Selecione seu país
UDCM-30GM-085-3E3 Double Plate Sensor
Principais benefícios
- Ultrasonic system for reliable detection of no, one, or two overlapping sheet materials, preferably sheet metal
- No teach-in required
- Insensitive to printing, colors, and shining surfaces
- Programmable









Nota
Todos os documentos relacionados ao produto, como certificados, declarações de conformidade etc., que foram emitidos antes da conversão sob o nome Pepperl+Fuchs GmbH ou Pepperl+Fuchs AG, também se aplicam à Pepperl+Fuchs SE.
EN
- EN
- DE
- ES
- FR
- JA
- ZH
Dados técnicos de UDCM-30GM-085-3E3
| Sensing range | 50 ... 150 mm , optimal distance: 80 mm | |
| Transducer frequency | 85 kHz |
| LED green | indication: single sheet metal detected | |
| LED yellow | Indication: No sheet metal detected (Air) | |
| LED red | indication: double sheet metal detected |
| Operating voltage | UB | 18 ... 30 V DC , ripple 10 %SS |
| No-load supply current | I0 | < 200 mA |
| Time delay before availability | tv | < 500 ms |
| Input type | Function input 0-level: -UB ... -UB + 1V 1-level: +UB - 1 V ... +UB | |
| Pulse length | ≥ 100 ms | |
| Function | in normal operation mode, the function input has to be connected with UB+ or UB- | |
| Impedance | ≥ 4 kΩ |
| Output type | 3 switch outputs PNP, NC | |
| Rated operating current | Ie | 3 x 100 mA , short-circuit/overload protected |
| Voltage drop | Ud | ≤ 3 V |
| Switch-on delay | ton | approx. 30 ms |
| Switch-off delay | toff | approx. 30 ms |
| Pulse extension | min. 120 ms programmable |
| Standard conformity | |||||
| |||||
| UL approval | cULus Listed, General Purpose, Class 2 Power Source | |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Ambient temperature | 0 ... 50 °C (32 ... 122 °F) | |
| Storage temperature | -40 ... 70 °C (-40 ... 158 °F) |
| Connection type | cable PVC , 2 m | |||||||
| Core cross section | 0.14 mm2 | |||||||
| Degree of protection | IP65 | |||||||
| Material | ||||||||
| ||||||||
| Mass | 300 g | |||||||
| Dimensions | ||||||||
| ||||||||
| Supplementary information | Switch settings of the external programming adapter: "output load": pull-down "output logic": inv |
Páginas relacionadas
Está procurando mais informações? Fique à vontade para aprender mais sobre nossas páginas relacionadas.