ﾌｧｸﾄﾘｰｵｰﾄﾒｰｼｮﾝ(FA)
ﾌｫｰﾑからお問い合わせ(FA)
ﾌﾟﾛｾｽｵｰﾄﾒｰｼｮﾝ(PA)
ﾌｫｰﾑからお問い合わせ(PA)
Not available for purchase
Not available for purchase

Vibration Limit Switch LVL-M3

LVL-M3
  • Vibration limit switch for liquids
  • Large selection of process connections: universal use
  • Wide variety of electronic modules (e. g., relay, thyristor signal output): the right connection for every process control system
  • No calibration: quick and low-cost start up
  • No mechanically moving parts: maintenance-free, no wear, long operating life
  • Operation via push buttons and DIP switches on the electronic insert

注: Pepperl+Fuchs GmbH(旧社名)で発行された証明書・適合宣言書などすべての製品関連文書は、Pepperl+Fuchs AG(新社名)にそのまま適用されます。

技術データ  LVL-M3

General specifications
Function principlepoint level detection, maximum or minimum detection for liquids
Measuring methodThe change in vibration frequency causes the device to switch.
Construction typecompact device
device with short tube
device with tube extension
SeriesVibracon LVL-M3
Housingsingle compartment, aluminum, coated
single compartment, plastic
Supply
Rated voltageelectronic insert FEL42: 10 V DC ... 55 V DC
electronic insert FEL44: 19 V AC ... 253 V AC/19 V DC ... 55 V DC
electronic insert FEL48: switch amplifier acc. to IEC 60947-5-6 (NAMUR)
Current consumptionelectronic insert FEL42: ≤ 10 mA, without load
Power consumptionelectronic insert FEL42: ≤ 0,5 W
electronic insert FEL44: ≤ 25 VA/< 1.3 W
electronic insert FEL48: acc. to IEC 60947-5-6 (NAMUR)
Input
Switching pointsee section switch point
Measured variablelimit level (limit value)
Measurement rangedepends on installation location and the tube extension
maxmum sensor length : 2 m
Output
Output typeelectronic insert FEL42: 3-wire PNP
electronic insert FEL44: relay DPDT
electronic insert FEL48: 2-wire NAMUR
Switch behaviourswitch-over for minimum/maximum residual current safety on electronic insert
MAX = maximum safety:
The output switches to the power fail response when the fork is covered.
for use with overspill protection for example
MIN = minimum safety:
The output switches to the power fail response when the fork is exposed.
for use with dry running protection for example
Directive conformity
Electromagnetic compatibility
Directive 2014/30/EUEN 61326
Low voltage
Directive 2014/35/EUEN 61010-1
Conformity
Electromagnetic compatibilityNE 21
Degree of protectionIEC 60529 , NEMA 250
Shock resistanceIEC 60068-2-27
Vibration resistanceEN 60068-2-64
Climate classIEC 60068-2-38 test Z/AD
Corrosion resistanceacc. to ISA-71.04, severity level G3
Input characteristics
Medium densityadjustment on the electronic insert > 0,5 g/cm3 or > 0,7 g/cm3 (other on request)
Measurement accuracy
Reference operating conditionsambient temperature: 23 °C (73 °F)
process temperature: 23 °C (73 °F)
density: 1 g/cm3 (water)
medium viscosity: 1 mPa·s
process pressure: ambietn pressure/unpressurized
sensor installation: verticaly from above
density selection switch: > 0.7 g/cm3
switch direction of sensor: uncovered to covered
Maximum measured errormax. ± 1 mm
Hysteresistyp. 2.5 mm
Influence of medium densitysee technical information (TI)
Influence of medium temperaturemax. +1.4 ... -2.8 mm (-40 ... 150 °C (-40 ... 302 °F))
Influence of medium pressuremax. 0 ... 2.6 mm (-1 ... 40 bar)
Operating conditions
Installation conditions
Installation positionany position
Process conditions
Medium temperature-40 ... 150 °C (-40 ... 302 °F)
Medium pressurepe = -1 ... 40 bar (-14.5 ... 580.2 psi) over the entire temperature range , exceptions see process connections
Test pressurePN = 40 bar (580 psi): test pressure = 1.5 x PN max. 60 bar (870 psi) dependent on the process connection selected
Thermal shock resistance≤ 120 K/s
State of aggregationliquid
Densitymin. 0.5 g/cm3 , optional 0.4 g/cm3
Viscositymax. 10000 mm2/s (max. 10000 cSt)
Ambient conditions
Ambient temperature-40 ... 70 °C (-40 ... 158 °F)
For further information see technical information (TI).
Storage temperature-40 ... 80 °C (-40 ... 176 °F)
Altitude≤ 2000 m above MSL
Mechanical specifications
Degree of protectionplug M12 : IP66/67, NEMA type 4X
Others : IP66/68, NEMA type 4X/6P
Connectiongland M20
thread M20 , G1/2 , NPT1/2 , NPT3/4
plug M12
Materialsee technical information (TI)
Surface qualityRa < 3.2 µm/126 µinch
Massbasic weight: 0.65 kg
the basic weight comprises:
- sensor (compact)
- electronic insert
- housing: single compartment, plastic with cover
- process connection: thread, G3/4
in addition to the basic weight:
- housing: single compartment, aluminum, coated: 0.8 kg
- pipe extension: 1000 mm: 0.9 kg, 100 inch: 2.3 kg
- plastic protective cover: 0.2 kg
For further information see technical information (TI).
Dimensionshousing: diameter max. 101 mm, heigth max. 118 mm
compact version: length depends on process connection
short tube version: length 99 ... 118 mm, depends on process connection
tube extension: length 117 ... 2000 mm
tuning fork: width 17.2 mm, fork width 10 mm, length 40 mm
For further information see technical information (TI).
Process connectioncylindrical threads G3/4, G1 acc. to DIN ISO 228 G for installing in weld-in adapter
cylindrical threads G3/4, G1 acc. to DIN ISO 228 G with flat seal
conical threads NPT3/4, NPT1 acc. to ANSI B 1.20.3
conical threads R3/4, R1 acc. to EN 10226
flanges RF, RJF, FF from 1 inch acc. to ASME B16.5
flanges form A, B1, C, D, E from DN25 acc. to EN 1092-1
flanges RF from 10K 25A acc. to JIS B2220
Tri-Clamp from DN25 acc. to ISO 2852
For further information see technical information (TI).
Data for application in connection with hazardous areas
EU-type examination certificatesee instruction manuals (SI)
International approvals
CSA approvalsee instruction manuals (SI)
IECEx approvalsee instruction manuals (SI)
Indication and operation
Display elementswithout display
Control elementsswitches on the electronic insert
Function testvia switches on the electronic insert
Certificates and approvals
Overspill protectionsee approval (ZE)
General information
Supplementary documentationtechnical information (TI)
manuals, brief instructions (BA, KA)
instruction manuals (SI)
Special documentation (SD)
Supplementary informationObserve the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
Accessories
Designationsee technical information (TI)

