Fabrika Otomasyonu
Proses Otomasyonu
Solenoid Driver KFD0-SD2-Ex1.1180
- 1-channel isolated barrier
- 24 V DC supply (loop powered)
- Current limit 80 mA at 11 V DC
- Up to SIL 3 acc. to IEC/EN 61508
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Tam veri sayfasını PDF olarak indirin:
Veri sayfası alıntısı: Teknik veriler KFD0-SD2-Ex1.1180
| General specifications | ||
|---|---|---|
| Signal type | Digital Output | |
| Functional safety related parameters | ||
| Safety Integrity Level (SIL) | SIL 3 | |
| Supply | ||
| Rated voltage | 20 ... 35 V DC , loop powered | |
| Power dissipation | < 1 W (≤ 30 V) | |
| Input | ||
| Connection side | control side | |
| Connection | terminals 7, 8 | |
| Rated voltage | 20 ... 35 V DC | |
| Current | 140 mA at 20 V input voltage, load = 140 Ω 100 mA at 35 V input voltage, load = 140 Ω |
|
| Output | ||
| Connection side | field side | |
| Connection | terminals 1+, 2- | |
| Internal resistor | ≤ 150 Ω | |
| Current | ≥ 80 mA | |
| Voltage | ≥ 11 V | |
| Open loop voltage | min. 22.7 V | |
| Output current | 80 mA | |
| Output signal | These values are valid for the rated operating voltage 20 ... 35 V DC. | |
| Energized/De-energized delay | single operation: typ. 1.7 ms/50 µs; periodical: typ. 5 µs/50 µs | |
| Indicators/settings | ||
| Display elements | LED | |
| Labeling | space for labeling at the front | |
| Directive conformity | ||
| Electromagnetic compatibility | ||
| Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) | |
| Conformity | ||
| Electromagnetic compatibility | NE 21:2006 | |
| Degree of protection | IEC 60529:2001 | |
| Protection against electrical shock | UL 61010-1:2004 | |
| Ambient conditions | ||
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) | |
| Mechanical specifications | ||
| Degree of protection | IP20 | |
| Connection | screw terminals | |
| Mass | approx. 100 g | |
| Dimensions | 20 x 107 x 115 mm (0.8 x 4.2 x 4.5 inch) (W x H x D) , housing type B1 | |
| Height | 107 mm | |
| Width | 20 mm | |
| Depth | 115 mm | |
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 | |
| Data for application in connection with hazardous areas | ||
| EU-type examination certificate | BASEEFA 06 ATEX 0252 | |
| Marking |  II (1)G [Ex ia Ga] IIB II (1)D [Ex ia Da] IIIC I (M1) [Ex ia Ma] I |
|
| Voltage | 25.2 V | |
| Current | 184 mA | |
| Power | 1159 mW | |
| Input | ||
| Maximum safe voltage | 250 V (Attention! The rated voltage can be lower.) | |
| Certificate | TÜV 99 ATEX 1499 X | |
| Marking | II 3G Ex nA II T4 |
|
| Galvanic isolation | ||
| Input/Output | safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V | |
| Directive conformity | ||
| Directive 2014/34/EU | EN IEC 60079-0:2018+AC:2020 , EN 60079-11:2012 , EN 60079-15:2010 | |
| International approvals | ||
| FM approval | ||
| Control drawing | 116-0309 | |
| UL approval | E106378 | |
| Control drawing | 116-0316 (cULus) | |
| IECEx approval | ||
| IECEx certificate | IECEx BAS 06.0058 IECEx CML 19.0093X |
|
| IECEx marking | [Ex ia Ga] IIB , [Ex ia Da] IIIC , [Ex ia Ma] I Ex ec IIC T4 Gc |
|
| General information | ||
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27210101 |
| ECLASS 12.0 | 27210190 |
| ECLASS 11.0 | 27210190 |
| ECLASS 10.0.1 | 27210190 |
| ECLASS 9.0 | 27210190 |
| ECLASS 8.0 | 27210190 |
| ECLASS 5.1 | 27210121 |
| ETIM 9.0 | EC001485 |
| ETIM 8.0 | EC001485 |
| ETIM 7.0 | EC001485 |
| ETIM 6.0 | EC001485 |
| ETIM 5.0 | EC001485 |
| UNSPSC 12.1 | 39121008 |
Details: KFD0-SD2-Ex1.1180
Function
This isolated barrier is used for intrinsic safety applications. It supplies power to solenoids, LEDs, and audible alarms located in a hazardous area.
It is loop powered, so the available energy at the output is received from the input signal. The output signal has a resistive characteristic. As a result the output voltage and current are dependent on the load and the input voltage.
At full load, 11 V at 80 mA is available for the hazardous area application.
