选择您所在的国家/地区
S1SD-1DI-1R Switch Amplifier
主要优势一览
- 1-channel signal conditioner
- 24 V DC supply
- Input for 2- or 3-wire sensors or AC/DC voltage sources
- Relay contact output
- Timer function
- Configurable by DIP switches
- Connection via screw terminals
显示详情
首选类型











注意
在转换前以倍加福有限公司或倍加福股份公司名义发布的所有产品文档(如证书、符合性声明等)也适用于倍加福欧洲公司。
EN
- EN
- DE
- ES
- FR
- PL
S1SD-1DI-1R 技术数据
| Signal type | Digital Input |
| Connection | Power Bus or terminals 1-, 2+ | |
| Rated voltage | Ur | 16.8 ... 31.2 V DC |
| Power dissipation | 0.6 W | |
| Power consumption | 1.1 W |
| Connection side | field side | |||||||||||||||||||||||||
| NAMUR sensor | ||||||||||||||||||||||||||
| ||||||||||||||||||||||||||
| Mechanical contact | ||||||||||||||||||||||||||
| ||||||||||||||||||||||||||
| SN sensor | ||||||||||||||||||||||||||
| ||||||||||||||||||||||||||
| 2-wire DC sensor | ||||||||||||||||||||||||||
| ||||||||||||||||||||||||||
| S0 sensor | ||||||||||||||||||||||||||
| ||||||||||||||||||||||||||
| NPN sensor | ||||||||||||||||||||||||||
| ||||||||||||||||||||||||||
| PNP sensor | ||||||||||||||||||||||||||
| ||||||||||||||||||||||||||
| AC/DC voltage source | ||||||||||||||||||||||||||
| ||||||||||||||||||||||||||
| AC/DC voltage source | ||||||||||||||||||||||||||
| ||||||||||||||||||||||||||
| AC/DC voltage source | ||||||||||||||||||||||||||
| ||||||||||||||||||||||||||
| Connection side | control side | |
| Connection | terminals 3, 4: | |
| Output | signal, relay | |
| Contact loading | 253 V AC/2 A/cos φ > 0.7; 126.5 V AC/2 A/cos φ > 0.7; 30 V DC/2 A resistive load | |
| Minimum switch current | 2 mA / 24 V DC | |
| Energized/De-energized delay | ≤ 20 ms / ≤ 20 ms | |
| Mechanical life | 107 switching cycles |
| Switching frequency | ≤ 10 Hz |
| Output/power supply | safe electrical isolation by reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff test voltage 3 kV, 50 Hz, 1 min | |
| Input/Other circuits | safe electrical isolation by reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff test voltage 3 kV, 50 Hz, 1 min |
| Control elements | DIP switch | |
| Configuration | via DIP switches | |
| Labeling | space for labeling at the front |
| Electromagnetic compatibility | |||||
| |||||
| Low voltage | |||||
| |||||
| Degree of protection | IEC 60529:2001 | |
| Protection against electrical shock | EN 61010-1:2010 |
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) | |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Damaging gas | designed for operation in environmental conditions acc. to ISA-S71.04-1985, severity level G3 |
| Degree of protection | IP20 | ||||||||||
| Connection | screw terminals | ||||||||||
| Core cross section | 0.5 ... 2.5 mm2 (20 ... 14 AWG) | ||||||||||
| Mass | approx. 60 g | ||||||||||
| Dimensions | 6.2 x 97 x 107 mm (0.24 x 3.82 x 4.21 inch) (W x H x D) , housing type S1 | ||||||||||
| |||||||||||
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 | ||||||||||
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
相关页面
您是否正在寻找更多信息?请随时通过相关页面了解详情。
