选择您所在的国家/地区
停售
CMCM Corrosion Monitoring CorrTran MV
主要优势一览
- Please see Metal Samples for purchase: http://www.alspi.com
- On-line corrosion monitoring, multivariable
- 2-wire, 4 mA ... 20 mA transmitter, HART interface
- General corrosion, localized corrosion (pitting), and conductance monitoring via HART
- Stern-Geary B value automatically updated for changes in the process
显示详情






注意
在转换前以倍加福有限公司或倍加福股份公司名义发布的所有产品文档(如证书、符合性声明等)也适用于倍加福欧洲公司。
EN
- EN
- DE
CMCM 技术数据
| Equipment architecture | 4 ... 20 mA output with HART protocol |
| Measured variable | Corrosion update time: - general, localized and conductance: 21 minutes - general and conductance: 4 minutes - local and conductance: 17 minutes |
| Output signal | 4 ... 20 mA with HART protocol |
| Electrical connection | 4 ... 20 mA with HART, 2-wire | |
| Supply voltage | 2-wire HART (standard): - current consumption 4 ... 22.5 mA - min. terminal voltage 11 V (at 20 mA) without alarm / (at 22.5 mA) with alarm - max. terminal voltage 30 V | |
| Current consumption | 4 ... 22.5 mA |
| Maximum measured error | Excitation voltage < 0.05% of full span Corrosion current measurement <0.2% of full span | |
| Configuration | The adjustments and scaling can be done using a handheld terminal or the operating software. General corrosion rate: - range: max. 1000 mils/year, default 40 mils/year - Zero/span adjustments available with HART Localized corrosion (pitting) factor: - default: 0.0 ... 1.0 - low pitting: 0.0 ... 0.3 - high pitting: 0.3 ... 1.0 | |
| Alarm configuration | output signal when measurement is out of range: - none - high (22.5 mA), autoreset (default) - high (22.5 mA), manual reset | |
| Factory settings | B value (Stern Geary value): 25.6 mV K value (corrosion constant): 11800 (2e- in reaction) | |
| Response time | depends on configuration - min. 4 min - max. - 21 min |
| Installation conditions | see technical information (TI) | ||||||||||
| Ambient conditions | |||||||||||
| |||||||||||
| Process conditions | |||||||||||
| |||||||||||
| Degree of protection | IP66, NEMA 4X |
| Dimensions | see section dimensions | |
| Mass | approx. 500 g , transmitter housing | |
| Material | housing: aluminum process connections: stainless steel 1.4401/316L or Nylon probes: stainless steel 1.4401/316L Hastelloy C or epoxy glass, fill material epoxy end cap seal: glass or epoxy electrode material: see section references to type code, table 1 o-ring: Viton (standard) or Kalrez (on request) |
| Explosion-hazardous area | LCIE 05 ATEX 6097X , for additional certificates see www.pepperl-fuchs.com | |
| CSA approval | cCSAus certified for USA and Canada; Certificate no. 1563164 IS: Cl. I, II, III; Div. 1, 2; Groups A-G EX: Cl. I; Div. 1, 2; Groups A-D NI: Cl. I, II, III; Div. 2; Groups A-G | |
| Type of protection |
相关页面
您是否正在寻找更多信息?请随时通过相关页面了解详情。