Bullet WirelessHART Adapter WHA-BLT-F9D0-N-A0-GP-1
- Cast aluminum housing
- Loop powered
- Direct mounting on HART or 4 mA ... 20 mA field device
- Encapsulated antenna
- Up to 8 field devices in multidrop
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Tam veri sayfasını PDF olarak indirin:
Veri sayfası alıntısı: Teknik veriler WHA-BLT-F9D0-N-A0-GP-1
| Supply | ||
|---|---|---|
| Rated voltage | 7 ... 32 V DC | |
| Rated current | < 1 mA , max. 25 mA | |
| Electrical specifications | ||
| Output rated operating current | 3.2 ... 25 mA | |
| Supply | loop power for field devices voltage: 1 ... 2.5 V DC, adjustable in steps of 0.5 V |
|
| Input | ||
| Connection | - 5 wires, 600 mm long, exiting from male thread NPT1/2 - 1 external grounding point |
|
| HART communication | ||
| Protocol | HART 7.1, backward compatible | |
| Number of devices | up to 8 HART field devices (depending on installation) | |
| Output | ||
| Interface | internal antenna | |
| Communication | WirelessHART specifications - physical layer: IEEE 802.15.4.2006 - frequency band: 2.4 GHz (ISM band, licence free) - maximum transmit power: +10 dBm - outdoor transmission range: 235 m - communication standard: WirelessHART acc. to IEC 62591 |
|
| Directive conformity | ||
| Radio and telecommunication terminal equipment | The usage of 2.4 GHz equipment is bound to local restrictions. Ensure that restrictions allow usage of this product before commisioning. | |
| Directive 2014/53/EU | EN 300 328 V2.1.1:2016 EN 301 489-1 V2.2.0:2017 EN 301 489-17 V3.2.0:2017 |
|
| FCC CFR47 Part 15 B and C | ANSI C63.4-2003 , FCC ID: X89-WA1101 | |
| Conformity | ||
| Degree of protection | IEC 60529:2013 | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Relative humidity | max. 100 % | |
| Mechanical specifications | ||
| Degree of protection | IP67 | |
| Material | aluminum alloy with polyurethane enamel paint | |
| Mass | 460 g | |
| Dimensions | 60.8 x 60.8 x 100 mm (l x w x h) | |
| International approvals | ||
| FM approval | FM 17 NUS 0010 | |
| Control drawing | 116-0425 (cFMus) | |
| CSA approval | FM 17 NCA 0004 | |
| Control drawing | 116-0425 (cFMus) | |
| General information | ||
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 11.0 | 27219290 |
| ECLASS 10.0.1 | 27219290 |
| ECLASS 9.0 | 27219290 |
| ECLASS 8.0 | 27219290 |
| ECLASS 5.1 | 27242692 |
| ETIM 8.0 | EC002584 |
| ETIM 7.0 | EC002584 |
| ETIM 6.0 | EC002584 |
| ETIM 5.0 | EC002584 |
| UNSPSC 12.1 | 39121008 |
Documents: WHA-BLT-F9D0-N-A0-GP-1
Approvals+Certificates: WHA-BLT-F9D0-N-A0-GP-1
| Statements of compliance | Sertifika No. | Dosya Tipi | Dosya Boyutu |
|---|---|---|---|
| EU-Declaration of Conformity / EU-Konformitätserklärung | DOC-3837B | 383 KB | |
| Control drawings | |||
| Control drawing CSA / Control drawing CSA | 187 KB | ||
Commissioning: WHA-BLT-F9D0-N-A0-GP-1
| Commissioning files | Dil | Dosya Tipi | Dosya Boyutu |
|---|---|---|---|
| FHX WirelessHART Adapter WHA-BLT* "Bullet" / FHX WirelessHART Adapter WHA-BLT* "Bullet" | ALL | ZIP | 1115 KB |
Software: WHA-BLT-F9D0-N-A0-GP-1
| Drivers | Sürüm Bilgileri | Dosya Tipi | Dosya Boyutu |
|---|---|---|---|
| DD WirelessHART Adapter WHA-BLT* "Bullet" / DD WirelessHART Adapter WHA-BLT* "Bullet" | ZIP | 3513 KB | |
| Device type managers | |||
| DTM WirelessHART Adapter WHA-BLT* "Bullet" / DTM WirelessHART Adapter WHA-BLT* "Bullet" | ZIP | 16481 KB | |
İlişkili Ürünler: WHA-BLT-F9D0-N-A0-GP-1
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
Function: WHA-BLT-F9D0-N-A0-GP-1
The device upgrades a conventional HART or 4 ... 20 mA field device with a WirelessHART interface.
The supply is ensured via loop power. The adapter is suitable for use in a nonhazardous area and it can be used directly on the field device or it can be integrated in the 4 ... 20 mA loop. Up to 8 HART field devices can be connected to each other in multidrop mode.
The device can be programmed with a configuration tool easily (DTM or DD).
The BULLET is the only WirelessHART adapter on the market in an Ex d housing. Simply connect the BULLET to your field device and enable efficient, wireless signal transmission.
Pepperl+Fuchs Elektronik San. ve Tic. Ltd. Şti.
Atatürk Mah. Şeref Sok. No: 9
34758 Ataşehir
Türkiye
+90 216 577 2250
Pepperl+Fuchs, endüstriyel sensörlerin üretimi ve geliştirilmesinde küresel otomasyon pazarının lider firmalarından biridir.Yenilikçi yaklaşım, kaliteden ödün vermeme ve istikrarlı büyüme 70 yıldan beri devam eden başarımızı garanti etmektedir. Pepperl+Fuchs’un dünya çapında 6.300 çalışanı mevcuttur ve Almanya, ABD, Singapur, Macaristan, Endonezya ve Vietnam’da çoğu ISO 9001 sertifikalı, üretim tesisleri bulunmaktadır.