Infraestructura de bus de campo y FieldConnex Ethernet-APL

No disponible para compra

Universal Fieldbus Power Hub, Motherboard, Common Interface MB-FB-2R

2 segments, redundant, individual modules per segment
Supports all PLC and PCS hosts
High-power trunk: Live work on devices in any hazardous area
Features for best signal quality, low heat dissipation
For FOUNDATION Fieldbus H1 and PROFIBUS PA
Optional advanced diagnostics
Passive impedance and CREST technology for high reliability
Supports Ex ic/nL voltage limitation
Installation in Zone 2/Div. 2

Technical Data
Informative Literature
Product Documentation
Design / Simulation
Approvals
Productos asociados
Pregunte a un Experto

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Descargue la hoja de datos completa en PDF:

Extracto de la hoja de datos: Información técnica del MB-FB-2R

Supply
Connection		redundant
Rated voltage		19.2 ... 35 V SELV/PELV
Rated current		16 A
Fieldbus connection
Number of segments
	Redundant	2
Host-side		redundant general purpose host
Terminating resistor		selectable 100 Ω
Indicators/operating means
Fault signal		VFC alarm output via connectors
Galvanic isolation
Fieldbus segment/Fieldbus segment		functional insulation acc. to DIN EN 50178, rated insulation voltage 50 V_eff
Fieldbus segment/Supply		functional insulation acc. to DIN EN 50178, rated insulation voltage 50 V_eff
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013
Standard conformity
Electromagnetic compatibility		NE 21:2011
Degree of protection		IEC 60529
Fieldbus standard		IEC 61158-2
Shock resistance		EN 60068-2-27
Vibration resistance		EN 60068-2-6
Corrosion resistance		acc. to ISA-S71.04-1985, severity level G3
Ambient conditions
Ambient temperature		-40 ... 60 °C (-40 ... 140 °F)
Storage temperature		-40 ... 85 °C (-40 ... 185 °F)
Relative humidity		< 95 % non-condensing
Shock resistance		15 g , 11 ms
Vibration resistance		1 g , 10 ... 150 Hz
Pollution degree		max. 2, according to IEC 60664
Corrosion resistance		acc. to ISA-S71.04-1985, severity level G3
Mechanical specifications
Connection type		screw terminals
Core cross section		2.5 mm²
Housing material		Polycarbonate
Degree of protection		IP20
Mass		approx. 500 g
Dimensions
	Height	220 mm
	Width	125 mm
	Depth	65 mm
Mounting		DIN mounting rail
Coating		conformal coated
Data for application in connection with hazardous areas
Certificate		TÜV 04 ATEX 2500 X
	Marking	II 3 G Ex nA IIC T4 Gc
Directive conformity
	Directive 2014/34/EU	EN 60079-0:2012 , EN 60079-11:2012 , EN 60079-15:2010
International approvals
FM approval		CoC 3024816, CoC 3024816C
	Approved for	Class I, Division 2, Groups A, B, C, D, T4 / Class I, Zone 2, AEx/Ex nA IIC T4
IECEx approval		IECEx TUN 13.0038X
	Approved for	Ex nA IIC T4 Gc
General information
Supplementary information		Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com.

Classifications

System	Classcode
ECLASS 13.0	27242603
ECLASS 12.0	27242603
ECLASS 11.0	27242603
ECLASS 10.0.1	27242603
ECLASS 9.0	27242603
ECLASS 8.0	27242603
ECLASS 5.1	27242603
ETIM 9.0	EC001598
ETIM 8.0	EC001598
ETIM 7.0	EC001598
ETIM 6.0	EC001598
ETIM 5.0	EC001604
UNSPSC 12.1	39121008

Details: MB-FB-2R

Informative Literature: MB-FB-2R

Literature	Idioma	Tipo de archivo	Tamaño
Application Report - Controlling and Monitoring liquid Helium at the Deutsches Elektronen-Synchrotron	ENG	PDF	361 KB
Application Report - Digital Communication in Steel-Plate Manufacturing	ENG	PDF	470 KB

Product Documentation: MB-FB-2R

System Descriptions	Idioma	Tipo de archivo	Tamaño
Conformity matrix for R2-SP-IC* and F2-SP-IC* with motherboards: MB-, MBHD, FBTA-228-BPFB-8, FBTA-228-BPFB-R-4R and power supply modules: HD2-FBPS-*	ENG	PDF	73 KB
Manuals
Manual	ENG	PDF	3044 KB

Design / Simulation: MB-FB-2R

CAD	Idioma	Tipo de archivo	Tamaño
DXF Drawings Power Hub MB-FB-, Subject to change without notice / DXF Zeichnungen Power Hub MB-FB-, Änderungen vorbehalten	ALL	ZIP	8539 KB

Approvals: MB-FB-2R

Certificates	Número de Certificado	Idioma	Tipo de archivo	Tamaño
Canada FM	FM 19 CA 0011X	ALL	PDF	356 KB
Europe TUV Nord ATEX Category 3 G	TÜV 04 ATEX 2500X	ALL	PDF	1498 KB
India PESO (India) CCOE	A/P/HQ/KA/104/5874 (P507650)	ALL	PDF	101 KB
USA FM	FM 19 US 0015X	ALL	PDF	213 KB
Worldwide TUV Nord Ex nA nC IECEx nA	IECEx TUN 13.0038X	ALL	LINK	---

