General specifications |
Signal type | Digital Output |
Functional safety related parameters |
Safety Integrity Level (SIL) | SIL 3 |
Systematic capability (SC) | SC 3 |
Performance level (PL) | PL e |
Supply |
Connection | loop powered |
Rated voltage | 19 ... 30 V DC loop powered |
Power dissipation | < 1.3 W |
Power consumption | < 1.3 W |
Input |
Connection side | control side |
Connection | Input terminals 5, 6 ; test input terminals 7, 8, 9, 10 |
Pulse/Pause ratio | 150 ms / 150 ms |
Test pulse length | max. 4 ms from DO card |
Test input | see functional safety manual |
Signal level | 0-signal: -5 ... 5 V 1-signal: 19 ... 26.5 V |
Rated current | 0-signal: typ. 1.6 mA at 1.5 V DC; typ. 8 mA at 3 V DC (maximum leakage current DO card) 1-signal: ≥ 36 mA (minimum load current DO card) |
Output |
Connection side | field side |
Connection | terminals 1, 2 |
Contact loading | 253 V AC/3 A/cos φ 0.7; 30 V DC/3 A resistive load 253 V AC / 1/8 HP |
Minimum switch current | 10 mA / 24 V DC |
Energized/De-energized delay | 150 ms / 150 ms |
Mechanical life | 5 x 106 switching cycles |
Transfer characteristics |
Switching frequency | < 3 Hz |
Galvanic isolation |
Input/Output | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff |
Indicators/settings |
Display elements | LEDs |
Labeling | space for labeling at the front |
Directive conformity |
Electromagnetic compatibility | |
| Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) |
Low voltage | |
| Directive 2014/35/EU | EN 61010-1:2010 |
Machinery Directive | |
| Directive 2006/42/EC | EN IEC 62061:2021 , EN/ISO 13849-1:2015 |
Conformity |
Electromagnetic compatibility | NE 21:2012 , EN 61326-3-1:2008 , EN 61326-3-2:2008 |
Degree of protection | IEC 60529:2013 |
Ambient conditions |
Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) Observe the temperature range limited by derating, see section derating. |
Mechanical specifications |
Degree of protection | IP20 |
Connection | screw terminals |
Mass | approx. 100 g |
Dimensions | 12.5 x 119 x 114 mm (0.5 x 4.7 x 4.5 inch) (W x H x D) , housing type A2 |
| Height | 119 mm |
| Width | 12.5 mm |
| Depth | 114 mm |
Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
Data for application in connection with hazardous areas |
Certificate | PF 15 CERT 3932 X |
| Marking | II 3G Ex nC ec IIC T4 Gc [device in zone 2] |
Directive conformity | |
| Directive 2014/34/EU | EN IEC 60079-0:2018+AC:2020 , EN 60079-7:2015 , EN 60079-15:2010 |
International approvals |
UL approval | E106378 |
General information |
Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |