OMT120-R103-2EP-IO-V31-L Distance sensor

Principais benefícios

Miniature design with versatile mounting options
Space-saving distance sensors in small standardized design
Multi Pixel Technology (MPT) - exact and precise signal evaluation
DuraBeam Laser Sensors - durable and employable like an LED
IO-Link interface for service and process data

Mostrar mais

Product photo: Distance sensor OMT120-R103-2EP-IO-V31-L

Dimensions: Distance sensor OMT120-R103-2EP-IO-V31-L

Nota

Todos os documentos relacionados ao produto, como certificados, declarações de conformidade etc., que foram emitidos antes da conversão sob o nome Pepperl+Fuchs GmbH ou Pepperl+Fuchs AG, também se aplicam à Pepperl+Fuchs SE.

DE

DE
EN
ES
FR
IT

Folha de dados Classificação Design / Simulation Certificações Software Produtos relacionados

Dados técnicos de OMT120-R103-2EP-IO-V31-L

Distance sensor

Measuring range

40 ... 120 mm

Reference target

standard white, 100 mm x 100 mm

Light source

laser diode

Light type

modulated visible red light

Laser nominal ratings

Note		LASER LIGHT , DO NOT STARE INTO BEAM
Laser class		1
Wave length		680 nm
Beam divergence		> 5 mrad d63 d63 < 1 mm in the range of 50 mm ... 250 mm
Pulse length		3 µs
Repetition rate		approx. 3 kHz
max. pulse energy		15.2 nJ

Angle deviation

max. +/- 1.5 °

Diameter of the light spot

approx. 3 mm at a distance of 120 mm

Opening angle

approx. 2 °

Ambient light limit

EN 60947-5-2 : 30000 Lux

Resolution

0.1 mm

MTTF_d		560 a
Mission Time (T_M)		20 a
Diagnostic Coverage (DC)		0 %

Operation indicator		LED green: constantly on - power on flashing (4Hz) - short circuit flashing with short break (1 Hz) - IO-Link mode
Function indicator		LED yellow: constantly on - switch output active constantly off - switch output inactive
Control elements		Teach-In key
Control elements		5-step rotary switch for operating modes selection

Operating voltage	U_B	10 ... 30 V DC
Ripple		max. 10 %
No-load supply current	I₀	< 25 mA at 24 V supply voltage
Protection class		III

Interface type		IO-Link ( via C/Q = pin 4 )
IO-Link revision		1.1
Device profile		Smart Sensor
Device ID		0x11090A (1116426)
Transfer rate		COM2 (38.4 kBit/s)
Min. cycle time		3 ms
Process data width		Process data input 3 Byte Process data output 2 Bit
SIO mode support		yes
Compatible master port type		A

Switching type		The default setting is: C/Q - Pin4: NPN normally open, PNP normally closed, IO-Link Q2 - Pin2: NPN normally-open, PNP normally-closed
Signal output		2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
Switching voltage		max. 30 V DC
Switching current		max. 100 mA , resistive load
Usage category		DC-12 and DC-13
Voltage drop	U_d	≤ 1.5 V DC
Response time		2 ms

Communication interface		IEC 61131-9
Product standard		EN 60947-5-2
Laser safety		EN 60825-1:2014

Temperature drift		0.05 %/K
Warm up time		5 min
Repeat accuracy		≤ 1 %
Linearity error		± 1 %

UL approval		E87056 , cULus Listed , class 2 power supply , type rating 1
FDA approval		IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007

Ambient temperature		10 ... 60 °C (50 ... 140 °F)
Storage temperature		-40 ... 70 °C (-40 ... 158 °F)

Degree of protection

IP67 / IP69 / IP69K

Connection

M8 x 1 connector, 4-pin

Material

Housing		PC (Polycarbonate)
Optical face		PMMA

Mass

approx. 12 g

Dimensions

Height		43.9 mm
Width		15 mm
Depth		26.7 mm

Notas de gênero