UC2000-L2-E5-V15-Y291515 Ultrasonic sensor

Key Benefits at a Glance

Sensor head bidirectional and rotatable
Function indicators visible from all directions
Selectable sound lobe width
Programmable
Rugged metal base
Temperature range -40 ... 158 °F (-40°C to 70°C)

Product photo: Ultrasonic sensor UC2000-L2-E5-V15-Y291515

Dimensions: Ultrasonic sensor UC2000-L2-E5-V15-Y291515

Connection Assignment: Ultrasonic sensor UC2000-L2-E5-V15-Y291515

Note

All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

DE

DE
EN
ES
FR

Datasheet Classification Product Documentation Approvals Software Related Products

Technical data of UC2000-L2-E5-V15-Y291515

Single head system

Sensing range		60 ... 2000 mm
Adjustment range		80 ... 2000 mm
Dead band		0 ... 60 mm
Standard target plate		100 mm x 100 mm
Transducer frequency		approx. 175 kHz

Response delay		≤ 100 ms
Time delay before availability	t_v	≤ 1600 ms

LED green		Operating display
LED yellow		switching state
LED red		error

Operating voltage	U_B	10 ... 30 V DC , ripple 10 %_SS
No-load supply current	I₀	≤ 50 mA

Interface type

Serial interface (programming adapter required)
9600 BPS, no parity, 8 data bits, 1 stop bit

Input/output type

1 synchronization connection, bidirectional

0 Level		0 ... 1 V
1 Level		4 V ... U_B
Input impedance		> 12 kΩ
Output current		< 12 mA
Pulse length		0.5 ... 300 ms (level 1)
Pulse interval		≥ 33 ms (level 0)

Synchronization frequency

Common mode operation		≤ 30 Hz
Multiplex operation		≤ 33 Hz / n , n = number of sensors , n ≤ 10 (factory setting: n = 5 )

Input type		1 program input
Level (switch point 1)		0 ... 1 V
Level (switch point 2)		4 V ... U_B
Input impedance		> 10 kΩ
Pulse length		2 ... 10 s

Output type		1 switching output E5, PNP NO/NC, programmable
Rated operating current	I_e	200 mA , short-circuit/overload protected
Voltage drop	U_d	≤ 2 V
Repeat accuracy		≤ 0.1 % of full-scale value
Switching frequency	f	≤ 5 Hz
Range hysteresis	H	programmable , preset to 1 mm
Temperature influence		< 1.5 % of full-scale value

Standard conformity

Standards

EN IEC 60947-5-2:2020
IEC 60947-5-2:2019

UL approval		cULus Listed, Class 2 Power Source
CCC approval		CCC approval / marking not required for products rated ≤36 V

Ambient temperature		-40 ... 70 °C (-40 ... 158 °F)
Storage temperature		-40 ... 85 °C (-40 ... 185 °F)

Connection type

Connector plug M12 x 1 , 5-pin

Degree of protection

IP67

Material

Housing		PA-GF35
Transducer		epoxy resin/hollow glass sphere mixture; polyurethane foam

Mass

115 g

Dimensions

Height		40 mm
Width		40 mm
Length		40 mm

Output		near switch point: 80 mm far switch point: 2000 mm output function: Window mode output behavior: NO contact
Beam width		wide

Supplementary information

Switch settings of the external programming adapter:
"output load": pull-down
"output logic": inv

General Notes

Related News and Applications

Read more on news and applications related to this product.

ultrasonic sensors ensure the safe operation of excavators on uncertain terrain and with restricted field of view

Avoid Collisions Reliably and Safely

Excavators must operate safely in all directions, also on uncertain terrain. Ultrasonic sensors ensure that collisions are avoided at all times and monitor areas with a restricted field of view.

More information