OMT50-R100-2EP-IO-0,3M-V1 Distance sensor

Principais benefícios

Miniature design with versatile mounting options
Space-saving distance sensors in small standardized design
Multi Pixel Technology (MPT) - exact and precise signal evaluation
IO-Link interface for service and process data

Product photo: Distance sensor OMT50-R100-2EP-IO-0,3M-V1

Dimensions: Distance sensor OMT50-R100-2EP-IO-0,3M-V1

Nota

Todos os documentos relacionados ao produto, como certificados, declarações de conformidade etc., que foram emitidos antes da conversão sob o nome Pepperl+Fuchs GmbH ou Pepperl+Fuchs AG, também se aplicam à Pepperl+Fuchs SE.

DE

DE
EN
ES
FR
IT

Folha de dados Classificação Design / Simulation Certificações Software Produtos relacionados

Dados técnicos de OMT50-R100-2EP-IO-0,3M-V1

Measurement to object, 50 mm detection range, red light, measured value via IO-Link, 2 x push-pull output, fixed cable with M12 plug

Measuring range		20 ... 50 mm
Reference target		standard white, 100 mm x 100 mm
Light source		LED
Light type		modulated visible red light
LED risk group labelling		exempt group
Angle deviation		max. +/- 1.5 °
Diameter of the light spot		approx. 4 mm at a distance of 50 mm
Opening angle		4 °
Ambient light limit		EN 60947-5-2 : 30000 Lux
Resolution		0.01 mm

MTTF_d		600 a
Mission Time (T_M)		20 a
Diagnostic Coverage (DC)		0 %

Operation indicator		LED green: constantly on - power on flashing (4Hz) - short circuit flashing with short break (1 Hz) - IO-Link mode
Function indicator		LED yellow: constantly on - switch output active constantly off - switch output inactive
Control elements		Teach-In key
Control elements		5-step rotary switch for operating modes selection

Operating voltage	U_B	10 ... 30 V DC
Ripple		max. 10 %
No-load supply current	I₀	< 25 mA at 24 V supply voltage
Protection class		III

Interface type		IO-Link ( via C/Q = pin 4 )
IO-Link revision		1.1
Device profile		Smart Sensor
Device ID		0x110901 (1116417)
Transfer rate		COM2 (38.4 kBit/s)
Min. cycle time		3 ms
Process data width		Process data input 3 Byte Process data output 2 Bit
SIO mode support		yes
Compatible master port type		A

Switching type		The default setting is: C/Q - Pin4: NPN normally open, PNP normally closed, IO-Link Q2 - Pin2: NPN normally-open, PNP normally-closed
Signal output		2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
Switching voltage		max. 30 V DC
Switching current		max. 100 mA , resistive load
Usage category		DC-12 and DC-13
Voltage drop	U_d	≤ 1.5 V DC
Response time		2 ms

Communication interface		IEC 61131-9
Product standard		EN 60947-5-2

Temperature drift		20 µm/K
Warm up time		5 min
Repeat accuracy		≤ 0.15 mm
Linearity error		± 0.3 mm

UL approval

E87056 , cULus Listed , class 2 power supply , type rating 1

Ambient temperature		10 ... 60 °C (50 ... 140 °F)
Storage temperature		-40 ... 70 °C (-40 ... 158 °F)

Degree of protection

IP67 / IP69 / IP69K

Connection

300 mm fixed cable with M12 x 1, 4-pin connector

Material

Housing		PC (Polycarbonate)
Optical face		PMMA

Mass

approx. 17 g

Dimensions

Height		44.5 mm
Width		11 mm
Depth		21.5 mm

Cable length

0.3 m

Notas de gênero

Notícias e aplicações relacionadas

Leia mais sobre notícias e aplicações relacionadas a este produto.

R100 photoelectric sensor in safe residual stack monitoring application

Safe Residual Stack Monitoring on Packaging Machines

With increased automation in industrial plants, the requirements for machine safety are rising, which also affects the packaging industry. Learn how an individual safety concept is developed in order to meet higher safety requirements.

Mais informações