Classifications

SystemClasscode
ECLASS 13.027200518
ECLASS 12.027200518
ECLASS 11.027200518
ECLASS 10.0.127200518
ECLASS 9.027200589
ECLASS 8.027200589
ECLASS 5.127200589
ETIM 9.0EC001447
ETIM 8.0EC001447
ETIM 7.0EC001447
ETIM 6.0EC001447
ETIM 5.0EC001447
UNSPSC 12.141111950

Details: LVL-M3

Datasheet: LVL-M3

Datasheetファイルタイプファイルサイズ
Datasheet LVL-M3PDF756 KB
Datenblatt LVL-M3PDF758 KB

Documents: LVL-M3

Manualsファイルタイプファイルサイズ
ManualPDF2713 KB
HandbuchPDF2723 KB
Instruction manuals
ИнструкцииPDF175 KB
ИнструкцииPDF173 KB
ИнструкцииPDF176 KB
ИнструкцииPDF174 KB
ИнструкцииPDF177 KB
Instruction manual / BetriebsanleitungPDF360 KB
Instruction manual / BetriebsanleitungPDF353 KB
Instruction manual / BetriebsanleitungPDF354 KB
Instruction manual / BetriebsanleitungPDF358 KB
Instruction manual / BetriebsanleitungPDF353 KB
Návod k poużitíPDF170 KB
Návod k poużitíPDF168 KB
Návod k poużitíPDF169 KB
Návod k poużitíPDF172 KB
Návod k poużitíPDF168 KB
Instruktions manualPDF166 KB
Instruktions manualPDF167 KB
Instruktions manualPDF166 KB
Instruktions manualPDF169 KB
Instruktions manualPDF169 KB
Instruction manual for CC approvalPDF171 KB
Instruction manual for CH approvalPDF172 KB
Instruction manual for CX approvalPDF171 KB
Instruction manual for E2 approvalPDF174 KB
Instruction manual for E3 approvalPDF173 KB
KasutusjuhendPDF165 KB
KasutusjuhendPDF166 KB
KasutusjuhendPDF164 KB
KasutusjuhendPDF163 KB
KasutusjuhendPDF162 KB
KäyttöohjePDF165 KB
KäyttöohjePDF163 KB
KäyttöohjePDF163 KB
KäyttöohjePDF162 KB
KäyttöohjePDF165 KB
Manuel d'instructionsPDF172 KB
Manuel d'instructionsPDF173 KB
Manuel d'instructionsPDF170 KB
Manuel d'instructionsPDF170 KB
Manuel d'instructionsPDF174 KB
Betriebsanleitung für Zulassung CCPDF173 KB
Betriebsanleitung für Zulassung CHPDF173 KB
Betriebsanleitung für Zulassung CXPDF173 KB
Betriebsanleitung für Zulassung E2PDF176 KB
Betriebsanleitung für Zulassung E3PDF175 KB
Οδηγίες χρήσηςPDF181 KB
Οδηγίες χρήσηςPDF176 KB
Οδηγίες χρήσηςPDF180 KB
Οδηγίες χρήσηςPDF179 KB
Οδηγίες χρήσηςPDF177 KB
HandleidingPDF168 KB
HandleidingPDF171 KB
HandleidingPDF169 KB
HandleidingPDF168 KB
HandleidingPDF171 KB
Instruction manual / BetriebsanleitungPDF170 KB
Instruction manual / BetriebsanleitungPDF168 KB
Instruction manual / BetriebsanleitungPDF168 KB
Instruction manual / BetriebsanleitungPDF166 KB
Instruction manual / BetriebsanleitungPDF166 KB
Használati útmutatóPDF168 KB
Használati útmutatóPDF168 KB
Használati útmutatóPDF170 KB
Használati útmutatóPDF168 KB
Használati útmutatóPDF171 KB
