OBG5000-R101-2EP-IO-V31 Retroreflective sensor (glass)

Panoramica dei principali vantaggi

Miniature design with versatile mounting options
Detects transparent objects, i.e., clear glass, PET and transparent films
Two machines in one: clear object detection or reflection operating mode with long range
High degree of protection IP69K
IO-Link interface for service and process data

Mostra di più

Product photo: Retroreflective sensor (glass) OBG5000-R101-2EP-IO-V31

Dimensions: Retroreflective sensor (glass) OBG5000-R101-2EP-IO-V31

Connection Assignment: Retroreflective sensor (glass) OBG5000-R101-2EP-IO-V31

Nota

Tutti i documenti relativi ai prodotti, come ad esempio certificati, dichiarazioni di conformità ecc., pubblicati prima della conversione con il nome Pepperl+Fuchs GmbH o Pepperl+Fuchs AG, si applicano anche a Pepperl+Fuchs SE.

DE
EN
ES
FR
IT

Scheda tecnica Funzione Classificazione Informative Literature Product Documentation Design / Simulation Certificazioni Software Prodotto correlati

Dati tecnici di OBG5000-R101-2EP-IO-V31

Retroreflective sensor with polarization filter for clear object detection

Effective detection range		0 ... 3.5 m in TEACH mode ; 0 ... 5 m at switch position "N"
Reflector distance		0 ... 3.5 m in TEACH mode ; 0 ... 5 m at switch position "N"
Threshold detection range		6 m
Reference target		H85-2 reflector
Light source		LED
Light type		modulated visible red light
LED risk group labelling		exempt group
Diameter of the light spot		approx. 170 mm at a distance of 3.5 m
Opening angle		approx. 5 °
Ambient light limit		EN 60947-5-2

MTTF_d		600 a
Mission Time (T_M)		20 a
Diagnostic Coverage (DC)		0 %

Operation indicator		LED green: constantly on - power on flashing (4Hz) - short circuit flashing with short break (1 Hz) - IO-Link mode
Function indicator		Yellow LED: Permanently lit - light path clear Permanently off - object detected Flashing (4 Hz) - insufficient operating reserve
Control elements		Teach-In key
Control elements		5-step rotary switch for operating modes selection
Contrast detection levels		10 % - clean, water filled PET bottles 18 % - clear glass bottles 40 % - colored glass or opaque materials Adjustable via rotary switch

Operating voltage	U_B	10 ... 30 V DC
Ripple		max. 10 %
No-load supply current	I₀	< 25 mA at 24 V supply voltage
Protection class		III

Interface type		IO-Link ( via C/Q = pin 4 )
IO-Link revision		1.1
Device ID		0x110A01 (1116673)
Transfer rate		COM2 (38.4 kBit/s)
Min. cycle time		2.3 ms
Process data width		Process data input 2 Bit Process data output 2 Bit
SIO mode support		yes
Compatible master port type		A

Switching type		The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally open / dark-on, PNP normally closed / light-on, IO-Link /Q - Pin2: NPN normally closed / light-on, PNP normally open / dark-on
Signal output		2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
Switching voltage		max. 30 V DC
Switching current		max. 100 mA , resistive load
Usage category		DC-12 and DC-13
Voltage drop	U_d	≤ 1.5 V DC
Switching frequency	f	500 Hz
Response time		1 ms

Communication interface		IEC 61131-9
Product standard		EN 60947-5-2

UL approval

E87056 , cULus Listed , class 2 power supply , type rating 1

Ambient temperature		-20 ... 60 °C (-4 ... 140 °F)
Storage temperature		-40 ... 70 °C (-40 ... 158 °F)

Degree of protection

IP67 / IP69 / IP69K

Connection

M8 x 1 connector, 4-pin

Material

Housing		PC (Polycarbonate)
Optical face		PMMA

Mass

approx. 10 g

Dimensions

Height		41.4 mm
Width		13.9 mm
Depth		18.3 mm

Note generali