选择您所在的国家/地区
FB9206D3 Power Supply
主要优势一览
- Power supply for 24 V DC
- Installation in suitable enclosures in Zone 1
- Module can be exchanged under voltage (hot swap)






注意
在转换前以倍加福有限公司或倍加福股份公司名义发布的所有产品文档(如证书、符合性声明等)也适用于倍加福欧洲公司。
EN
- EN
- DE
FB9206D3 技术数据
| Occupied slots | 2 |
| Connection | wired to Ex e terminals via backplane | |
| Maximum safe voltage Um | 60 V DC (SELV/PELV) common mode | |
| Input voltage range | U | 18 ... 32 V DC (SELV/PELV) |
| Power dissipation | 4.7 W at 100 % load 3.8 W at 50 % load | |
| Power consumption | max. 44 W | |
| Inrush current | 6 A (30 ms) 15 A (20 µs) |
| Voltage | 5.4 V DC +/- 5% , 12 V DC + 4/- 2% | |
| Power | P5V ≤ 5.4 W, P12V ≤ 39 W - P5V |
| Power supply/Output | basic insulation according to IEC/EN 61010-1, rated insulation voltage 60 Veff |
| LED indication | LED green: OFF in case of loss of 24V or 12V or 5V |
| Electromagnetic compatibility | |||||
| |||||
| Galvanic isolation | EN 61010-1:2010 | |
| Degree of protection | IEC 60529 | |
| Environmental test | EN 60068-2-14 | |
| Shock resistance | EN 60068-2-27 | |
| Vibration resistance | EN 60068-2-6 | |
| Damaging gas | EN 60068-2-42 | |
| Relative humidity | EN 60068-2-78 |
| Ambient temperature | -40 ... 60 °C (-40 ... 140 °F) | |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Relative humidity | 95 % non-condensing | |
| Shock resistance | shock type I, shock duration 11 ms, shock amplitude 15 g, number of shocks 18 | |
| Vibration resistance | frequency range 10 ... 150 Hz; transition frequency: 57.56 Hz, amplitude/acceleration ± 0.075 mm/1 g; 10 cycles frequency range 5 ... 100 Hz; transition frequency: 13.2 Hz amplitude/acceleration ± 1 mm/0.7 g; 90 minutes at each resonance | |
| Damaging gas | designed for operation in environmental conditions acc. to ISA-S71.04-1985, severity level G3 |
| Degree of protection | IP20 (module) , a separate housing is required acc. to the system description | ||||||||||
| Mass | approx. 970 g | ||||||||||
| Dimensions | |||||||||||
| |||||||||||
| EU-type examination certificate | Presafe 19 ATEX 14059U | ||||
| |||||
| Wait time | wait time before removing the device: 7 min For further information see instruction manual. | ||||
| Directive conformity | |||||
| |||||
| ATEX approval | Presafe 19 ATEX 14059U | |||||||
| IECEx approval | ||||||||
| ||||||||
| System information | The module has to be mounted in appropriate backplanes (FB92**) in Zone 1, 2, or outside hazardous areas. Observe the corresponding EC-type examination certificate. | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. |
相关页面
您是否正在寻找更多信息?请随时通过相关页面了解详情。