Manuale di istruzioniPDF169 KB
Manuale di istruzioniPDF168 KB
Manuale di istruzioniPDF166 KB
Manuale di istruzioniPDF170 KB
Manuale di istruzioniPDF167 KB
Lietošanas pamācībaPDF168 KB
Lietošanas pamācībaPDF170 KB
Lietošanas pamācībaPDF167 KB
Lietošanas pamācībaPDF169 KB
Lietošanas pamācībaPDF166 KB
Instrukciju vadovasPDF167 KB
Instrukciju vadovasPDF169 KB
Instrukciju vadovasPDF172 KB
Instrukciju vadovasPDF168 KB
Instrukciju vadovasPDF171 KB
Instrukcja obsługiPDF169 KB
Instrukcja obsługiPDF171 KB
Instrukcja obsługiPDF173 KB
Instrukcja obsługiPDF171 KB
Instrukcja obsługiPDF169 KB
Manual de instruçõesPDF171 KB
Manual de instruçõesPDF172 KB
Manual de instruçõesPDF169 KB
Manual de instruçõesPDF168 KB
Manual de instruçõesPDF168 KB
Manual de utilizarePDF171 KB
Manual de utilizarePDF168 KB
Manual de utilizarePDF169 KB
Manual de utilizarePDF168 KB
Manual de utilizarePDF171 KB
Návod na poużitiePDF171 KB
Návod na poużitiePDF170 KB
Návod na poużitiePDF168 KB
Návod na poużitiePDF168 KB
Návod na poużitiePDF172 KB
Navodila za uporaboPDF168 KB
Navodila za uporaboPDF166 KB
Navodila za uporaboPDF165 KB
Navodila za uporaboPDF167 KB
Navodila za uporaboPDF164 KB
Manual de instruccionesPDF172 KB
Manual de instruccionesPDF168 KB
Manual de instruccionesPDF171 KB
Manual de instruccionesPDF169 KB
Manual de instruccionesPDF168 KB
ManualPDF165 KB
ManualPDF167 KB
ManualPDF166 KB
ManualPDF165 KB
ManualPDF168 KB
Specific Operating Instructions
Temperature tables for CC approvalPDF2001 KB
Temperature tables for CH approvalPDF1984 KB
Temperature tables for CX approvalPDF2006 KB
Temperature tables for E2 approvalPDF1986 KB
Temperature tables for E3 approvalPDF2007 KB
Short instructions, safety information
Brief instructionsPDF2483 KB
KurzanleitungPDF2491 KB
Technical information
Contamination declaration / KontaminationserklärungPDF137 KB
Technical informationPDF2749 KB
Technische InformationPDF2759 KB

CAD+CAE: LVL-M3

CADファイルタイプファイルサイズ
CAD 3-D / CAD 3-DSTP560 KB
CAD 3-D / CAD 3-DSTP533 KB
CAD 3-D / CAD 3-DSTP447 KB

関連製品: LVL-M3

Accessories

Female cordset, M12, 4-pin, PVC cablefa
General Notes Relating to Pepperl+Fuchs Product Information
接続先

株式会社 ピーアンドエフ
〒220-0022
神奈川県横浜市西区花咲町6-145
横浜花咲ビル5F 日本
日本
sales@jp.pepperl-fuchs.com
phone +81 45 6249077

株式会社ピーアンドエフ
大阪府豊中市新千里東町1-5-3
千里朝日阪急ビル15階
〒560-0082 大阪
日本
sales@jp.pepperl-fuchs.com
phone +81 6 6836-5620

© 2024 All Rights Reserved.

Pepperl+Fuchsはグローバルオートメーション市場向けにセンサや部品の開発を行っており、革新的かつ高品質な技術躍進のために日々努力を続けています。ドイツ・アメリカ・シンガポール・ハンガリー・インドネシア・ベトナムに生産拠点があり、すべての工場でISO9001認証を取得しています。