Surge Protector, Field Installation on Spur
	Pluggable, mounts between device coupler and spur cable, Intrinsically safe (Ex ia), FISCO, Entity, DART Fieldbus, or general-purpose, Optional diagnostics for wear, Grounding of shield via gas-discharge tube, For FOUNDATION Fieldbus H1 and PROFIBUS PA, IECEx approval, Europe, USA, Canada, Device coupler location: non-explosion hazardous area Zone 2 - high-power trunk Zone 1 - high-power trunk Division 2 - high-power trunk Division 1 - high-power trunkpa

	ELS-1 Enclosure Leakage Sensor
	Enlcosure leakage sensor for operation with FOUNDATION Fieldbus and PROFIBUS PA, Indication via LED and Advanced Diagnostics, Intrinsically safe, FISCO or Entity, For instrument or device coupler, Fits inside terminal compartment, For FOUNDATION Fieldbus H1 and PROFIBUS PA, IECEx approval, Europe, USA, Device coupler location: non-explosion hazardous area Zone 2 - high-power trunk Zone 1 - high-power trunk Division 2 - high-power trunk Division 1 - high-power trunkpa

	MFT-2L.1600 Multifunction Terminal
	Suitable for fusing solenoids, alarm indicators, sounders etc, and diode decoupling of power supplies, Simple OR gate for zone 1 mounting, visible separation for field devices, relay switches , Bus termination, Current limiting, DIN rail mounting, Maintenance without hot work permit, Wires can be disconnected during operation once the module has been removed (parts under voltage remain covered)pa

Notas generales sobre la información de los productos de Pepperl+Fuchs

Enlaces directos

Productos

Tecnología de bus de campo para zona segura o cualquier área peligrosa

Productos

Enlaces

Fieldbus Foundation

Pepperl+Fuchs SE
Lilienthalstraße 200
68307 Mannheim
Germany
info@de.pepperl-fuchs.com
phone +49 621 776-0

Pepperl + Fuchs es líder en el desarrollo y la fabricación de sensores electrónicos y componentes para el mercado de la automatización global. Su incesante innovación, calidad duradera y crecimiento constante garantizan el éxito continuado, desde hace más de 70 años. Pepperl + Fuchs emplea a 6.300 personas en todo el mundo y cuenta con fábricas en Alemania, EE.UU., Singapur, Hungría, Indonesia y Vietnam, la mayoría de ellas con certificado ISO 9001.