Retroreflective sensor MLV41-54-G-1700

Rugged series in corrosion-resistant metal housing
Reliable detection of reflecting metall objects
Sturdy aluminum housing
Scratch-resistant and solvent resistant glass lens
Clearly visible LED functional display
Resistant against noise: reliable operation under all conditions

Technical Data
CAD+CAE
Approvals+Certificates
関連製品
お問い合わせ

注: Pepperl+Fuchs GmbH(旧社名)で発行された証明書・適合宣言書などすべての製品関連文書は、Pepperl+Fuchs AG(新社名)にそのまま適用されます。

技術データ MLV41-54-G-1700

型番
Robust retroreflective sensor for glass detection, compact housing design, 200 mm detection range, red light, 2 push-pull outputs, M12 plug

General specifications
Effective detection range		0 ... 200 mm
Reference target		VR10 reflector
Light source		LED
Light type		modulated visible red light , 660 nm
Polarization filter		yes
Angle deviation		max. ± 1°
Diameter of the light spot		approx. 8 mm at 200 mm detection range
Opening angle		approx. 2 °
Ambient light limit		40000 Lux
Functional safety related parameters
MTTF_d		900 a
Mission Time (T_M)		20 a
Diagnostic Coverage (DC)		0 %
Indicators/operating means
Operation indicator		LED green, statically lit Power on , Undervoltage indicator: Green LED, pulsing (approx. 0.8 Hz) , short-circuit : LED green flashing (approx. 4 Hz)
Function indicator		2 LEDs yellow for switching state, stability control, TEACH-IN and contrast detection mode
Control elements		5-step switch for setting the contrast detection levels.
Contrast detection levels		10 % - clean, water filled PET bottles 18 % - clear glass bottles 40 % - colored glass or opaque materials adjustable by Teach-In key or external wire
Electrical specifications
Operating voltage		10 ... 30 V DC
Ripple		max. 10 %
No-load supply current		max. 35 mA
Output
Signal output		2 push-pull (4 in 1) outputs, complementary, short-circuit proof, reverse polarity protected
Switching voltage		max. 30 V DC
Switching current		max. 100 mA
Voltage drop		≤ 2.5 V DC
Switching frequency		1000 Hz
Response time		0.5 ms
Compliance with standards and directives
Directive conformity
	EMC Directive 2004/108/EC	EN 60947-5-2:2007
Standard conformity
	Product standard	EN 60947-5-2:2007 IEC 60947-5-2:2007
Approvals and certificates
Protection class		II, rated voltage ≤ 50 V AC with pollution degree 1-2 according to IEC 60664-1 , functional insulation acc. to DIN EN 50178
UL approval		cULus Listed 57M3 (Only in association with UL Class 2 power supply; Type 1 enclosure)
CCC approval		CCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature		-40 ... 60 °C (-40 ... 140 °F)
Storage temperature		-40 ... 75 °C (-40 ... 167 °F)
Mechanical specifications
Degree of protection		IP67
Connection		4-pin, M12 x 1 connector
Material
	Housing	Aluminum , Delta-Seal coated
	Optical face	glass pane
	Connector	metal
Mass		50 g
Dimensions
	Height	56.5 mm
	Width	31 mm
	Depth	13.6 mm

Classifications

System	Classcode
ECLASS 13.0	27270902
ECLASS 12.0	27270902
ECLASS 11.0	27270902
ECLASS 10.0.1	27270902
ECLASS 9.0	27270902
ECLASS 8.0	27270902
ECLASS 5.1	27270902
ETIM 9.0	EC002717
ETIM 8.0	EC002717
ETIM 7.0	EC002717
ETIM 6.0	EC002717
ETIM 5.0	EC002717
UNSPSC 12.1	39121528

Details: MLV41-54-G-1700

Datasheet: MLV41-54-G-1700

Datasheet	ファイルタイプ	ファイルサイズ
Datasheet MLV41-54-G-1700	PDF	228 KB
Fiche de données MLV41-54-G-1700	PDF	225 KB
Datenblatt MLV41-54-G-1700	PDF	223 KB
Hoja de datos MLV41-54-G-1700	PDF	225 KB

CAD+CAE: MLV41-54-G-1700

CAD	ファイルタイプ	ファイルサイズ
CAD 3-D / CAD 3-D	STP	840 KB

Approvals+Certificates: MLV41-54-G-1700

Certificates	ファイルタイプ	ファイルサイズ
Canada USA UL Ordinary Location	LINK	---
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	PDF	309 KB

関連製品: MLV41-54-G-1700

Accessories

	OMH-09 Mounting aid
	Mounting bracket for Sensors series MLV41 for M12 rod mountingfa

General Notes Relating to Pepperl+Fuchs Product Information

R10x and R20x series photoelectric sensors

R10x、R20xシリーズ

1つの製品で光電センサの機能と革新的なテクノロジーのソリューションを実現しました。新製品R10x、R20xシリーズをご覧ください…

ML100 Series—The Problem Solver for Special Applications

Whether glass, solar wafers or printed circuit boards: The photoelectric sensors of the ML100 series are precisely tailored to meet the requirements of various complex detection tasks. Learn more about the portfolio and find the ideal sensor for your application ...