Explosion Proof Power Contactors EXPC*

3-pole non-reversing contactors for Division 1 / Zone 1
Preconfigured line and load ports
Copper-free cast aluminum housing Type 4X / IP66
Breather drain and hinged cover standard
Incorporates Eaton XT IEC Power Control contractors

Technical Data
お問い合わせ

注: Pepperl+Fuchs GmbH(旧社名)で発行された証明書・適合宣言書などすべての製品関連文書は、Pepperl+Fuchs AG(新社名)にそのまま適用されます。

データシート(PDF):

技術データ EXPC*

型番
Explosion Proof Power Contactors

Electrical specifications
Operating voltage		115 ... 460 V
Rated frequency		50/60 Hz
Short circuit current limitation		see data table
Operating current		18 A - 170 A
Rated insulation voltage		690 V
Function		Power control
	Contact configuration	see data table
	Usage category	see data table
	Number of poles	see data table
	Auxiliary contacts	One (1) normally open contact
	Auxiliary contacts usage category	see data table
Mechanical specifications
Thread type		metric ISO pitch 1.5 mm or NPT ANSI ASME B1.20.1
Enclosure range		EJB
Enclosure cover		fully detachable
Cover fixing		stainless steel socket cap head screws
	Screws	see data table
	Yield stress	min. 450 N/mm²
Cover seal		none
Flamepath grease		Greasil MS4 or NEVER SEEZ Marine Grade
Degree of protection		Type 4, 4X, 7, 9 / IP66
Cable entry		see data table
Defined entry area		face B
Material
	Enclosure	Copper-free aluminum alloy or 316L stainless steel
	Finish	For aluminum: epoxy coated RAL 7005 (grey)
Mass		see data table
Dimensions		see data table values might differ slightly due to casting and manufacturing tolerances
Tightening torque
	Nut torque at enclosure (SW1)	see datasheets of stopping plugs
Mounting		see data table
Grounding		M6 external grounding points
Ambient conditions
Ambient temperature		-20 ... 50 °C (-4 ... 122 °F) @ T6
Data for application in connection with hazardous areas
EU-type examination certificate		INERIS 14 ATEX 0022X
	Marking	II 2 GD Ex d IIB+H₂ T* Gb Ex tb IIIC Db
International approvals
UL approval		Enclosure only
	cULus	Class I, Division 1, Groups B, C, D Class II, Division 1, Groups E, F, G
IECEx approval		IECEx INE 14.0029X
Conformity
Degree of protection		EN60529
Usage category		IEC / EN 60947
CE marking		0539
General information
Supplementary information		EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com.

Classifications

System	Classcode
ECLASS 13.0	27180508
ECLASS 12.0	27180508
ECLASS 11.0	27180508
ECLASS 10.0.1	27180508
ECLASS 9.0	27180508
ECLASS 8.0	27180508
ECLASS 5.1	40050501
ETIM 9.0	EC000243
ETIM 8.0	EC000243
ETIM 7.0	EC000243
ETIM 6.0	EC000243
ETIM 5.0	EC000243
UNSPSC 12.1	39121301