OBT300-R201-2EP-IO-0,3M-V1-1T Triangulation sensor (BGE)

Principais benefícios

Medium design with versatile mounting options
Precision object detection, almost irrespective of the color
Secure and gapless detection, even near the surface through background evaluation
Extended temperature range
-40 °C ... 60 °C
High degree of protection IP69K
IO-Link interface for service and process data

Mostrar mais

Product photo: Triangulation sensor (BGE) OBT300-R201-2EP-IO-0,3M-V1-1T

Dimensions: Triangulation sensor (BGE) OBT300-R201-2EP-IO-0,3M-V1-1T

Connection Assignment: Triangulation sensor (BGE) OBT300-R201-2EP-IO-0,3M-V1-1T

Nota

Todos os documentos relacionados ao produto, como certificados, declarações de conformidade etc., que foram emitidos antes da conversão sob o nome Pepperl+Fuchs GmbH ou Pepperl+Fuchs AG, também se aplicam à Pepperl+Fuchs SE.

DE

DE
EN
ES
FR

Folha de dados Classificação Design / Simulation Certificações Software Produtos relacionados

Dados técnicos de OBT300-R201-2EP-IO-0,3M-V1-1T

Triangulation sensor with background evaluation

Detection range		30 ... 300 mm
Detection range min.		30 ... 80 mm
Detection range max.		30 ... 300 mm
Adjustment range		80 ... 300 mm
Reference target		standard white, 100 mm x 100 mm
Light source		LED
Light type		modulated visible red light
LED risk group labelling		exempt group
Black-white difference (6 %/90 %)		< 5 % at 300 mm
Diameter of the light spot		approx. 8 mm x 8 mm at a distance of 300 mm
Opening angle		approx. 1.5 °
Ambient light limit		EN 60947-5-2 : 70000 Lux

MTTF_d		600 a
Mission Time (T_M)		20 a
Diagnostic Coverage (DC)		0 %

Operation indicator		LED green: constantly on - power on flashing (4Hz) - short circuit flashing with short break (1 Hz) - IO-Link mode
Function indicator		LED yellow: constantly on - background detected (object not detected) constantly off - object detected
Control elements		Light-on/dark-on changeover switch
Control elements		Sensing range adjuster

Operating voltage	U_B	10 ... 30 V DC
Ripple		max. 10 %
No-load supply current	I₀	< 26 mA at 24 V supply voltage
Protection class		III

Interface type		IO-Link ( via C/Q = pin 4 )
IO-Link revision		1.1
Device profile		Identification and diagnosis Smart Sensor type 2.4
Device ID		0x111712 (1120018)
Transfer rate		COM2 (38.4 kBit/s)
Min. cycle time		2.3 ms
Process data width		Process data input 1 Bit Process data output 2 Bit
SIO mode support		yes
Compatible master port type		A

Switching type		The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally open / dark-on, PNP normally closed / light-on, IO-Link /Q - Pin2: NPN normally closed / light-on, PNP normally open / dark-on
Signal output		2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
Switching voltage		max. 30 V DC
Switching current		max. 100 mA , resistive load
Usage category		DC-12 and DC-13
Voltage drop	U_d	≤ 1.5 V DC
Switching frequency	f	500 Hz
Response time		1 ms

Communication interface		IEC 61131-9
Product standard		EN 60947-5-2

UL approval		E87056 , cULus Listed , class 2 power supply , type rating 1
CCC approval		CCC approval / marking not required for products rated ≤36 V

Ambient temperature		-40 ... 60 °C (-40 ... 140 °F) , cable, fixed installation -20 ... 60 °C (-4 ... 140 °F) , movable cable not appropriate for conveyor chains
Storage temperature		-40 ... 70 °C (-40 ... 158 °F)

Degree of protection

IP67 / IP69 / IP69K

Connection

300 mm fixed cable with M12 x 1, 4-pin connector

Material

Housing		PC (Polycarbonate)
Optical face		PMMA

Mass

approx. 55 g

Dimensions

Height		61.7 mm
Width		15 mm
Depth		41.7 mm

Cable length

0.3 m

Notas de gênero