OQT350-R201-2EP-IO-0,3M-V31-L Triangulation sensor (SbR)

Panoramica dei principali vantaggi

Medium design with versatile mounting options
Multi Pixel Technology (MPT) - flexibility and adaptability
Reduction of device variety - several switch points within one sensor
Reliable detection of all surfaces, independent of color and structure
Low sensitivity to target color
IO-Link interface for service and process data

Mostra di più

Product photo: Triangulation sensor (SbR) OQT350-R201-2EP-IO-0,3M-V31-L

Dimensions: Triangulation sensor (SbR) OQT350-R201-2EP-IO-0,3M-V31-L

Nota

Tutti i documenti relativi ai prodotti, come ad esempio certificati, dichiarazioni di conformità ecc., pubblicati prima della conversione con il nome Pepperl+Fuchs GmbH o Pepperl+Fuchs AG, si applicano anche a Pepperl+Fuchs SE.

DE
EN
ES
FR

Scheda tecnica Funzione Classificazione Product Documentation Design / Simulation Certificazioni Software Prodotto correlati

Dati tecnici di OQT350-R201-2EP-IO-0,3M-V31-L

Measuring sensor with multiple switch points

Detection range

60 ... 350 mm

Detection range min.

60 ... 100 mm

Detection range max.

40 ... 400 mm

Adjustment range

100 ... 350 mm

Reference target

standard white, 100 mm x 100 mm

Light source

laser diode

Light type

modulated visible red light

Laser nominal ratings

Note		LASER LIGHT , DO NOT STARE INTO BEAM
Laser class		1
Wave length		680 nm
Beam divergence		> 5 mrad, d63 < 2,8 mm in the range of 350 mm ... 800 mm
Pulse length		5.5 µs
Repetition rate		approx. 2.4 kHz
max. pulse energy		< 40 nJ

Black-white difference (6 %/90 %)

< 2 %

Diameter of the light spot

approx. 3 mm at a distance of 350 mm

Opening angle

approx. 0.3 °

Ambient light limit

EN 60947-5-2 : 45000 Lux

MTTF_d		560 a
Mission Time (T_M)		20 a
Diagnostic Coverage (DC)		0 %

Operation indicator		LED green: constantly on - power on flashing (4Hz) - short circuit flashing with short break (1 Hz) - IO-Link mode
Function indicator		LED yellow: constantly on - switch output active constantly off - switch output inactive
Control elements		Teach-In key
Control elements		5-step rotary switch for operating modes selection

Operating voltage	U_B	10 ... 30 V DC
Ripple		max. 10 %
No-load supply current	I₀	< 16 mA at 24 V supply voltage
Protection class		III

Interface type		IO-Link ( via C/Q = pin 4 )
IO-Link revision		1.1
Device profile		Identification and diagnosis Smart Sensor type 0
Device ID		0x111812 (1120274)
Transfer rate		COM2 (38.4 kBit/s)
Min. cycle time		2.3 ms
Process data width		Process data input 2 Bit Process data output 2 Bit
SIO mode support		yes
Compatible master port type		A

Switching type		The default setting is: C/Q - Pin4: NPN normally open, PNP normally closed, IO-Link Q2 - Pin2: NPN normally-open, PNP normally-closed
Signal output		2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
Switching voltage		max. 30 V DC
Switching current		max. 100 mA , resistive load
Usage category		DC-12 and DC-13
Voltage drop	U_d	≤ 1.5 V DC
Switching frequency	f	217 Hz
Response time		2.3 ms

Communication interface		IEC 61131-9
Product standard		EN 60947-5-2
Laser safety		EN 60825-1:2014

UL approval		E87056 , cULus Listed , class 2 power supply , type rating 1
CCC approval		CCC approval / marking not required for products rated ≤36 V
FDA approval		IEC 60825-1:2014 Complies with 21 CFR 1040.10 and 1040.11 except for conformance with IEC 60825-1 Ed. 3 as described in Laser Notice 56, dated May 8, 2019.

Ambient temperature		-40 ... 60 °C (-40 ... 140 °F) , cable, fixed installation -20 ... 60 °C (-4 ... 140 °F) , movable cable not appropriate for conveyor chains
Storage temperature		-40 ... 70 °C (-40 ... 158 °F)

Degree of protection

IP67 / IP69 / IP69K

Connection

fixed cable 300 mm with M8 x 1 male connector; 4-pin

Material

Housing		PC (Polycarbonate)
Optical face		PMMA

Mass

approx. 51 g

Dimensions

Height		61.7 mm
Width		15 mm
Depth		41.7 mm

Cable length

0.3 m

Note generali