Informative Literature: KFD0-SD2-Ex1.1180
| Literature | Dil | Dosya Tipi | Dosya Boyutu |
|---|---|---|---|
| Application Report - Energy Generation in Wastwater Treatment Plants | ENG | 532 KB | |
| Application Report - Generating Electricity in Coal-Fired Power Plants | ENG | 412 KB | |
| Application Report - Screening Systems in Sewage Treatment Plants | ENG | 577 KB | |
| Application Report - Sicherer Brennstofftransport in Kohlekraftwerken | ENG | 391 KB | |
| Application Report - Water Inlet in Wastewater Treatment Plants | ENG | 526 KB |
Product Documentation: KFD0-SD2-Ex1.1180
| Product information | Dil | Dosya Tipi | Dosya Boyutu |
|---|---|---|---|
| Application Guideline Solenoid Drivers | ENG | 734 KB | |
| Safety and Security Documentation | |||
| Instruction manual | ENG | 171 KB | |
| Safety Manual | ENG | 414 KB | |
| Manuals | |||
| Manual | ENG | 3685 KB | |
Design / Simulation: KFD0-SD2-Ex1.1180
| CAD | Dil | Dosya Tipi | Dosya Boyutu |
|---|---|---|---|
| CAD 3-D / CAD 3-D | ALL | STP | 105 KB |
| CAD Portal / CAD Portal | ALL | LINK | --- |
| CAE | |||
| EPLAN macro EDZ / EPLAN Makro EDZ | ALL | EDZ | 46 KB |
Approvals: KFD0-SD2-Ex1.1180
| Certificates | Sertifika No. | Dil | Dosya Tipi | Dosya Boyutu |
|---|---|---|---|---|
| Australia Test Safe | ANZEx 17.3006X | ALL | 6788 KB | |
| Baseefa IECEx Certificate of Conformity | IECEx BAS 06.0058 | ALL | LINK | --- |
| Brasil TUV Rheinland Brazil | TÜV 13.1129 | ALL | 1172 KB | |
| CML IECEx Certificate of Conformity | IECEx CML 19.0093X | ALL | LINK | --- |
| Canada FM Certificate of Conformity | FM 18 CA 0106X | ALL | 360 KB | |
| Canada UL cUL | E106378 cUL (QUZW7) | ALL | LINK | --- |
| China SITIIAS CCC Ex Certificate | 2020322316000697 (Singapore) | ALL | 1336 KB | |
| DNV Marine | TAA00001WX | ALL | 106 KB | |
| Europe Baseefa ATEX | Baseefa 06 ATEX 0252 | ALL | 5220 KB | |
| Europe TUV Nord ATEX Category 3 G | TÜV 99 ATEX 1499X | ALL | 1999 KB | |
| India PESO (India) CCOE | A/P/HQ/KA/104/6092 (P576842) | ALL | 106 KB | |
| Japan CML | CML 18JPN2001 | ALL | 243 KB | |
| Korea KOSHA | 15-AV4BO-0595 | ALL | 650 KB | |
| South Africa MASC | MASC MS/17-0868 | ALL | 742 KB | |
| USA FM | CoC 3028278 | ALL | 43 KB | |
| USA UL | E106378 UL (QUZW) | ALL | LINK | --- |
| Ukraine SERTIS Ex | SC 21.0646 X | ALL | 12351 KB | |
| United Kingdom CML UK-Type Examination Certificate UKEX Category (1) D UKEX Category (1) G UKEX Category (M1) | CML 21UKEX22102 | ALL | 167 KB | |
| exida Functional Safety Assessment | P+F 1109-099-C R028 V1R0 | ALL | 380 KB | |
| Control Drawings | ||||
| Control drawing UL / Control drawing UL | ALL | 41 KB | ||
| Control drawing FM / Control drawing FM | ALL | 84 KB | ||
| Declaration of Conformity | ||||
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-0062D | ALL | 76 KB | |
İlişkili Ürünler: KFD0-SD2-Ex1.1180
| Matching System Components | ||||||
|---|---|---|---|---|---|---|
|
||||||
| Accessories | ||||||
|
||||||
|
||||||
|
||||||
Choose from various selection criteria like safety integrity level, performance level, device function, and signal type and find the SIL/PL assessed device that you are looking for.
Pepperl+Fuchs Elektronik San. ve Tic. Ltd. Şti.
Atatürk Mah. Şeref Sok. No: 9
34758 Ataşehir
Türkiye
+90 216 577 2250
© 2024 Tüm Hakları Saklıdır.
Pepperl+Fuchs, endüstriyel sensörlerin üretimi ve geliştirilmesinde küresel otomasyon pazarının lider firmalarından biridir.Yenilikçi yaklaşım, kaliteden ödün vermeme ve istikrarlı büyüme 70 yıldan beri devam eden başarımızı garanti etmektedir. Pepperl+Fuchs’un dünya çapında 6.300 çalışanı mevcuttur ve Almanya, ABD, Singapur, Macaristan, Endonezya ve Vietnam’da çoğu ISO 9001 sertifikalı, üretim tesisleri bulunmaktadır.