Productos asociados: MB-FB-2R

Matching System Components

	HD2-DM-A Fieldbus Power Hub, Advanced Diagnostic Module
	Comprehensive diagnostics for fieldbus physical layer and power supply, Plug-in Module for the FieldConnex Power Hub, Precise measurements through passive circuits, For commissioning, online monitoring and troubleshooting, For FOUNDATION Fieldbus H1 and PROFIBUS PA, IECEx approval, International, Europe, USA, Canada, Device coupler location: non-explosion hazardous area Zone 2 - high-power trunk Zone 1 - high-power trunk Division 2 - high-power trunk Division 1 - high-power trunkpa

	HD2-DM-B Fieldbus Power Hub, Basic Diagnostic Module
	Basic monitoring for power supply output and health, Plug-in Module for the FieldConnex Power Hub, Plug and play - no engineering required, For online monitoring, For FOUNDATION Fieldbus H1 and PROFIBUS PA, IECEx approval, International, Europe, USA, Canada, Device coupler location: non-explosion hazardous area Zone 2 - high-power trunk Zone 1 - high-power trunk Division 2 - high-power trunk Division 1 - high-power trunk, Device coupler location [2]: Zone 2 - high-power trunkpa

	HD2-FBPS-1.17.500 Fieldbus Power Hub, Power Supply Module
	Output: 15 ... 17 V/500 mA, Voltage limitation for FISCO ic, Entity ic, also FNICO and Ex nL, With galvanic isolation, Installation in Zone 2/Class I, Div. 2, For FOUNDATION Fieldbus H1 and PROFIBUS PA, IECEx approval, International, Europe, USA, Canada, Device coupler location: Zone 2 - high-power trunk, Instrument location / spur protection: Zone 2 - all relevant types of protection, Function: Fieldbus power supply, Design / Mounting: Motherboard basedpa

	HD2-FBPS-1.23.500 Fieldbus Power Hub, Power Supply Module
	Output: 21 ... 23 V/500 mA, Voltage limitation for Entity ic and Ex nL, With galvanic isolation, Installation in Zone 2/Class I, Div. 2, For FOUNDATION Fieldbus H1 and PROFIBUS PA, IECEx approval, International, Europe, USA, Canada, Device coupler location: Zone 2 - high-power trunk, Instrument location / spur protection: Zone 2 - all relevant types of protection, Function: Fieldbus power supply, Design / Mounting: Motherboard basedpa

	HD2-FBPS-1.25.360 Fieldbus Power Hub, Power Supply Module
	2-channel power supply system, modular, motherboard-based with transparent coupling between PROFIBUS DP and PA. motherboard and modules, 2 segments, simplex, individual modules per segment, Couples PROFIBUS PA devices transparently to PROFIBUS DP, High-power trunk: Live work on devices in any hazardous area, Transparent, configuration free, Optimized for size and quality, low heat dissipation, IECEx approval, International, Europe, USA, Canadapa

	HD2-FBPS-1.500 Fieldbus Power Hub, Power Supply Module
	Output: 28 ... 30 V/500 mA, High-power trunk for high device count and long cable lengths, With galvanic isolation, Installation in Zone 2/Class I, Div. 2, For FOUNDATION Fieldbus H1 and PROFIBUS PA, IECEx approval, International, Europe, USA, Canada, Device coupler location: non-explosion hazardous area Zone 2 - high-power trunk Zone 1 - high-power trunk Division 2 - high-power trunk Division 1 - high-power trunk, Device coupler location [2]: Zone 2 - high-power trunkpa

	HD2-DM-A.RO Fieldbus Power Hub, Advanced Diagnostic Module with Relay Output
	Diagnostics for fieldbus physical layer and power supply, Plug-in Module for the FieldConnex Power Hub, Plug and play - no engineering required, For online monitoring, For FOUNDATION Fieldbus H1 and PROFIBUS PA, IECEx approval, International, Europe, USA, Canada, Device coupler location: non-explosion hazardous area Zone 2 - high-power trunk Zone 1 - high-power trunk Division 2 - high-power trunk Division 1 - high-power trunk, Device coupler location [2]: Zone 2 - high-power trunkpa

Notas generales sobre la información de los productos de Pepperl+Fuchs

Enlaces directos

Aplicaciones IIoT en industrias de procesos

Ethernet-APL permite una comunicación continua en todos los niveles jerárquicos. Obtenga más información sobre esta tecnología pionera...

Servicio de información RSS para actualizaciones de PANOS

Manténgase informado cuando se publique una nueva actualización de software de PANOS, el sistema operativo para conmutadores Ethernet-APL: Con nuestro canal RSS recibirá una notificación por correo electrónico en su bandeja de entrada inmediatamente después de que se haya publicado una nueva versión.

Bus de campo FieldConnex® así de fácil

Desde las decisiones a la planificación, instalación y puesta en marcha, hasta el funcionamiento y mantenimiento: descubra cómo sacar el máximo partido de su infraestructura de bus de campo…

Productos

Tecnología de bus de campo para zona segura o cualquier área peligrosa

Pepperl+Fuchs, S.A.
Txori-Erri Etorbidea, 46
Edificio Esser
48150 Sondika (Vizcaya)
España
sov@es.pepperl-fuchs.com
phone +34 94 4535 020

Pepperl + Fuchs es líder en el desarrollo y la fabricación de sensores electrónicos y componentes para el mercado de la automatización global. Su incesante innovación, calidad duradera y crecimiento constante garantizan el éxito continuado, desde hace más de 70 años. Pepperl + Fuchs emplea a 6.300 personas en todo el mundo y cuenta con fábricas en Alemania, EE.UU., Singapur, Hungría, Indonesia y Vietnam, la mayoría de ellas con certificado ISO 9001.