Selecione seu país

Ir para o site global

NJ20P+U1+A2 Inductive Sensor

Principais benefícios

  • Only for non-ferrous metals
  • 20 mm non-flush
  • 4-wire DC
Product Compliance: Europe – CE
Product Compliance: USA - cULus LISTED
Product Compliance: United Kingdom – UKCA
Nota

Todos os documentos relacionados ao produto, como certificados, declarações de conformidade etc., que foram emitidos antes da conversão sob o nome Pepperl+Fuchs GmbH ou Pepperl+Fuchs AG, também se aplicam à Pepperl+Fuchs SE.

PT
  • PT
  • EN
  • CS
  • DE
  • ES
  • FR
  • IT
  • PL
  • SV
  • ZH

Dados técnicos de NJ20P+U1+A2

Switching functioncomplementary
Output typePNP
Rated operating distancesn20 mm
Installationnon-flush
Output polarityDC
Assured operating distancesa1 ... 16.2 mm
Reduction factor rAl 1
Reduction factor rCu 1
Reduction factor rSt37 0
Reduction factor rBrass 1 (Minimum distance: 2 mm)
Output type4-wire
Operating voltageUB10 ... 30 V
Switching frequencyf0 ... 200 Hz
HysteresisH1 ... 10 % typ. 5 %
Reverse polarity protectionreverse polarity protected
Short-circuit protectionpulsing
Voltage dropUd≤ 3 V
Operating currentIL0 ... 200 mA
No-load supply currentI0≤ 20 mA
Time delay before availabilitytv≤ 10 ms
Operating voltage indicatorLED, green
Switching state indicatorLED, yellow
MTTFd772 a
Diagnostic Coverage (DC)0 %
Standard conformity
StandardsEN IEC 60947-5-2
UL approvalcULus Listed
Load Type: Resistive
Circuitry: Class 2 Power Source
Enclosure Type Rating: Type 1
Supply/Switching Voltage: 30 V DC
Output Switching Current: 200 mA
CCC approvalCCC approval / marking not required for products rated ≤36 V
Ambient temperature-25 ... 70 °C (-13 ... 158 °F)
Connection typeterminal compartment
Information for connectionA maximum of two conductors with the same core cross section may be mounted on one terminal connection!
tightening torque 1.2 Nm + 10 %
Core cross sectionup to 2.5 mm2
Minimum core cross-sectionwithout wire end ferrules 0.5 mm2 , with connector sleeves 0.34 mm2
Maximum core cross-sectionwithout wire end ferrules 2.5 mm2 , with connector sleeves 1.5 mm2
Housing materialPBT
Sensing facePBT
Housing basePBT
Degree of protectionIP68
Dimensions
Height40 mm
Width40 mm
Length118 mm
Notas de gênero

Páginas relacionadas

Está procurando mais informações? Fique à vontade para aprender mais sobre nossas páginas relacionadas.