Fabrika Otomasyonu
Proses Otomasyonu

HART Termination Board HiSHPMM/64/CONA-01

HiSHPMM/64/CONA-01
  • 64-channel
  • 24 V DC supply
  • Connection of two Multiplexers to HART enabled Honeywell TDC 3000 FTA's
  • Redundant power supply connections
  • Dual RS 485 connections
  • HART loop connection via four 20-pin flat ribbon connectors
  • Compact design

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Tam veri sayfasını PDF olarak indirin:


Veri sayfası alıntısı: Teknik veriler  HiSHPMM/64/CONA-01

Supply
Rated voltage24 V DC
Fusing2 A , 5 x 20 mm (0.2 x 0.8 inch)
Power dissipation0.7 W , with Multiplexer
Reverse polarity protectionyes
HART signal channels (intrinsically safe)
HART signal channels
Number of channels64 unbalanced signal loops
Redundancy
Supplyyes
Galvanic isolation
HART signal channels30 V DC
Ambient conditions
Ambient temperature-20 ... 55 °C (-4 ... 131 °F)
Relative humidity5 ... 90 %, non-condensing
Mechanical specifications
Core cross section2.5 mm2 (16 AWG)
ConnectionHART loop interface: connectors depending on version
RS-485 interface: removable screw terminals
power: removable screw terminals
Massapprox. 500 g
Dimensions152 x 121 x 142 mm (6 x 4.75 x 5.6 inch) (W x H x D) , depth including module assembly with HiDMux2700
Height121 mm
Width152 mm
Depth142 mm
MountingDIN rail mounting
General information
Supplementary informationObserve the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

Classifications

SystemClasscode
ECLASS 13.027210190
ECLASS 12.027210190
ECLASS 11.027210190
ECLASS 10.0.127210190
ECLASS 9.027210190
ECLASS 8.027210190
ECLASS 5.127242690
ETIM 9.0EC001485
ETIM 8.0EC001485
ETIM 7.0EC001485
ETIM 6.0EC001485
ETIM 5.0EC001485
UNSPSC 12.139121008

Details: HiSHPMM/64/CONA-01

Function

The Termination Board is designed to complement the I/O termination panels and provide access to all HART information.

The HART Termination Board provides a robust solution for on-line HART communications, interfaces up to 64 field located HART devices, and it allows a connection to H-System Termination Boards. This is ideal for retrofitting existing installations and maintains all existing hardware and field wiring.

Product Documentation: HiSHPMM/64/CONA-01

Dil Seçeneği:
ManualsDilDosya TipiDosya Boyutu
Manual DTM description HiDMux2700ENGPDF2278 KB
Manual HiDMux2700ENGPDF8581 KB

İlişkili Ürünler: HiSHPMM/64/CONA-01

Accessory of
32-channel, 24 V DC supply, HART field device input (revision 5 to 7), RS-485 interface, Up to SIL 3 acc. to IEC/EN 61508pa