UC2000-L2M-U-T-V15-Y70137859 Ultrasonic sensor

Key Benefits at a Glance

Extended temperature range
Sensor head bidirectional and rotatable
Rugged metal base
Function indicators visible from all directions
Selectable sound lobe width
Programmable
Customer-specific configuration

Product photo: Ultrasonic sensor UC2000-L2M-U-T-V15-Y70137859

Dimensions: Ultrasonic sensor UC2000-L2M-U-T-V15-Y70137859

Connection Assignment: Ultrasonic sensor UC2000-L2M-U-T-V15-Y70137859

Note

All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

DE

DE
EN
ES
FR

Datasheet Classification Product Documentation Approvals Software Related Products

Technical data of UC2000-L2M-U-T-V15-Y70137859

Single head system

Sensing range		60 ... 2000 mm
Adjustment range		80 ... 2000 mm
Dead band		0 ... 60 mm
Standard target plate		100 mm x 100 mm
Transducer frequency		approx. 175 kHz

Response delay		minimum: 60 ms factory setting: 330 ms
Time delay before availability	t_v	≤ 1600 ms

LED green		Operating display
LED yellow		object in evaluation range
LED red		error

Operating voltage	U_B	12 ... 30 V DC , ripple 10 %_SS
No-load supply current	I₀	≤ 50 mA

Interface type

Serial interface (programming adapter required)
9600 BPS, no parity, 8 data bits, 1 stop bit

Input/output type

1 synchronization connection, bidirectional

0 Level		0 ... 1 V
1 Level		4 V ... U_B
Input impedance		> 12 kΩ
Output current		< 12 mA
Pulse length		0.5 ... 300 ms (level 1)
Pulse interval		≥ 33 ms (level 0)

Synchronization frequency

Common mode operation		≤ 30 Hz
Multiplex operation		≤ 33 Hz / n , n = number of sensors , n ≤ 10 (factory setting: n = 5 )

Input type		1 program input
Level (evaluation limit 1)		0 ... 1 V
Level (evaluation limit 2)		4 V ... U_B
Input impedance		> 12 kΩ
Pulse length		2 ... 10 s

Output type		1 analog output 0 ... 10 V
Resolution		evaluation range [mm]/4000, but ≥ 0.4 mm
Deviation of the characteristic curve		≤ 0.2 % of full-scale value
Repeat accuracy		≤ 0.1 % of full-scale value
Load impedance		≥ 500 Ohm
Temperature influence		≤ 1.5 % of full-scale value

Standard conformity

Standards

EN IEC 60947-5-2:2020
IEC 60947-5-2:2019
EN 60947-5-7:2003
IEC 60947-5-7:2003

UL approval		cULus Listed, General Purpose
CCC approval		CCC approval / marking not required for products rated ≤36 V

Ambient temperature		-40 ... 70 °C (-40 ... 158 °F)
Storage temperature		-40 ... 85 °C (-40 ... 185 °F)

Connection type

Connector plug M12 x 1 , 5-pin

Degree of protection

IP67

Material

Housing		PA-GF35
Transducer		epoxy resin/hollow glass sphere mixture; polyurethane foam

Mass

175 g

Dimensions

Height		40 mm
Width		40 mm
Length		40 mm

Output		near limit: 60 mm far limit: 4000 mm Output mode: rising ramp
Beam width		wide
Evaluation procedure		averaging (MxN) M = 5 N = 2 fault: 0 V

Supplementary information

Switch settings of the external programming adapter:
"output load": pull-down
"output logic": noninv

General Notes

Related News and Applications

Read more on news and applications related to this product.

ultrasonic sensors ensure the safe operation of excavators on uncertain terrain and with restricted field of view

Avoid Collisions Reliably and Safely

Excavators must operate safely in all directions, also on uncertain terrain. Ultrasonic sensors ensure that collisions are avoided at all times and monitor areas with a restricted field of view.

More information