OBE12M-R100-S2EP-IO-0,3M-V1 Thru-beam sensor (pair)

Principais benefícios

Miniature design with versatile mounting options
IO-Link interface for service and process data
Various frequencies for avoiding mutual interference (cross-talk immunity)
Extended temperature range
-40 °C ... 60 °C
High degree of protection IP69K

Mostrar mais

Product photo: Thru-beam sensor (pair) OBE12M-R100-S2EP-IO-0,3M-V1

Connection Assignment: Thru-beam sensor (pair) OBE12M-R100-S2EP-IO-0,3M-V1

Dimensions: Thru-beam sensor (pair) OBE12M-R100-S2EP-IO-0,3M-V1

Nota

Todos os documentos relacionados ao produto, como certificados, declarações de conformidade etc., que foram emitidos antes da conversão sob o nome Pepperl+Fuchs GmbH ou Pepperl+Fuchs AG, também se aplicam à Pepperl+Fuchs SE.

DE

DE
EN
ES
FR
IT

Folha de dados Classificação Design / Simulation Certificações Software Produtos relacionados

Dados técnicos de OBE12M-R100-S2EP-IO-0,3M-V1

Emitter		OBE12M-R100-S-IO-0,3M-V1
Receiver		OBE12M-R100-2EP-IO-0,3M-V1

Effective detection range		0 ... 12 m
Threshold detection range		15 m
Light source		LED
Light type		modulated visible red light
LED risk group labelling		exempt group
Diameter of the light spot		approx. 65 mm at a distance of 1 m
Opening angle		3.7 °
Ambient light limit		EN 60947-5-2 : 30000 Lux

MTTF_d		462 a
Mission Time (T_M)		20 a
Diagnostic Coverage (DC)		0 %

Operation indicator		LED green: constantly on - power on flashing (4Hz) - short circuit flashing with short break (1 Hz) - IO-Link mode
Function indicator		Yellow LED: Permanently lit - light path clear Permanently off - object detected Flashing (4 Hz) - insufficient operating reserve
Control elements		Receiver: light/dark switch
Control elements		Receiver: sensitivity adjustment
Parameterization indicator		IO link communication: green LED goes out briefly (1 Hz)

Operating voltage	U_B	10 ... 30 V DC
Ripple		max. 10 %
No-load supply current	I₀	Emitter: ≤ 14 mA Receiver: ≤ 13 mA at 24 V supply voltage
Protection class		III

Interface type		IO-Link ( via C/Q = pin 4 )
IO-Link revision		1.1
Device ID		Emitter: 0x110401 (1115137) Receiver: 0x110301 (1114881)
Transfer rate		COM2 (38.4 kBit/s)
Min. cycle time		2.3 ms
Process data width		Emitter: Process data output: 2 Bit Receiver: Process data input: 2 Bit Process data output: 2 Bit
SIO mode support		yes
Compatible master port type		A

Test input

emitter deactivation at +U_B

Switching type		The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally open / dark-on, PNP normally closed / light-on, IO-Link /Q - Pin2: NPN normally closed / light-on, PNP normally open / dark-on
Signal output		2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
Switching voltage		max. 30 V DC
Switching current		max. 100 mA , resistive load
Usage category		DC-12 and DC-13
Voltage drop	U_d	≤ 1.5 V DC
Switching frequency	f	1000 Hz
Response time		0.5 ms

Communication interface		IEC 61131-9
Product standard		EN 60947-5-2

UL approval

E87056 , cULus Listed , class 2 power supply , type rating 1

Ambient temperature		-40 ... 60 °C (-40 ... 140 °F) , cable, fixed installation -25 ... 60 °C (-13 ... 140 °F) , movable cable not appropriate for conveyor chains
Storage temperature		-40 ... 70 °C (-40 ... 158 °F)