Serviceline Industrial Sensors
Serviceline Explosion Protection

Switch Disconnectors Ex e DIS.*

DIS.*
  • Various contact configurations and pole numbers
  • Labeling '0 - I'
  • Ex db eb and Ex tb certified
  • Installation in Zone 1, Zone 2, Zone 21 and Zone 22
  • Glass fiber reinforced polyester (GRP) enclosure
  • Stainless Steel enclosure
  • Padlockable switch
  • Function-adequate cable gland configurations

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH, also apply to Pepperl+Fuchs AG.

データシート(PDF):


技術データ  DIS.*

Electrical specifications
Operating voltage690 V max.
Rated impulse withstand voltage6 kV
Rated frequency50/60 Hz
Short circuit current limitationrecommended:
25 A : 35 A, gG
40 A : 63 A, gG
Operating current25 A max. or 40 A max.
Terminal capacitysee PDF data sheet
Rated insulation voltage800 V
Functionswitch disconnector
Colorblack and red
Contact configurationsee PDF data sheet
Switching configuration2 position changeover with left OFF
Switching diagramsee PDF data sheet
Usage categorysee PDF data sheet
Number of polessee PDF data sheet
Auxiliary contactssee PDF data sheet
Auxiliary contacts usage categorysee PDF data sheet
Operator actionengage - engage
Lockablein 'OFF' position threefold padlockable
Labeling0 - I
Mechanical specifications
Enclosure rangesee PDF data sheet
Enclosure coverfully detachable
Cover fixingstainless steel hexagonal head screws or M6 stainless steel combination Phillips and slotted screw
ScrewsM6
Number4
Tightening torquestainless steel : 2 Nm
GRP : 3.5 Nm
Cover sealstainless steel : one piece closed cell silicone
GRP : foamed silicone
Safetycover detachable only when operator in 'ON' position with SAF.* variants
Degree of protectionIP65
Cable entrysee PDF data sheet
Defined entry areaface B
Material
Enclosurecarbon loaded, antistatic glass fiber reinforced polyester (GRP) or AISI 316L, (1.4404) stainless steel
Finishinherent color black or brushed
Masssee PDF data sheet
Dimensionssee PDF data sheet
Tightening torque
Nut torque at enclosure (SW1)see datasheets of cable glands
Mountingsee PDF data sheet
GroundingGRP none as standard
stainless steel M6 internal/external brass grounding bolt or M10 internal/external brass grounding bolt
Ambient conditions
Ambient temperature-40 ... 55 °C (-40 ... 131 °F) @ T4
Data for application in connection with hazardous areas
EU-type examination certificateCML 16 ATEX 3009X
MarkingEx-Hexagon II 2 GD
Ex db eb IIC T* Gb
Ex tb IIIC T** °C Db
T4/T130 °C @ Ta +55 °C
International approvals
IECEx approvalIECEx CML 16.0008X
IA approvalstainless steel : MASC S/18-0003X
Conformity
Degree of protectionEN 60529
Usage categoryIEC / EN 60947
CE marking0080 or 0102, see type label
General information
Supplementary informationEC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com.

Documents: DIS.*

Short instructions, safety information言語ファイルタイプファイルサイズ
Brief Instructions Switch Disconnectors Ex e / Safety Switches Ex e - DIS* / SAF*ENGPDF754 KB

Approvals+Certificates: DIS.*

Statements of compliance認証番号ファイルタイプファイルサイズ
EU-Declaration of Conformity / EU-KonformitätserklärungDOC-3235APDF75 KB
Certificates
CML IECEx Certificate of ConformityIECEx CML 16.0008XLINK---
Europe CML II 2GD ATEXCML 16ATEX3009XPDF767 KB
South Africa MASCMASC S/18-0003XPDF464 KB
Quick Selection Guide for Electrical Explosion Protection Equipment

Get a free PDF copy of our Quick Select Product Guide for Electrical Explosion Protection Equipment. It offers you a comprehensive overview of our entire portfolio.